hello kim,,i am totok from indonesia.we have a lot of coconut shell ingredients. we will also start the process of making smokeless coconut shell charcoal, and can produce liquid smoke. liquid smoke from coconut shells can be used for insect repellent plants, and can be refined again into a healthy food preservative. greetings from Indonesia
Hello Kim, I'm Ahmad from Indonesia. This is extremely impressive. I am quite interested in this device. But I want to ask a few questions on the effects of coconut shell burning 1. Is it feasible to char coconut shells with this equipment in larger volumes/quantities, or is there a limit? 2. What proportion of the residual water content in the coconut shell charcoal? 3. What proportion of substance levels is lost during the combustion process? 4. What proportion of ash content is produced? Thanks...
very impressive energy saving device Mr Kim. do you think we could skip the wood gas purification , as it is quite complicated for an amateur, and use LPG gas exclusively for the heating , though this might prove expensive , . i really like it. Anand from Mauritius
Hi Anand, thanks for your comment, we can seal smoke in the water( can also be smokeless working), but can't use the flammable gas from recycling. Because wood gas comes out from carbonization always with humidity and dust, that's why we use water purification, after purification, the gas will be very easy to light up and burn for heating. For one batch by one batch type furnace, "burn smoke directly" type can't work well( we have designed using gas ignition burner to help light up initial smoke, for rotary continuous working model, this will only need burn gas to help light up fire for smoke as start, later the fire will be powerful enough to burn the following flammable gas. Here's the model link: ruclips.net/video/SvV6RE1GrzI/видео.html). You can check for reference. Hope my reply helps you.
@@EduardoZal Hello, we are machines manufacturer. So we are selling machines. I’m afraid I’m not able to share more detail s. But video already very clear descriptions.
@@elviranelson1138 This is small volume furnace. Carbonization finish in only 3-4 hours. Time based on materials amount and carbonation furnace design ( fast pyrolysis or slow pyrolysis).
@@kimzhao-charcoalmakingmachine thanks for replying, in this video what is the max temperature reached when flameable biogas produced to burn the retort? I want to know the flameable gas capability after condensation. Since it is not blue flame
@@GoodMoment88 Hi, the recycled gas color will turned to be a process, firstly red, then blue, then yellow, then red, after these, it means carbonization finished
It’s only needed for preheating. Each model furnace able using recycled gas for heating. So different furnace is different data. And not whole 1 ton charcoal all count on LPG.
Hi This is just for testing scale. Not for selling. If you interested in to get one. Pls contact me on WhatsApp: +86-13949068666. I will send you details and price
وقت الكربنة على أساس كمية المواد. لأننا في هذا الفيديو نقوم بإدخال كمية قليلة جدًا من قشرة جوز الهند، لذلك تنتهي في عدة ساعات. إنها ليست مجرد عدة دقائق تنتهي كوقت فيديو.
لا ليس كذلك . اذا كانت الكمية قليلة او كثيرة لا يؤثر على وقت التفحم او الكربنة . لان انا ايضا عندي ماكنة او فرن الكربنة يتسع لواحد طن ونصف من قشور الجوز ويحتاج الى ثمانية ساعات متواصلة لكي يتفحم .
قشرة الجوز أصغر بكثير من قشرة جوز الهند، وتحتاج إلى 8 ساعات بسبب تدفق الهواء السيئ بالداخل. لذلك يحتاجون إلى وقت أطول بكثير لإنهاء عملية الكربنة. الفرن المصمم الجديد في مصنعنا مزود بنظام تنقية كامل، ويمكنه جلب كل الدخان لتنقيته، وكذلك تعزيز عملية الكربنة. بدون تدفق الهواء، ستستغرق عملية الكربنة وقتًا أطول بكثير حتى تنتهي، ولا تزال غير قادرة على التأكد من التفحم بالكامل. لذا أقترح عليك استخدام تصميمنا، بدلاً من استخدام تصميم سيء، ثم احكم علينا. شكرًا لاهتمامك!@@Husham_Alameen
Walnut shell is much smaller size than our coconut shell, you need 8 hours because bad airflow inside. So they need much longer time to finish carbonization. New designed furnace in our factory all with complete purification system, it can bring all smoke to purify, and also promote carbonization process. Without airflow, carbonization will takes much much longer time to finish, and still not able to make sure fully carbonized. So suggest you use our design, instead of using a bad design then judge us.Thanks for your interest!@@Husham_Alameen
Hi nice to meet you! This is testing scale, so not for selling. We have bigger models for producing charcoal, if you interested check these link: ruclips.net/video/f3Aw1nsOxaY/видео.html ruclips.net/video/5Pgv9bpTyt8/видео.html ruclips.net/video/Old1BYOro1k/видео.html
@@kimzhao-charcoalmakingmachine Please send me quotation for the smallest carbonizing kiln you have with same technology to: rochana5656@gmail.com Please also send pictures & video links soonest possible.
