@@FredMoto ruclips.net/video/gc1ukobUY2Q/видео.html yan ang totoo complete sir..pero ok din naman ang video ni sir fredmoto..kulang sa rpm wire conneksyon..hinhintay ko pa naman ko san ikabait talaga yun rpm wire
Boss new subscriber here.. ask lang po ako boss.. if nagpalit ako ng polarizer ng digital display ko po.. when checking ba.. if ok pagka palit ko ng polarizer.. connect ko lng ung positive (red) at negative (green) sa 12v power supply?.. sana masagot mo po.. tnx in advanve..
Really useful video for help with labelling the wires, came in very handy! One question though, what do you do if holding the left button and turning key to calibrate speedo doesn’t work? That 1712 screen will not come on no matter what I do 😫
Good day paps. Salamat sa mga video mo malaking tulong sa mga ka sz natin. Ask ko lang kung kasya ba yung digital speedometer sa stock headlight natin? Maraming salamat. Ridesafe. Godbless.
Maganda sa speedometer na ito may naka abang na wiring para sa gear indicator, kaso lang sa motor ko idol negative sya dahil wlang built in gear indicator ang yamaha sz,. Neutral lang tlga kaya disable ko yong wiring para sa gear indicator.
@@FredMoto kaya nga bossing eh. Yamaha sz din kasi gamit ko boss. Gusto kong gayahin mga modification mo boss eh. Thnk you boss sa reply God bless you boss..
You stated if you want to work the gear indicator to your Yamaha you need to install a gear sensor. Is there a gear sensor that can be installed and hooked up to this LCD display?
Boss tanong lang nagpakabit din ako ng ganyan. Pero ayaw maalis ng ilaw sa check engine tapos yung odometer niya narereset to 0, same with the clock reset to 12:00 kapag naturn off susi or ignition. Pano kaya possible na mali don?
boss hinde ba maka drain yan ng battery kasi wala sya swicth para e off kasi direct sya?? tsaka pag patay ang engine ng paano sya mag off ang digital need ba e switch off??
Hello. thanks for the video. can you tell me how is to connect the rpm wire? I can't seem to get the rpm. I have the same counter. thank you in advance
Paps same tayo ng panel pero raider j 115 gamet ko 4 speed lang... Hinde nagana ung fuel ko palaging full tank sa indicator inde kaya ayusen ng technician na nag install not sure baka may mali or not compatible lang sa panel... Any advice baka sakaling gumana 😁
Madali lang yon paps basta alam mo na kong ano ang wire sa fuel indicator ng gauge. Isa isahin mo itap sa stock wiring ng motor hanggang sa tumama yong indicator. Kong nahihirapan ka pwede mo ko imessage sa fb bka sakaling matulong kita.
Sir tanong ko lang kung saan mo nakuha yung mga settings ng speedometer mo? Pareho kasi tayo ng speedometer pero yung sa akin walang reading yung speedometer at hindi nagbabago yung oras ng clock
Yong speedometer mo sir nakakabit po ba yong sensor at magnet nyo? At sa clock nman po kaya naka direct sa battery yong ground at positive para hindi mareset yong settings.
Naka kabit po yung 2 magnet sa disc inilapit ko na din yung sensor baka nasa 2mm na lang yung gap nila at yung sa clock naman yung red wire sa battery naka connect pati yung green ang problema sa clock hindi nagbabago yung oras kung ano yung sinet ko hindi na sya gumagalaw
@@jerichoarceo349 hindi po kaya baliktad yong magnet? Yong sa clock mo paps tanggalin mo muna yong negative sa battery tapos kabit mo ulit then antayin mo po gumalaw yong clock pag wala parin ulitin nyo lang po.
@@jerichoarceo349 baka may sira na po paps yong sensor nyo. Ganon po pag namamatay mag rereset ulit yan tapos kabit mo ulit hanggang sa gumana na yong time.
Yes sir you need to use the sensor and magnets of digital gauge, If you use stock speedometer sensor of your bike you cannot calibrate to get the correct speed.
@@FredMoto I hooked up the speedo wire to the black/white? on the 3 wire plug (mine uses a hall sensor) You might have to play around with the settings to get the correct speed, as I didn't want start drilling stuff just to mount magnets and extra wiring.
