Good video, on the warning tips. A bit shallow but hits the main points. Thanks and next time dont be shy to talk and roll them selves in the video its hard work but everyone would appreciate it and it will be shown on the thumbs up! Anyway appreciate your time and effort on this it takes alot of work to do it!!!!!
Thank you, I completed the upgrade to a 6WB last week, I did notice the range was not the same after the swap and coding, the 6WA showed 392km the 6WB displays 456km, not sure if this is something to be concerned about.
Hello, I want to change my standard cluster from miles to a standard cluster in km. After reprogramming and reflashing the new standard km cluster to match the original millage/km on the car, do you have to programme the car's ecu to accept the new km cluster ?
Hello, I see that you got an error at 6:47 RDBI_FTP and RDBI_SVK at 7:00 I'm getting the same errors trying to retrofit 6WB, after that cluster went blank not responding. How did you come across that error? Thanks
Hi. How much you will charge for programming the 6WB in F32? I can do the coding myself but since you can actually do the programming means that if my dealer wants to to a software upgrade I do not need to reconnect the old clusters right?
Hi we tried to calibrate HUD BMW F10 It says choose shape Rombus,Trapez etc we choose and then try to fine tune like 1 is up 2 is down etc but it doesent change at all please help
I've recently had 6WB retrofitted to my F30 but when i code to code for the M. Performance cluster logo to appear i get M550d show up instead. Is there a way to recode this to show M Performance...?
i got the 6wb installed in my f30,was preprogrammed for my car by vin#,but it isnt working properly,will switch screen lay out and color in the different modes(blue ecopro,black comfort,red for sport and sport+) but my rpms,hud,gas gage,nav in cluster dont work. the guy from germany said my car needed to be reset-is this something i can do in beemercode or do i have to drop a mint at local dealership? ive tried to update thru usb stick from download at bmw website,car dosnt recognize it. any help would be most appriciated
I’m Same guy as post above,I’ve tried figuring out how to sign into beemerpost, but the site gives me issues with log in,and won’t let me post anything with out log in, I have e-sys on my laptop and e-cable believe I need a something “PSDZ” wether that is a file or program I’m not sure but I was told I need it. Any help would be greatly appreciated,as I don’t know what I’m doing
because you need to say to your car that you have installed this new one, the car are thinking that the old one are installed, in the video, the guy are explaining how to do that, download the sw, for 1 car its free, and buy or built a enet interface to make the changes
Victor Hugo Garza Cardenas what is sw? That’s not e sys right? I have the cable to connect car to laptop. Really wish there was just a local shop that could do this for me as I don’t want to mess my car up
How hard is it for novice to use e-sys to code into car for 6wb? I’m waiting on guy from Europe to code my f30 remotely , getting impatient as I only have speedometer and color change for modes working- no gas gage,rpm,hud,nav etc.
Fortunately no, as it says in the video i ran through the coding as an exercise to demonstrate how its done, it would not have worked as the PSDZ files i was using were outdated at the time. This was not a problem as once the VO was changed i was always going to use BMW's online ISTA to update the car and code everything correctly.
We only buy the units from BMW parts to ensure they come with the relevant warranty and known provenance, your local BMW dealership can help with this.
Good video, on the warning tips. A bit shallow but hits the main points. Thanks and next time dont be shy to talk and roll them selves in the video its hard work but everyone would appreciate it and it will be shown on the thumbs up! Anyway appreciate your time and effort on this it takes alot of work to do it!!!!!
Thank you, I completed the upgrade to a 6WB last week, I did notice the range was not the same after the swap and coding, the 6WA showed 392km the 6WB displays 456km, not sure if this is something to be concerned about.
Is this mod doesn't require fibre optic cable? It seems simpler than other 6wb retrofit procedure.
Hello, I want to change my standard cluster from miles to a standard cluster in km. After reprogramming and reflashing the new standard km cluster to match the original millage/km on the car, do you have to programme the car's ecu to accept the new km cluster ?
this settings can be changed by the software
So it's possible to have a full plug and play unit if you communicate the vin of the car where the unit is going to be installed to a specialist?
