Thank you for the help! Just thought I'd let everyone know my situation for anyone with similar questions/issues as I had. My cruise control light would light up on the steering wheel, but it would not set. The brake lights all worked and there was no error code or check engine light, everything worked as normal other than my cruise control and parking assist. After swapping out this part my cruise control now engages and works perfectly, I think my parking assist even beeped at me while I was parking after the test drive, so it possibly fixed that too, we'll wait and see. Good luck everyone!
Thanks for posting the video. I had the same problem and got it fixed in about 20 minutes. I didn't have a bolt to remove. Just a fat guy trying to squeeze into a tight place.
I am a big guy so I was in every position trying to take that clip off. Eventually I saw this video and knew where to pry. At one point I was upside down on my seat so I can have good access under there. Took me about a hour 😂. 😢
Thank you! I'm glad i found this video and was able to do it myself. I'm jealous of how easy you made it seem to get that clip off. It took me longer than i care to admit...
Thank you!!! I could not figure out how to get the clip back on. Other videos talked about the clip but you are the only video I found that shows how to put it back on. Finished the job in 5 minutes. Life saver!!! My cruise control works perfect again and by reading other comments it seems this will also fix my stabilitrak issue.
I just did this and it was easy. Fixed both cruise control and service stabiltrack error. Trick to getting the clip off is to grab the top of the small rounded part on the outside of clip where bolt goes in and pull away and it will pop right off. No need to even use a screwdriver.
Lol just because its new body style doesnt mean its called 07.5 you hillbilly. They made these the same time as the other 07s they just called the other one 1500 classic
Thank you your video very useful. Watched others and you explained and showed how it’s done far better than the others. Sensor installed and all is working well. Thanks again
this just fixed my ABS STABILI TRACK lights , thanks for detailed video by the way it was rough trying to orientate the module and clip. one thing i noted was the bolt had lock tight on it as well but i didnt even need a wrench to back it out .... not sure what was up with that but thanks again
It's Christmas Day and I'll be looking forward to a stop at one of my local auto parts places tomorrow to get a new switch. Sooo very tired of my cruise control not working right. I did figure out that if I use my toe and pull the pedal toward me even though I don't feel any movement, I could get it to set. I'm tempted to take the switch off and pop it open to clean the switch contacts, but for the small price of a new one why bother. Thanks for your video.
I refuse to take my suburban to get this done. No 250.00 min to fix it. I will do it. I have been watching this video several times to just know well what to look for and do
Thank you ... however, i tried and replaced light switch. So I continued troubleshooting and found the reson of this issue . It was from defective steering Clock . Once i replace it by new one the cruise activated and work good
I'm wondering if this is also my issue, I went to the parts store hoping to get the AC Delco but they only had Standard. The swap went pretty quick and I was sure the switch was the issue due to the symptoms (tail lights but no brakes, and cruise won't engage) but no dice. Maybe I'll pull it tomorrow and try another or try testing the wiring.
Great Video! My silverado cruise control stopped working but did NOT put on the engine light or give a code. By replacing the old switch with a factory switch from a jungle themed online store, less that $20, the cruise control is up and running again. Thanks for the help @Idaman71044
Hey thanks for the video and help. Mine is a 2010 and did as you stated and it worked. However not at first. I took it for a drive to try it out and at first did not work , but stopped truck and pushed on wiring harness and tried it again and boom there she went ha ha. Thank you. Clip was an issue as mine was in slightly different locale on brake pedal. Had my wife go under dash and it just came off in her hand lol figured right. Thanks again.
BEWARE!!!!! READ THIS BEFORE YOU REPLACE THE SWITCH!!! Before you replace the switch you need to realize the Brake Lights won't work unless the truck is running. I spent an hour checking fuses, replacing the old switch, putting the new one back in and out three times. Nothing worked when I pressed the brake pedal. Then I decided to crank it up and the brake lights worked. I thought the brake lights would come on anytime you pressed the pedal. It did in every other car I owned but not this truck. So if you think you didn't do it right crank it up and try it then.