Any way to input tire size? What do the codes entered mean? code: 1Cc- 1712 (why?), code: 2c---01 (why/what?), 3c---4 (?), 4e---2 (??) code: 6---3 (3 cans of beer?)
No, it depends in every design/model that you will buy. This wiring is only for this specific digital meter,every design has different wiring and color coding but I guess my video will help as guide since digital meters has same number of wires and connections.
Boss isang tanong pa, may idea kaba kung saan naka derekta ung wire ng rpm? Ung sa sz ko kase boss ayaw gumana ng rpm nya kahit sa stock na speedometer.. Alam mo ba kung saan o ano isira ng sensor non sa makin?
Sge sir unli tanong po. Naka connect ang rpm yong iba sa pulser minsan nman po sa igtionion coil. Kong hindi na po gumagana yong rpm nyo posible na nasunog na yong diode ng rpm dahil sa sobrang lakas ng power na pumapasok posible din na sira na ang rectifier dahil malakas na ang power na sinusupply nya sa rpm. (Para sa battery operated)
Ang problema po pala palang kulang ung wire na pag kakabitan, sa stock po siba may isang black pa na nabakante, pang kinakabit ko ung lumang speedo gumagana nmn, pero pag hinugot ko ung black nawawala, ang problema po diko alam kung saan ikakabit umg black n un sa stoxk ppunta sa digital
Hi, I have installed this metter. Everything is fine but faving one issue. My meter fuel gauge show full fuel or empty. It not showing between full nad empty. Is there any issue in connections. Plz guide.
Backlight and clock settings
ruclips.net/video/V2H0kZ6VtG4/видео.html
Sir San mamaka bili ng digital gauge ng sz
As soon as I saw you on the road, I knew exactly where you are. The Philippines!
Eto plng nakita kung super informative... Ung iba gulo nung pagkaexplain. Ty boss.
Super thank you boss ♥️
Sir may kulang po..mas marami pa po iba complete detaisl..hindi po pinakita ang coneksyon ng rpm wire at san ikabit...
@@rengiep28 nasa video kong saan nakaconnect lahat ng wire.
@@FredMoto ruclips.net/video/gc1ukobUY2Q/видео.html yan ang totoo complete sir..pero ok din naman ang video ni sir fredmoto..kulang sa rpm wire conneksyon..hinhintay ko pa naman ko san ikabait talaga yun rpm wire
Best tutorial I've found!! 👌🏼 thank you.
LODI ! NAPAKA LUPET MO TALAGA !!
Haha! Lodi ka tlga
Yown salamat sa video paps, pag back to normal na tayo papalit na din ako ng digital hehe. Rs always paps
Welcome paps angas ni sz pag naka digital sabay sa mga bagong model ngayon.
galing mo talaga paps👍👍👍 paps kong bibili ko ganyan digital pede ba ikaw mag install?
Hi,Is the calibrate codes are common for all bikes???
Salamat parang gusto kona mag palit
Palit kna paps! Haha Ganda yan kay sz. 😍
ang galing mo idol paps,,,,,salamat sa video ride safe
maraming salamat idol. gagawa pa ko maraming videos.
Should I get this for my Yamaha aerox naked 50cc and doas it show fuel or Do anyone know some smaller cheap speedometers? Great video 👍
Awesome video thank you. One question on how did you get the code 1712 and the rest of the parameters for programming, can you help me with that pls?
Hold the left button for 10 seconds then turn the key to the on position
1c for accurate speed same with 2C . 3C for 2stroke or 4stroke. 4E gas indicator,
@@Peak223 awesome
Boss new subscriber here.. ask lang po ako boss.. if nagpalit ako ng polarizer ng digital display ko po.. when checking ba.. if ok pagka palit ko ng polarizer.. connect ko lng ung positive (red) at negative (green) sa 12v power supply?.. sana masagot mo po.. tnx in advanve..
Maraming Salamat idol👌❤️💪🔥
Really useful video for help with labelling the wires, came in very handy!
One question though, what do you do if holding the left button and turning key to calibrate speedo doesn’t work? That 1712 screen will not come on no matter what I do 😫
Same parehas tayu Boss, anong ginawa mo sayo?