Because we test in our factory, not allowed to make any smoke. You can use any other Wasted firewood to preheat up furnace. This is only showing principle how does our system working. Our normal model for sell is using recycled gas as main heating fuel from materials carbonization itself. No matter what kind of charcoal making method, it will needs a preheating fuel at least!!! ruclips.net/video/H-VG15pRFk4/видео.html
hello kim,,i am totok from indonesia.we have a lot of coconut shell ingredients. we will also start the process of making smokeless coconut shell charcoal, and can produce liquid smoke. liquid smoke from coconut shells can be used for insect repellent plants, and can be refined again into a healthy food preservative. greetings from Indonesia
Pean bumi reog sebelah endi lhoooo dhe....#tak gawekno ae podoh ngono kui piye 😊😊😊
@@platnchannel2391 No Wa Sampeyan piro Pak ?
Hi Totok, good day! let's discuss on whatsapp: +86-13949068666
Hello Kim, I'm Ahmad from Indonesia.
This is extremely impressive. I am quite interested in this device. But I want to ask a few questions on the effects of coconut shell burning
1. Is it feasible to char coconut shells with this equipment in larger volumes/quantities, or is there a limit?
2. What proportion of the residual water content in the coconut shell charcoal?
3. What proportion of substance levels is lost during the combustion process?
4. What proportion of ash content is produced?
Thanks...
very impressive energy saving device Mr Kim. do you think we could skip the wood gas purification , as it is quite complicated for an amateur, and use LPG gas exclusively for the heating , though this might prove expensive , . i really like it. Anand from Mauritius
Hi Anand, thanks for your comment, we can seal smoke in the water( can also be smokeless working), but can't use the flammable gas from recycling. Because wood gas comes out from carbonization always with humidity and dust, that's why we use water purification, after purification, the gas will be very easy to light up and burn for heating. For one batch by one batch type furnace, "burn smoke directly" type can't work well( we have designed using gas ignition burner to help light up initial smoke, for rotary continuous working model, this will only need burn gas to help light up fire for smoke as start, later the fire will be powerful enough to burn the following flammable gas. Here's the model link: ruclips.net/video/SvV6RE1GrzI/видео.html). You can check for reference. Hope my reply helps you.
เป็นสิ่งที่น่าเรียนรู้มาก อยากถาม ครับ
1.ท่อแก๊สจากไม้มาแบบไหน
2.คำนวญจำนวนรูแบยได้บ้างหนอครับ
Aah...balang cengcot siah...teu ngarti krual-kruel aksarana. bangsa maneh mah pang egoisna, tara make bahasa ingrris. hayangna make bahasa sia wae.
Hello, I liked your design. Could you share plans and description of the design. I am writing to you from the state of Chipas, Mexico. thank you 🙏
@@EduardoZal Hello, we are machines manufacturer. So we are selling machines. I’m afraid I’m not able to share more detail s. But video already very clear descriptions.
good model may i know how tar is extracted
What is the role of all capacitors, meaning and blacksmith treatment?
Hi
,how long does the carbonization process take to achieve this result with your machine?
@@elviranelson1138 This is small volume furnace. Carbonization finish in only 3-4 hours. Time based on materials amount and carbonation furnace design ( fast pyrolysis or slow pyrolysis).
@@kimzhao-charcoalmakingmachine OK
Thanks you 🙏🏾
哈哈 第一次见 椰壳木炭
How does smoke pass through water?
It doesnt the gas materials and debris get trapped
Funny technology!
ดีจริงๆ
Can we talk about building one of these testing units for a biomass composition prototyping plant here in Brazil?
Contact me at whatsapp:
+8613949068666
I'm online now
@@kimzhao-charcoalmakingmachine تمام هلان وسهلان
What is the max temperature in celcius after flameable gas produce to heat the retort?
Hi this is testing model. Our normal furnace able to work at 400-500 centigrade
@@kimzhao-charcoalmakingmachine thanks for replying, in this video what is the max temperature reached when flameable biogas produced to burn the retort? I want to know the flameable gas capability after condensation. Since it is not blue flame
@@GoodMoment88 Hi, the recycled gas color will turned to be a process, firstly red, then blue, then yellow, then red, after these, it means carbonization finished
@@GoodMoment88 From 280 centigrade, there will start coming out flammable gas, then keep raising, till 400-500, then finish carbonization
@HENDRICK WU88 GOOD MOMENT And it's not whole blue, The center of the flame is blue, tip of flame always not blue😁
It use Scrubber Purification System ?
Hi friend, this one is using cool water spraying and condensation system.
What happens to the smoke? Does it pass through the water?