Opportunities in a8 o 8 u p88 l😂lk⁸o oil o o⁸88p8u8😢😢p 8SSB 77k88⁸o l8 li🎉8⁸8o8l8o87o888p😢pI 8l88😮77oo8p89pl😢😢⁸o88o8o7o⁸o[o7oooo😢70UM7370PU8pIA 8⁸8yI oo8p613.05 8o8o87🎉o8o😮888oo⁸o8o o I l8oo o 7 o[ooo8o8[I 8 I oo 8poo8yo 8o in 88po8 u⁸8ukk6uukao😂 0:06 7l88po87😢8p⁸p8887😢88p9pp88pk6i8😢
Just had to replace booster. Got brakes but now the brake lights stay on, replaced switch, still lights on. Position of brake pedal doesn’t matter as not a open/close switch. Any ideas, or brakes we’d bleed too.
Read before you purchase the switch. I purchase my switch and replaced it. Cruise now works. The kicker however is...the switch has two different contacts. One normally closed and one normally open. I tested the switch I removed and the contacts tested perfect. The existing grease on the other hand was dry, hard and sticky. The switch has to rotate on the metal pin on side brake pedal. The reason the brake lights still work is because you press the brake hard enough to actuate the switch in whatever position it might be in. So if the switch is stuck out of correct position then the contact for cruise control won’t work. My new switch came with instructions that said to thoroughly remove all grease from pin and add new grease. I used white lithium. So basically I believe the old switch was still good but the grease was not. I mean why would just one section of the switch fail?
Late to the channel, but were you experiencing any surging/pulsing of rpm's when you were able to get any cruise control engaged prior to replacing it?
So I bought the switch and when I go under to replace it, it had no bolt. It has the metal clip, which looks way different than all the ones on all the videos I have seen. I have a 2007 avalanche by the way.
I have p0573 on my 05 jeep liberty, this may be it, speedometer pegging all over from accurate down to 0mph, cruise won't work then, this may fix it, thx.
I just replaced mine today. Took it for a drive & still didn't work. I stopped turned the truck off & on again the light finally came off went for a drive & it worked. It was doing this before I changed it to the new one. Do you recommend to unplug the battery for it to reset or to also erase the code see if that helps?
Do I need that 10 mm bolt for it to work?? I lost mine on it and have the problem of my brake lights stays on all the time and cruise control doesn’t work and it throws me a code of service cruise control as well .
Hello. I switched mines out due to non working cruise control. It works now, but now I’m getting service stabilitrack service traction control on my dash. Any suggestions on how to fix that?
My cruise control still work just the brake light isn't working, new light bulb is on, will the new brake switch will work? Im a beginner at this mechanic thing
Ive got a 2007 suburban but, my switch looks totally different than this. Are there other versions of this switch? The switch I bought has 4 male plugs. The one on the car has 6 or 8 looks like. I don't want to take it apart if it doesn't work.
I just replaced it and whenever I went to drive it it wouldn’t let me shift into drive but when I unplugged it and left it unplugged completely it then it let me shift into drive can you help me or explain what happened or did wrong I got the exact part off of autozone the duralast brand
So I just replace my trucks brake light but it did not light up. Hopefully your method will do the job..could I purchase the brake switch at like an autozone store?
Ok. I have to ask. Year, make, model. I assume Chevy Silverado. If it is the same year range as mine, I found out that the brake lights dont come on unless the ignition key is in the on position. Typically people replace bulbs with it off. So let me know if this helps.
Joseph Montoya my chevy 2005 silverado has the same problem but to the point that if i push the brake light switch upwards they work until it wiggles back down and they stop working all together unless i press the brake pedal all the way
Hey ldaman. I just put a new brake pedal switch in my 07 Silverado. Went to clear the code(none showed up), but started truck after and my dash light came on. Thought maybe my emergency brake got pushed down but it wasn’t. What do you think it could be? I’m going to check it out again In the morning. This is a first for me. Not sure what’s going on.