Ang galing ah
Ayos na ayos paps. Salamat
Thanks paps! Subscribe 🤗
Astig. .ang ganda idol. .
Thank you idol!
Sir.. Ipakita mo nman yong mga wiring code from stock to digital pra masundan ko.. Yamaha dn kc gmit ko.. Thanks.. God bless...
Meron po sa video sir.
Nice 1 brother .
Good day paps. Salamat sa mga video mo malaking tulong sa mga ka sz natin. Ask ko lang kung kasya ba yung digital speedometer sa stock headlight natin? Maraming salamat. Ridesafe. Godbless.
Kasya po sir, medyo maliit lang ng kunti itong digital sa stock pero swak nman po kahit stock headlight. Thanks sir. Ride safe din po.
@@FredMoto ask ko na rin paps kung pede ba yung nakita kong digital speedometer sa shopee? Katulad ba yun ng sayo?
Ganda paps. Btw paps anong ginamit mong head sz mo iba ata yan e.
Pang enduro yan paps, Meron ako video nyan.
Paps magandang gabe...tanung ko lang anung headlight gamit mo saan nabibili?heheeheh
Oo nga
Pops ask lang kung saan pwede umiskor nyan para sa Yamaha X1r. Thankeee po. Hehe
Available sa shapi o lazada Popsi. Bilhin mo yung kasama na speedometer sensor
@@FredMoto thanks a lot sa idea pops. Ridesafe lagi💯🙏
gandang tutorial, paps tanong lang sa calibration. APPLICABLE BA YAN SA RAIDER J 110 na motor?
or baka po may ibang CODES para sa ibang motor. salamat po
Applicable din paps mag babago lang po calibration setting depende kong saan naka pwesto yong magnet.
Pwede po gawa ka rin ng video how to install that digital panel to Honda CB110..
Is the oil light working on yours?
Lods taga san k? p install ako. nkabile nako e😁
Laking tulong😁😁😁
Thanks bro.
Bagong subscriber boss. S lahat po ba yang model ng SZ?
Pwede sa lahat sz yan boss may mga pag kaiba iba lang sa color ng wire ng version 1.
Boss may link kayo ng gear shift indicator sensor? Btw salamat sa video nyo si nki mahihirapan mag tunton ng wirings
Welcome boss. May video tutorial po ako nyan. Salamat ride safe po.
Idol tutorial naman po kung pano nyo napagana yung gear indicator nyang digital speedometer mo.. sana po mapagbigyan salamat boss .
Maganda sa speedometer na ito may naka abang na wiring para sa gear indicator, kaso lang sa motor ko idol negative sya dahil wlang built in gear indicator ang yamaha sz,. Neutral lang tlga kaya disable ko yong wiring para sa gear indicator.
@@FredMoto kaya nga bossing eh. Yamaha sz din kasi gamit ko boss. Gusto kong gayahin mga modification mo boss eh. Thnk you boss sa reply God bless you boss..
Saan ka nagpa gawa ng degital speed peromiter paps.
Sir my mbi2Li bng screen protektor pra jn s Digital Gauge ?
Any video for connecting all the in Kawasaki bajaj Rouser 135LS?
Napapalitan po ba neutral bulb ng ganitong digital guage. Nawala na po neutral.light indicator.
You stated if you want to work the gear indicator to your Yamaha you need to install a gear sensor.
Is there a gear sensor that can be installed and hooked up to this LCD display?
ah may magnet pala para sa speedo kala ko yung cable paren😅 eh pano yung sa gear nya lods
Check engine, wich wire on motorcycle?
Boss tanong lang nagpakabit din ako ng ganyan. Pero ayaw maalis ng ilaw sa check engine tapos yung odometer niya narereset to 0, same with the clock reset to 12:00 kapag naturn off susi or ignition. Pano kaya possible na mali don?
Hello sir meron kayo wiring diagram ng pang sporty? hehe salamat
Boss pano po kya pag sa raider pano po i ccalibrate ung meter ganun din po ba slamat
yes paps same lang po yan basta same model ng gauge.