Hi Dear Gabriel. Yes. We use a designed water purification system to seal and recycling the smoke to flammable gas.
@@kimzhao-charcoalmakingmachine okay am interesting...would like to know how water purifucation works and being purified
Why you didn't show the weight of the bag before and after
Thanks for your advice. 👌I will send a Supplementary video later and keep you informed. Have a nice day!🤟
What's the yield percent of the charcoal from the shell
30% - 35% average my friend
Where does the smoke go?
Hi Mr Mohamed, we use designed water purification system to treat the smoke. So the whole process is smokeless working.
How many tons of lpg do you need to produce 1 ton coconut shell charcoal?
It’s only needed for preheating. Each model furnace able using recycled gas for heating. So different furnace is different data. And not whole 1 ton charcoal all count on LPG.
@@kimzhao-charcoalmakingmachine thanks for your reply kim. I will contact with you within this week
How much price?
Hi This is just for testing scale. Not for selling. If you interested in to get one. Pls contact me on WhatsApp: +86-13949068666. I will send you details and price
نموذك جيد كيف يتم استخراج القطران
How much is it?
Hi this is testing model. We have normal model for sell. It’s diameter 1.5m and length 3m. Let’s discuss on WhatsApp: +86-13949068666
كم السعر
يرجى الاتصال بكيم من Whatsapp: + 86-13949068666
هناك خدعة في هذا الفديو
قشور جوز الهند يحتاج الى 5 ساعات على الاقل ليتفحم في هذا الفرن الضعيف
وقت الكربنة على أساس كمية المواد. لأننا في هذا الفيديو نقوم بإدخال كمية قليلة جدًا من قشرة جوز الهند، لذلك تنتهي في عدة ساعات. إنها ليست مجرد عدة دقائق تنتهي كوقت فيديو.
لا ليس كذلك . اذا كانت الكمية قليلة او كثيرة لا يؤثر على وقت التفحم او الكربنة . لان انا ايضا عندي ماكنة او فرن الكربنة يتسع لواحد طن ونصف من قشور الجوز ويحتاج الى ثمانية ساعات متواصلة لكي يتفحم .
قشرة الجوز أصغر بكثير من قشرة جوز الهند، وتحتاج إلى 8 ساعات بسبب تدفق الهواء السيئ بالداخل. لذلك يحتاجون إلى وقت أطول بكثير لإنهاء عملية الكربنة.
الفرن المصمم الجديد في مصنعنا مزود بنظام تنقية كامل، ويمكنه جلب كل الدخان لتنقيته، وكذلك تعزيز عملية الكربنة. بدون تدفق الهواء، ستستغرق عملية الكربنة وقتًا أطول بكثير حتى تنتهي، ولا تزال غير قادرة على التأكد من التفحم بالكامل.
لذا أقترح عليك استخدام تصميمنا، بدلاً من استخدام تصميم سيء، ثم احكم علينا. شكرًا لاهتمامك!@@Husham_Alameen
Walnut shell is much smaller size than our coconut shell, you need 8 hours because bad airflow inside. So they need much longer time to finish carbonization.
New designed furnace in our factory all with complete purification system, it can bring all smoke to purify, and also promote carbonization process. Without airflow, carbonization will takes much much longer time to finish, and still not able to make sure fully carbonized.
So suggest you use our design, instead of using a bad design then judge us.Thanks for your interest!@@Husham_Alameen
Dijain pliss.
Woter sistim
🙏
How much in Indian rupees
Hi nice to meet you! This is testing scale, so not for selling. We have bigger models for producing charcoal, if you interested check these link: ruclips.net/video/f3Aw1nsOxaY/видео.html ruclips.net/video/5Pgv9bpTyt8/видео.html ruclips.net/video/Old1BYOro1k/видео.html
@@kimzhao-charcoalmakingmachine Please send me quotation for the smallest carbonizing kiln you have with same technology to: rochana5656@gmail.com
Please also send pictures & video links soonest possible.
Xie Xie ni kim Xie Xie Hao
😁❤️👍
Is this machine you selling?
This is for testing. Our normal model is bigger.
英语说得也太差了
抱歉，本人就是这个水平，我的视频只给想看的人看，抱歉给你带来不好的体验，诚挚的给你道歉，请你以后不用再看我的视频。祝您全家生活愉快！
pointless using LPG to make char!!
Because we test in our factory, not allowed to make any smoke. You can use any other Wasted firewood to preheat up furnace. This is only showing principle how does our system working. Our normal model for sell is using recycled gas as main heating fuel from materials carbonization itself. No matter what kind of charcoal making method, it will needs a preheating fuel at least!!!
ruclips.net/video/H-VG15pRFk4/видео.html
Why water cool the smoke?
Because to remove extra steam after spraying