Just replaced it on my 2011,cruise works,easy fix,pry clip out with thin screwdriver with a little force,clip goes back on with upward force and your thumb,took me 10 min.Truck even runs better.Like my trailer brakes were sticking the whole time.
Jamie Clay my brake lights were working. Just no cruise control. A bad brake light switch can cause many different symptoms. Including no brake lights.
Sadly this didn't solve my cruise control problem. I don't know if it can be related but my alternator just crapped out, too. Hummm thanks anyway - it was a cheap and easy replacement so at least there is that. :)
@Idaman71044 i just did this, only thing is my truck won't start and the needles on the guages keep ticking as if it's trying to reprogram or something. I tried jump atarting the battery, but it still doesn't work. Any advice? I don't have a computer to read what the problem might be.
I'm guessing it wasn't doing this before? If not swap the old part back in and recheck it. If it starts and runs normally with the old part back in, sounds like a bad new part.
@@idaman71044 it was the battery lol idk why but as soon as i unplugged the break switch and switched it with the new one, the battery died (it was already old). So got a new one and everything is how it should be lol thanks for the help!
It very well could yes. I also found out that the brake lights wont work on my truck unless the ignition is turned on. Not sure if this is what you may be experiencing. I still haven't been able to confirm if that Is normal or not
Tim C I would think so. If the shift lock doesn't see an input from the brake light switch, it won't release the shift lock to take out of park. This is definitely the case with the Subarus and Lexus models I mostly work on. I replace about 1 switch a week with subaru. Especially in the summer.
For you people that are struggling with the clip. I had the same issue and found a separate video which deal strictly with removing the clip. After watching the video I had it off within seconds. ruclips.net/video/iv2D_nm8Jck/видео.html
Because every now am then the cruise will work but most of the time it will not and the light on the switch is on so I know the switch on the steering wheel is good
@@garrettcarman9358 more than likely, yes. My check engine light was already on for my catalytic converter. There was also a code for the brake light switch. I also had intermittent cruise control until it just entirely went out.
Chris Murrill so the cruise control light on the steering wheel doesn't light up? That sounds like it could be a bad switch. I would first check that the fuse is good then then check if the switch is getting power and ground.
No problem. If the light on the steering wheel comes on, but the cruise won't set, I would highly suspect the brake light switch. I had a code for my light switch circuit. The brake light switches are a common problem on these trucks.
Thank you for the help! Just thought I'd let everyone know my situation for anyone with similar questions/issues as I had. My cruise control light would light up on the steering wheel, but it would not set. The brake lights all worked and there was no error code or check engine light, everything worked as normal other than my cruise control and parking assist. After swapping out this part my cruise control now engages and works perfectly, I think my parking assist even beeped at me while I was parking after the test drive, so it possibly fixed that too, we'll wait and see. Good luck everyone!
Thanks bro, you're the only video that showed how to properly put back the switch. I was putting that metal piece in first then the switch itself
Thanks for posting the video. I had the same problem and got it fixed in about 20 minutes. I didn't have a bolt to remove. Just a fat guy trying to squeeze into a tight place.
and 3 years later this video still proves useful thanks man
same issues...$25 and 15 minutes later cruise control back up and working on my 2008 Escalade! thanks for the info
I hate how easy you made this seem. I've been fighting with that damn clip for 30 minutes.
Andrew Dunkle yup that was me 😂😂
It is not a contest but I am 3+ hours now on a stupid @#$**$*/ clip.
I hear ya ..glad im finally done lol
I am a big guy so I was in every position trying to take that clip off. Eventually I saw this video and knew where to pry. At one point I was upside down on my seat so I can have good access under there. Took me about a hour 😂. 😢
@@TheMisterBigg all of the above....then some. 🤯🤯 I ate a salad for dinner!