Boss nainstal ko na pero my wire ba to na pwede iconnect pra di mamatay ung time nag rrestart kc pag inoff ko na eh bka my idea ka sir slamat
sir anung wire po yung para sa speedometer at fuel
Nice work man.
Thanks man.
Nice work
Thanks Bro.
Boss tatanong lang po kung pwede po ba ito ikabit sa honda wave 100r tnx sa response
Same lng b to sa honda cb110 pgkabit? Gawa k rn.boss for honda cb110
Bhai g ye metar CD 70 pa kam karta ha k ni
Sir ask lang po yung magnet nyo po ba dinikit mo lang? Di ba huhulog gamit ang glue? Or binutasan mo yung disk plate?
Hindi nman sya nataggal boss sa glue. Nilipat ko na sya ng pwesto inipit ko sa butas ng disk.
@@FredMoto binutasan mo yung disk nya boss?
@@kevinbual6534 hindi paps. Sa dating butas ng disk ko inipit.
Paps, ano magandang calibration sa gearbox sensor
boss hinde ba maka drain yan ng battery kasi wala sya swicth para e off kasi direct sya?? tsaka pag patay ang engine ng paano sya mag off ang digital need ba e switch off??
Hindi boss, pag nakapatay sa susian nakapatay din ang digital. Kaya lang may nakadirect sa battery para hindi mag reset ang settings
@@FredMoto copy boss thanks ridesafe
Hello. thanks for the video. can you tell me how is to connect the rpm wire? I can't seem to get the rpm. I have the same counter. thank you in advance
Hello, I have the same problem, did you find a solution?
@@omerfaruk4652 I plugged into one of the two stator wires and it works.
@@spawn31830 ok thank you, i will try
Paps new subscriber here. Link at description naman ng headlight mo.
Paps may video ako paano installation ng headlight, sa description may link don.
ganda sir, hm po total cost pati sa labor?
1,100 order ko sa shopee. ako lang ng kapit bali 1300 lahat kasama merienda hehe
bukod po b dun sa bibilhin s shopee my mga pyesa p po bng bibilhin s labas?
Wala na paps. Kasama na pati sensor don.
San nyo po kinonect Yung sensor Ng fuel para gumana
boss pwedi ba mag pa kabit ng digital saiyo at gear sensor
Which color wire for tachometer and engine check
Tachometer- Green w/ yellow
Check engine-Red w/ black
Paps pwde bah to ikabit sa er6f ninja 650 2016
San ka sa pasig sir?
Manggahan sir
Pwede po ba gamitin yung stock na speedometer sensor sa may hub?
Hindi po compatible
Paps same tayo ng panel pero raider j 115 gamet ko 4 speed lang... Hinde nagana ung fuel ko palaging full tank sa indicator inde kaya ayusen ng technician na nag install not sure baka may mali or not compatible lang sa panel... Any advice baka sakaling gumana 😁
Madali lang yon paps basta alam mo na kong ano ang wire sa fuel indicator ng gauge. Isa isahin mo itap sa stock wiring ng motor hanggang sa tumama yong indicator. Kong nahihirapan ka pwede mo ko imessage sa fb bka sakaling matulong kita.
@@FredMoto Copy paps... Salamat
@@neneenriquez6996 welcome paps. Rs
Kuys may gear indicator po ba yan na dashboard?
meron kuys may abang din na wire
boss kapag ba bumili ng digital speedo may kasama na sya senson??salamat
Yes boss kasama na po sensor.
@@FredMoto salamat boss ride safe
Kabli lang ho ba yung para sa reading speed nya po sir? Or naka wire type po. Ask lang ho sir.
Wire type na po sir.
Paps magandang umaga po tanong kulang po nung benile mo yong digital speedometer mai kasama ba sang wirings diagram
May kasama na po wiring diagram lang kaso lang mali mali po. May color ng wiring sa diagram na wala nman sa digital.
Salamat po paps
sir same lang ba wires ng pass light at high beam?
Yes same lang
@@FredMoto maraming salamat po
Paps pag ba laggy ang reading possible pangit ang pagkaka crimp? Pangit kasi ng crimping tool na nabili ko
Nice paps!! very helpful tips👆👍💪
new friend here..!! full support..
sana,,madalaw at matapik mo din po ang garahe ko...salamat🙏ride safe..
