Air Push Connect Coupling Leak, Leaking Air Couplers - Easy Cheap Fix, Replace O-Ring

[@hishamalhasani689]

Thank you sir, You saved me some money, I replaced the seal and it worked fine.

[@AllHandsMechanic]

Awesome, good to know it helped you. It takes time and effort to publish these videos, please support the channel by clicking on subscribe button.

[@hishamalhasani689]

@@AllHandsMechanic ّ I did subscribe to your channel.

[@a29miller]

Thanks! Very helpful 😀

[@Bdoodee]

The rubber seal ring is supposed to be flat. If you use a round edged one it will make tool connection difficult. Solution.... Take a file and lightly flatten both making them as concentric as possible before reinstalling and it’ll make life easier. Alternatively you can just flip the old O-ring over and double its useful life. Cheers.

[@AllHandsMechanic]

Thanks, thats useful to know :).

[@Bdoodee]

You’re welcome!

[@candancealot]

These have O-rings? I haven't seen any yet. Mine have flat 19/32 washers. Hard to find. Found bib washers but bibs are so damn stiff.
I've got ten of these female chucks leaking. Do not want to buy more

[@andrewt902]

My particular couplings use a thick rubber ring. You can flip them to get a bit more life, but I've found 1/4L faucet washers work well. You have to ream the inner diameter out a bit, then lube with a little silicone spray and put the valve stem in.

[@PreachTheGospel07]

Thanks for sharing

[@AllHandsMechanic]

Thanks for watching!

[@gaspardujon7191]

nice video. Thank for the information

[@SmooveBee1]

You can buy the correct flat o-ring in most markets.

[@subashhembram8534]

Kitna mahanga hai

[@AllHandsMechanic]

Thanks for watching, It's for very affordable to replace it.