Thank you! I'm glad i found this video and was able to do it myself. I'm jealous of how easy you made it seem to get that clip off. It took me longer than i care to admit...
maybe because you didn't notice that he put that clip i the wrong way , oppose to the way it was installed before he removed.
Thank you!!! I could not figure out how to get the clip back on. Other videos talked about the clip but you are the only video I found that shows how to put it back on. Finished the job in 5 minutes. Life saver!!! My cruise control works perfect again and by reading other comments it seems this will also fix my stabilitrak issue.
I just did this and it was easy. Fixed both cruise control and service stabiltrack error. Trick to getting the clip off is to grab the top of the small rounded part on the outside of clip where bolt goes in and pull away and it will pop right off. No need to even use a screwdriver.
Scott Slankard appreciate that cause that was the hardest part lol
Thanks for the vid. Took me 15 mins. now cruise is working as it should.
Awesome. Was suprised found a vid with my exact 07.5 so this is very helpful
Lol just because its new body style doesnt mean its called 07.5 you hillbilly. They made these the same time as the other 07s they just called the other one 1500 classic
Thank you, I just switched mine out and it now works like a charm!
Thank you for taking time to do this. I work on my own stuff so videos like this help me know what to do.
Thank you your video very useful. Watched others and you explained and showed how it’s done far better than the others. Sensor installed and all is working well. Thanks again
Thanks for sharing this. Huge help and cruise is working again.
Thanks man! You're video saved me... That bloody clip.. I couldn't figure it out until I saw your video.. Thanks again.
this just fixed my ABS STABILI TRACK lights , thanks for detailed video by the way it was rough trying to orientate the module and clip. one thing i noted was the bolt had lock tight on it as well but i didnt even need a wrench to back it out .... not sure what was up with that but thanks again
ready toosnap no problem. Thanks for watching.
Stability track break light fixed?
Thank you for the video. It helped me here in Calgary.
Thank you cruise is working properly now. It was hard doing with fat fingers to get that clip off lol.
I'm a big guy. Hard part was being under there trying to do the whole process. At one point I was upside down on seat so I can have better access 😂
Thank you I just fix my truck watching your video
Thank you!!!! Wrote down the part number ordered it on Amazon for about $12 and got it installed in about 15 min
Thanks Bro helped me fix my Yukon Denali cruise/Stabilitrac/ Traction control dash messages 🍻🏁🏆🌟🔧
Did it show abs and stability track light?
Mines has ABS, traction control, stabilitrak, trailer brake system lights on as well. Hope this fixes it
Thank You I did everything you shown. I bought that part from Amazon works great.
Worked like a charm man preciate the video
It's Christmas Day and I'll be looking forward to a stop at one of my local auto parts places tomorrow to get a new switch. Sooo very tired of my cruise control not working right. I did figure out that if I use my toe and pull the pedal toward me even though I don't feel any movement, I could get it to set. I'm tempted to take the switch off and pop it open to clean the switch contacts, but for the small price of a new one why bother. Thanks for your video.
Thanks for watching.
I refuse to take my suburban to get this done. No 250.00 min to fix it. I will do it. I have been watching this video several times to just know well what to look for and do
OMG, that clip!!! Why do GM engineers hate us? A frickin’ cotter pin would be better.
Thank you ... however, i tried and replaced light switch. So I continued troubleshooting and found the reson of this issue . It was from defective steering Clock . Once i replace it by new one the cruise activated and work good
Steering clock?
Yes it can also be the clock spring in the steering wheel
I've had to do this replacement twice. My suggestion, use the AC Delco replacement part not the Doorman.
I'm wondering if this is also my issue, I went to the parts store hoping to get the AC Delco but they only had Standard. The swap went pretty quick and I was sure the switch was the issue due to the symptoms (tail lights but no brakes, and cruise won't engage) but no dice. Maybe I'll pull it tomorrow and try another or try testing the wiring.
Got it done today! Thanks for the vid!