Thanks paps!
Sir Ask kolang nag installed kasi ako sa XRM110 pero tuwing namamatay nag rereset ang oras?
boss baka pwede magrequest kung paano icalibrate yun digital. diferent model siya e, unlike sayo, walang check engine yung model
Search mo paps baka meron din gumawa ng calibration kagaya ng model sayo.
Sir tanong ko lang kung saan mo nakuha yung mga settings ng speedometer mo? Pareho kasi tayo ng speedometer pero yung sa akin walang reading yung speedometer at hindi nagbabago yung oras ng clock
Yong speedometer mo sir nakakabit po ba yong sensor at magnet nyo? At sa clock nman po kaya naka direct sa battery yong ground at positive para hindi mareset yong settings.
Naka kabit po yung 2 magnet sa disc inilapit ko na din yung sensor baka nasa 2mm na lang yung gap nila at yung sa clock naman yung red wire sa battery naka connect pati yung green ang problema sa clock hindi nagbabago yung oras kung ano yung sinet ko hindi na sya gumagalaw
@@jerichoarceo349 hindi po kaya baliktad yong magnet? Yong sa clock mo paps tanggalin mo muna yong negative sa battery tapos kabit mo ulit then antayin mo po gumalaw yong clock pag wala parin ulitin nyo lang po.
Hindi naman po baligtad yung magnet..yung negative pag tinangggal ko mamamatay yung speedometer
@@jerichoarceo349 baka may sira na po paps yong sensor nyo. Ganon po pag namamatay mag rereset ulit yan tapos kabit mo ulit hanggang sa gumana na yong time.
paps request ... pano mag lagay gear indecator...
Sge paps pag balik sa dati nating pamumuhay. Rs.
Uploaded na boss request mo
Do I have to use the magnets and build the speed sensor or can I simply use the one already built in my bike?
Yes sir you need to use the sensor and magnets of digital gauge, If you use stock speedometer sensor of your bike you cannot calibrate to get the correct speed.
@@FredMoto
Sir bakit ung odometer ko di accurate ung reading parehas naman tayo ng code 1712 ung trip di nagpa function at ung timer nya hindi rin
@@FredMoto I hooked up the speedo wire to the black/white? on the 3 wire plug (mine uses a hall sensor) You might have to play around with the settings to get the correct speed, as I didn't want start drilling stuff just to mount magnets and extra wiring.
@@marcial6419 yon ang sakit nya sir, nag rereset po kasi sya once humihina ang power like pag gumamit ka ng starter.
boss isang malutong na like at subscribe ka sakin! maraming salmat sa tutorial mO!
Salamat paps, ang sarap gumawa ng content sa mga ganitong comment.
Boss salamat may natutunan ako.pero sir anong kulay na wire para sa rpm?
Paturo naman ganyan din kc binili ko dko makuha rpm kung aling wire.salamat
@@henniesalinel7030 connect mo lang sila sir greenw/ yelloe(digital) whitew/blue stock sz
@@FredMoto, sunod ko man wiring pattern mo, hindi man gumana rpm. Thanks papsz
sir what about from digital gauge to analog po? kaya po ba? maselan kasi sa ulan ung sakin (kawasaki
rouser 180)
Boss pwde sayo maka bili nyan Yung naka calibret na sana kasi na una ko bili hanggang 31 lang speed.
Nag rereset po ba yung time/clock niya after mo ma patay ang motor?
Oo,meron ako video paano iset para hindi sya mag reset
Thanks
Boss sana mapansin mo tong comment ko..pano po yung setings mo sa paglagay mo ng magnet tapatan ba or isa lng ginamit mong magnet
Isa lang na magnet nilagay ko boss.
Maraming salamat lods ...
Kailangan po ba na dalawa yung magnet na ilagay? Salamat po
Isa lang nilagay ko.
Sir, ano po ginawa niyo para maging accurate yung reading nung laman ng tanke? Diba po may sobra po iyon na wire? San niyo po nilagay?
At which part did you put for your cylinders? My motorcycle if 4 cylinders.