Hello, I see that you got an error at 6:47 RDBI_FTP and RDBI_SVK at 7:00 I'm getting the same errors trying to retrofit 6WB, after that cluster went blank not responding. How did you come across that error? Thanks
Hi. What happens if ISTA D tells you to Mount KOMBI (order no. XXXX)? Do you need to revert to the original cluster and/or buy a new one from BMW?
Can this one be fitted on F25 2016? If yes how I can comunicate with you? I leave in Scotland.
Hi. How much you will charge for programming the 6WB in F32? I can do the coding myself but since you can actually do the programming means that if my dealer wants to to a software upgrade I do not need to reconnect the old clusters right?
Absolutely correct, feel free to contact us in the workshop at INFO@BMWMAN.CO.UK for an estimated cost.
Is it possible to retrofit it on a bmw f20 with the 6wa? Thanks
Upgrade the car to latest sw level need to be done before retrofit digital cluster or with old cluster ?
Hi we tried to calibrate HUD BMW F10 It says choose shape Rombus,Trapez etc we choose and then try to fine tune like 1 is up 2 is down etc but it doesent change at all please help
Hi mate. How did you get the compass on the screen. It's that available to do it by Esys? How to do it? Thanks
Can Bimmer code or Bimmer link be used to coffee 6WB?
Hi where are you?
What would this cost to do on a 2016 420 f33?
can you code me 6wb online? I've already installed 6wb, but it doesn't show me the gears
I've recently had 6WB retrofitted to my F30 but when i code to code for the M. Performance cluster logo to appear i get M550d show up instead. Is there a way to recode this to show M Performance...?
i got the 6wb installed in my f30,was preprogrammed for my car by vin#,but it isnt working properly,will switch screen lay out and color in the different modes(blue ecopro,black comfort,red for sport and sport+) but my rpms,hud,gas gage,nav in cluster dont work. the guy from germany said my car needed to be reset-is this something i can do in beemercode or do i have to drop a mint at local dealership? ive tried to update thru usb stick from download at bmw website,car dosnt recognize it. any help would be most appriciated
post your issue to bimmerpost, they will help you
I’m Same guy as post above,I’ve tried figuring out how to sign into beemerpost, but the site gives me issues with log in,and won’t let me post anything with out log in, I have e-sys on my laptop and e-cable believe I need a something “PSDZ” wether that is a file or program I’m not sure but I was told I need it. Any help would be greatly appreciated,as I don’t know what I’m doing
because you need to say to your car that you have installed this new one, the car are thinking that the old one are installed, in the video, the guy are explaining how to do that, download the sw, for 1 car its free, and buy or built a enet interface to make the changes
Victor Hugo Garza Cardenas what is sw? That’s not e sys right? I have the cable to connect car to laptop. Really wish there was just a local shop that could do this for me as I don’t want to mess my car up
@@blendedradiusduetche2770 with esys, psdz are the files that esys use to reprogramm the modules.
I have a 2013 f34, do i need to buy the cluster from a specific model for it to work?
Talking about paying someone? How much to do it remotely?
How hard is it for novice to use e-sys to code into car for 6wb? I’m waiting on guy from Europe to code my f30 remotely , getting impatient as I only have speedometer and color change for modes working- no gas gage,rpm,hud,nav etc.
Did you get yours completed? I have the same functionality but esys doesn't give me a tal to flash the unit. Let me know anything you learned. Thanks.
You had some errors during esys coding operation. Any side effects from them?
Fortunately no, as it says in the video i ran through the coding as an exercise to demonstrate how its done, it would not have worked as the PSDZ files i was using were outdated at the time. This was not a problem as once the VO was changed i was always going to use BMW's online ISTA to update the car and code everything correctly.
Hey do you know anyone that does this in NY?
can u tell us the names of the software u used?
Where do you get the software!?
Hi, it is possible to the same with F45?
Im afraid not at the minute. Sorry.
can you do the coding for me remotely ?
Ciao mi interessa dove possa trovarlo
How much
Where can i buy this unit from mate
We only buy the units from BMW parts to ensure they come with the relevant warranty and known provenance, your local BMW dealership can help with this.