Great Video! My silverado cruise control stopped working but did NOT put on the engine light or give a code. By replacing the old switch with a factory switch from a jungle themed online store, less that $20, the cruise control is up and running again. Thanks for the help @Idaman71044
Hey thanks for the video and help. Mine is a 2010 and did as you stated and it worked. However not at first. I took it for a drive to try it out and at first did not work , but stopped truck and pushed on wiring harness and tried it again and boom there she went ha ha. Thank you. Clip was an issue as mine was in slightly different locale on brake pedal. Had my wife go under dash and it just came off in her hand lol figured right. Thanks again.
BEWARE!!!!!
READ THIS BEFORE YOU REPLACE THE SWITCH!!!
Before you replace the switch you need to realize the Brake Lights won't work unless the truck is running. I spent an hour checking fuses, replacing the old switch, putting the new one back in and out three times.
Nothing worked when I pressed the brake pedal.
Then I decided to crank it up and the brake lights worked.
I thought the brake lights would come on anytime you pressed the pedal.
It did in every other car I owned but not this truck.
So if you think you didn't do it right crank it up and try it then.
Thank you took me 5 min,cruise works,truck even runs better.Clips piece of cake,thin screwdriver.
A!!we 😅!!!!aa!a!!!a😮!!a! 😊aa😮I! Awesome 😅😊! Awesome a😮a😢😮aa😮a😮😊a😮oa😮😢 0:06 😢from! 🎉 0:06 8aa🎉😢😮!😊😮aa
Opportunities in a8 o 8 u p88 l😂lk⁸o oil o o⁸88p8u8😢😢p 8SSB 77k88⁸o l8 li🎉8⁸8o8l8o87o888p😢pI 8l88😮77oo8p89pl😢😢⁸o88o8o7o⁸o[o7oooo😢70UM7370PU8pIA 8⁸8yI oo8p613.05 8o8o87🎉o8o😮888oo⁸o8o o I l8oo o 7 o[ooo8o8[I 8 I oo 8poo8yo 8o in 88po8 u⁸8ukk6uukao😂 0:06 7l88po87😢8p⁸p8887😢88p9pp88pk6i8😢
Just did mine... easy peasy
Just had to replace booster. Got brakes but now the brake lights stay on, replaced switch, still lights on. Position of brake pedal doesn’t matter as not a open/close switch. Any ideas, or brakes we’d bleed too.
Thank u so much. Pin was hard but got it
Great video
DAM YOU MAKE IT LOOK EASY !!!!
I used 2 flathead screwdrivers at once to get the clip off. One to pry a little the other to push up and it popped right off.
thank you very much, followed your instructions, hit the local auto parts and BINGO. Cruise back on!
Thank you! Took me 7 minutes to fix.
Read before you purchase the switch. I purchase my switch and replaced it. Cruise now works. The kicker however is...the switch has two different contacts. One normally closed and one normally open. I tested the switch I removed and the contacts tested perfect. The existing grease on the other hand was dry, hard and sticky. The switch has to rotate on the metal pin on side brake pedal. The reason the brake lights still work is because you press the brake hard enough to actuate the switch in whatever position it might be in. So if the switch is stuck out of correct position then the contact for cruise control won’t work.
My new switch came with instructions that said to thoroughly remove all grease from pin and add new grease. I used white lithium.
So basically I believe the old switch was still good but the grease was not. I mean why would just one section of the switch fail?
Late to the channel, but were you experiencing any surging/pulsing of rpm's when you were able to get any cruise control engaged prior to replacing it?
Thanks,You made this understandably easy,!!!
You're welcome. Thanks for watching
Excellent!!
Good video thank you
Does the green stuff need to still be on the screw or am I screwed?
Didn't do it for me! Other ideas for the same problem?
So I bought the switch and when I go under to replace it, it had no bolt. It has the metal clip, which looks way different than all the ones on all the videos I have seen. I have a 2007 avalanche by the way.
I had the same issue.
I have p0573 on my 05 jeep liberty, this may be it, speedometer pegging all over from accurate down to 0mph, cruise won't work then, this may fix it, thx.