Good afternoon po paps ask kulang po bat kaya biglamg ng block out yung speedometer ko na ganyan po,?
Slamat po sa sagut lods,👍✌️✌️
Check mo paps wiring connection ng ground at sa ignition bka na disconnect lang po.
@@FredMoto sige po paps salamat po ng marame, god bless ridesafe always po
Boss bkt pag umandar na Yung motor Patay sindi Yung dashboard nya
Tachometer connection wiring color code in bike or how to connect tachometer connection
paano mo sir na figure out ung configuration ng speedometer? para saan ba ung C-1712? sa cbr250r speedo kc C-15010. ano po b un?
Sir tanong ko lng panu po b mapapagana ung fuel guage nyan para sa yamaha sz?..tnx po
Need mo mag palit ng fuel sensor paps.
👏👏
Any way to input tire size? What do the codes entered mean? code: 1Cc- 1712 (why?), code: 2c---01 (why/what?), 3c---4 (?), 4e---2 (??) code: 6---3 (3 cans of beer?)
Sir taga pasig ka lng pala sir paturo nmn ako paano magkabit NG gear indicators
Sge sir. Meron po tayo tutorial nyan.
What did you wire the gear wires into
Brother this connection diagrams is same for all universal meter? Me too have a sz I want to order one from aliexpress
No, it depends in every design/model that you will buy. This wiring is only for this specific digital meter,every design has different wiring and color coding but I guess my video will help as guide since digital meters has same number of wires and connections.
@@FredMoto So how to find the correct wires with that any helping diagrams will be there?
@@jyothismgeorge6013 there is a manual included in the package.
@@FredMoto h5.aliexpress.com/item/4000729809730.html
I like to get this model how is it please check it.
Its defferent brother, its universal so you can install it.
Boss anong bracket ginamit mo para pag kabitan nang digital??? Tnx
May nabibili paps sa motorcycle shop na bracket may mga butas ng din po yon mga 80pesos isa yong makapal.
@@FredMoto tnx boss..
Boss isang tanong pa, may idea kaba kung saan naka derekta ung wire ng rpm? Ung sa sz ko kase boss ayaw gumana ng rpm nya kahit sa stock na speedometer.. Alam mo ba kung saan o ano isira ng sensor non sa makin?
Sge sir unli tanong po. Naka connect ang rpm yong iba sa pulser minsan nman po sa igtionion coil. Kong hindi na po gumagana yong rpm nyo posible na nasunog na yong diode ng rpm dahil sa sobrang lakas ng power na pumapasok posible din na sira na ang rectifier dahil malakas na ang power na sinusupply nya sa rpm. (Para sa battery operated)
Boss nkita ko na po, sa cdi pala sya naka connect
Ang problema po pala palang kulang ung wire na pag kakabitan, sa stock po siba may isang black pa na nabakante, pang kinakabit ko ung lumang speedo gumagana nmn, pero pag hinugot ko ung black nawawala, ang problema po diko alam kung saan ikakabit umg black n un sa stoxk ppunta sa digital
Ok boss may wire din sila papuntang CDI.
Kong gagana nman sa digital boss kahit wala yong black disable mo nlng.
Hi,
I have installed this metter. Everything is fine but faving one issue.
My meter fuel gauge show full fuel or empty. It not showing between full nad empty.
Is there any issue in connections.
Plz guide.
Boss pwde po bag e set yung kulay nyan kasi pag on green sya lage pwde po ba gawing red pag on ng motor
ruclips.net/video/V2H0kZ6VtG4/видео.html
Paps .. isa lng bang magnetic sensor ang nilagay mo ?
Isa lang paps.
San ba ang connecksyon ng rpm wire sir..ano po kulay sa digital speedometer at san i tap
'saan k po s pasig sir, bka pwd po painstall ng sken... wla pong rpm and speedo ee
Ano po motor nyo sir?
Raiderj115fi
boss pwede kaya yan sa SZ-R 150?
Boss ano Maya problems shaken young gas gauge di nagana? Kailangan ba ilagay young sensor PRA gumana gun?
Connect mo lang sya boss pero kong nakuha mo na yong wire ng gas mo at na connect mo na sya(wait 30sec) kong wala baka sira na yong floater ng gas mo.