I don’t have a code and my cruise still works but when I push the brakes no lights
What if I have a white switch instead and just a stud and no harness to plug into the brake light switch. I posted a video on my channel
Are those amp wires actually routed right behind the brake pedal?
I just replaced mine today. Took it for a drive & still didn't work. I stopped turned the truck off & on again the light finally came off went for a drive & it worked. It was doing this before I changed it to the new one. Do you recommend to unplug the battery for it to reset or to also erase the code see if that helps?
Thanks man my clip flung off an didn't member how it went
Does this cause your lights to stay on permently
May be a dumb question but will you get a check engine light with this. My cruise is out and everything is the same problems wise. Thinking this is it
No check engine light for this code.
Just replaced mine and it now it works randomly. Any idea why it would only work sometime
I’ll ready change that switch and still not working, any advise on that?
Do I need that 10 mm bolt for it to work?? I lost mine on it and have the problem of my brake lights stays on all the time and cruise control doesn’t work and it throws me a code of service cruise control as well .
I appreciate you
Thank You!
Thanks dude
Hello. I switched mines out due to non working cruise control. It works now, but now I’m getting service stabilitrack service traction control on my dash. Any suggestions on how to fix that?
You would have to get the codes pulled for that system to start a diagnosis
My cruise control still work just the brake light isn't working, new light bulb is on, will the new brake switch will work? Im a beginner at this mechanic thing
Gracias por el video
Not only did my cruise go out. I had to pump the brakes to get it out of park on the daily
Yikes!
I have the same problem on a 2012 I changed the switch break lights still stuck on
Ive got a 2007 suburban but, my switch looks totally different than this. Are there other versions of this switch? The switch I bought has 4 male plugs. The one on the car has 6 or 8 looks like. I don't want to take it apart if it doesn't work.
Will that make your brake light come on
Thank you.
I just replaced it and whenever I went to drive it it wouldn’t let me shift into drive but when I unplugged it and left it unplugged completely it then it let me shift into drive can you help me or explain what happened or did wrong I got the exact part off of autozone the duralast brand
Change it and it still didn’t work what else could it be?
So I just replace my trucks brake light but it did not light up. Hopefully your method will do the job..could I purchase the brake switch at like an autozone store?
Ok. I have to ask. Year, make, model. I assume Chevy Silverado. If it is the same year range as mine, I found out that the brake lights dont come on unless the ignition key is in the on position. Typically people replace bulbs with it off. So let me know if this helps.
Yeah I replace it while my truck is off the brake lights wont flash while stepping on the brake pads, if that make sense. Its 2005 chevy Colorado
Joseph Montoya my chevy 2005 silverado has the same problem but to the point that if i push the brake light switch upwards they work until it wiggles back down and they stop working all together unless i press the brake pedal all the way
Hey ldaman. I just put a new brake pedal switch in my 07 Silverado. Went to clear the code(none showed up), but started truck after and my dash light came on. Thought maybe my emergency brake got pushed down but it wasn’t. What do you think it could be? I’m going to check it out again In the morning. This is a first for me. Not sure what’s going on.
Brake warning light is on and no codes show while running? Check brake fluid level. Let me know what you figure out
My 2011 Silverado cruise control comes on when it wants to
Just replaced it on my 2011,cruise works,easy fix,pry clip out with thin screwdriver with a little force,clip goes back on with upward force and your thumb,took me 10 min.Truck even runs better.Like my trailer brakes were sticking the whole time.
Will this work for a 2008 Chevy silverado
I've a similar issue with my Uplander but the brake lights work - is that relevant? I mean in this repair were the brake lights not working?
Jamie Clay my brake lights were working. Just no cruise control. A bad brake light switch can cause many different symptoms. Including no brake lights.
Gotcha - got one coming. It would be nice if it resolves the problem - I'll let you know! Thank you for this video!
Sadly this didn't solve my cruise control problem. I don't know if it can be related but my alternator just crapped out, too. Hummm thanks anyway - it was a cheap and easy replacement so at least there is that. :)
Jamie Clay that sucks that it didn't fix it. Can you let me know what it was when you do get it fixed?
@Idaman71044 i just did this, only thing is my truck won't start and the needles on the guages keep ticking as if it's trying to reprogram or something. I tried jump atarting the battery, but it still doesn't work. Any advice? I don't have a computer to read what the problem might be.
I'm guessing it wasn't doing this before? If not swap the old part back in and recheck it. If it starts and runs normally with the old part back in, sounds like a bad new part.
@@idaman71044 it was the battery lol idk why but as soon as i unplugged the break switch and switched it with the new one, the battery died (it was already old). So got a new one and everything is how it should be lol thanks for the help!
@@3hdee no problem. Thanks for watching.
Will the cruise control work if you change out the switch but don't clear the code??
That's what happened in my case. I replaced the switch and cruise worked. The light was still on due to catalytic converter code.
Thanks for the video but couldn’t see how u took the par off
Pull the shaft out of the brake pedal arm; the switch will come right off.
Would replacing this switch also fix my brake lights not working?
It very well could yes. I also found out that the brake lights wont work on my truck unless the ignition is turned on. Not sure if this is what you may be experiencing. I still haven't been able to confirm if that Is normal or not
Yes it should
I have that same problem... Intermittently
thank you useful vedio
Will this also fix my issue of my 2008 Silverado not shifting out of park?
Tim C I would think so. If the shift lock doesn't see an input from the brake light switch, it won't release the shift lock to take out of park. This is definitely the case with the Subarus and Lexus models I mostly work on. I replace about 1 switch a week with subaru. Especially in the summer.
Idaman71044 thank you. I'll give it a shot.
my cruise switch was bad so i replaced it,, still no cruise, if it is the break light switch, will your break lights still work because mine do ?
live free my brake lights still worked even with the bad brake light switch
My 08 Silverado doesn't have cruise control, would this still fix the light
It very well might. Make sure to check the fuse for the brake lights too.
Okay I'm getting it checked tomorrow thank you!!
Thanks a lot👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍😉😉😉😉😉😉😉😉
I switched it but the service the stabilitytrack and control service is still on and the truck is shaking and the braking has become more sensetive
that sounds like a different issue. any trouble codes?
Idaman71044 code: p0451,p0301, and p0463.
Mi truck stop light not work could you help please
I already change the brake switch but it does not work I have to delete some code
I switched out the Brake switch and the cruise still isn't working. Any one have an idea of what else it could be?
What's the part number?
Mine isn’t working but I’m not getting a code 🤷♂️
Thanks
For you people that are struggling with the clip. I had the same issue and found a separate video which deal strictly with removing the clip. After watching the video I had it off within seconds. ruclips.net/video/iv2D_nm8Jck/видео.html
Will replacing that switch on a 2011 fix my problem as well?
Because every now am then the cruise will work but most of the time it will not and the light on the switch is on so I know the switch on the steering wheel is good
@@garrettcarman9358 more than likely, yes. My check engine light was already on for my catalytic converter. There was also a code for the brake light switch. I also had intermittent cruise control until it just entirely went out.
Success 08 Sikverado LT
Lol I lost the clip it pop out and lost it, had to order another one from the Dealer
What if the cruise doesn't set but there is no light?
Chris Murrill so the cruise control light on the steering wheel doesn't light up? That sounds like it could be a bad switch. I would first check that the fuse is good then then check if the switch is getting power and ground.
I thought you had a dash light on for the cruise control switch. My bad. But the cruise control light on the wheel does come on.
No problem. If the light on the steering wheel comes on, but the cruise won't set, I would highly suspect the brake light switch. I had a code for my light switch circuit. The brake light switches are a common problem on these trucks.
I'll replace it tomorrow and we will see how it goes. Thanks bud!
No problem. Good luck.