Is the slip you applied to the disk fired mugs more diluted than the one you applied on the leather hard mugs? If so, why is that? I am really interested in the Mishima technique as I saw it in Karatsu.
Yes, I adjust the thickness of the slip for either leather-hard or bisque-fired pieces. I’ve made two videos about the “Zogan” techniques, and I explain the reasons in them. Please check them out. Part1 ruclips.net/video/FQ1bRvUWg58/видео.htmlsi=uV24FIKWR986qCj0 Part2 ruclips.net/video/N_xM2BlkE4k/видео.htmlsi=Uu8SbEWDOHyeF0Z4
Your kiln looks like an electric kiln with filament wire but there was a flame source coming out of a port near the top. Is it a two source kiln of some kind? Very helpful video. Thank you.
Thank you for watching. This is an electric kiln that can be used for both oxidation and reduction firings. Gas has been added to produce the colors of reduction in the works.
Your work is beautiful. You've combined modern and traditional elements in a very pleasing way. It looks as though you use wax or fabric of some kind over the end of the stamp, what type of material is that? Is its purpose to allow the stamp to release from the pot easier?
In this video you apply the slip to bisque, but in previous videos you applied the slip at leather hard. Do you prefer one method over another to prevent flaking? Thank you.
Thank you for your comment. I apply white slip before or after bisque firing, depending on what is necessary for my work. I also show how I apply slip in the video below. Please take a look at it. ruclips.net/video/FQ1bRvUWg58/видео.html ruclips.net/video/N_xM2BlkE4k/видео.html
These cups are just SO lovely! Perfect for all sorts of coffee. I love ash glazes. And your very natural and poetic designs. I also love the attention to the bottom of the cup, as its so visible to others when you drink. You have a lovely channel and wonderful talent for pottery. ❤
Thank you. Applying white slip to the inside of the cup is primarily for aesthetic purposes. The contrast of the coffee color against the white enhances the appearance, giving the cup a softer ambiance.
I am a beginner so I need explanation on everything!!!! the white slip is just clay right? then , what is the last glaze you use ? please , thank you so much
Please take a look at another video where I show how I make white slip. I also use an ash glaze, but I recommend using a store-bought glaze for the beginning. ruclips.net/video/uqoyFxMIMvw/видео.htmlsi=QYFj66Ry2JxeC55y
How do you glaze the whole pot and not have the base stuck to the kiln? I’m struggling to glaze my own mugs so they’re fully water resistant but don’t meld to the shelf while firing.
![Making pasta bowls from start to finish [陶芸] パスタボウルを作る](http://i.ytimg.com/vi/6im1H1oBlqw/mqdefault.jpg)
Not only do I adore your cups, I so loved having just the sound of your work, and no extra sound.
Thank you. I hope you can feel the seasons through the sounds of insects and birds, and enjoy watching it.
@@WatajimaPotteryThank you. It's been a delight to watch
Watching and learning from your techniques and craft is wonderful, but I also really love the quiet and calm atmosphere you create in your videos.
Thank you so much. I’m very happy to hear that.
飛び入りのカフェに地元で作ったカップが置かれていたら用事がなくても通ってしまうだろうな。釉薬の色なのかカメラの色なのかグレーがかっているところが素敵。ありがとうございます。
ご視聴ありがとうございます！釉薬の厚みが薄いと茶色がかり、厚いとグレーかかります。やきものの手作りの良さと、お店の雰囲気が合いました。
Love love your new design of these cups. They are so simple but gorgeous. And the inlay at the base is such a surprise.
Thank you so much!
It's always so satisfying to watch you work. Very well done, Sir!!
Thank you so much!
This is a fantastic video. I appreciate you showing the finished product as well Thank you for some good ideas and inspiration.
Thank you!
So nice to see the entire process and the finished mug being used. Love your designs. Wish I was going to Copenhagen! Thanks!
Thank you! I'm happy to hear that.
Good work and idea👍👍👍 looking from Kuban✌
Beautiful, peaceful video and lovely mugs!
Thank you!
Very nice to watch your videos. Always learning a lot. Thank you!
Thank you!
They’re so beautiful. I love the handcrafted, organic quality, and large size like it’s meant to be used with both hands and full focus.
Thank you so much!
I love your work!! You are very talented and your creations are gorgeous!! I have been to your website and have some favorites there.
Thank you so much! I’m happy to hear that you found your favorites.
動画ありがとうございました。
今回は少し雰囲気が違う動画になりました。今回のコラボは初の取り組みです。
@@WatajimaPottery返信ありがとうございます。
作った作品が海を渡って使ってもらえるとはすごいですね❗
次なる挑戦頑張って下さい😊
Прекрасная атмосфера творчества.Очень простые и уютные чашки,ничего лишнего.Вы их пропитываете любовью!Спасибо вам за труд.
カップひとつ作るのにこんなに手間暇かけて作るものなんですね。
焼きあがったカップたちが特別なものに見えました。
もう100均で食器を買うことないな。
すてきな動画、ありがとうございました。
チャンネル登録しまーす。
ご視聴ありがとうございます！その言葉に救われます。
@@WatajimaPottery こちらこそです！
焼き物の世界を知るきっかけになりました。
いろんな動画アップされてるんですね。
じっくり楽しませていただきます🌼
beautiful work. Thanks for demonstrating.
They look so good! And your videos are so interesting and relaxing!
Thank you!
I hope the people and the customers of Kaffe are enjoying these well made, handcrafted mugs.
Thank you! I hope so too.
Hermoso trabajo
Que lindo proceso, hoy descubrí el canal ❤ Saludos desde Argentina !
gracias!
Is the slip you applied to the disk fired mugs more diluted than the one you applied on the leather hard mugs? If so, why is that? I am really interested in the Mishima technique as I saw it in Karatsu.
I also suppose your slip has a content of feldspar in order to adhere to the bisqued mugs.
Yes, I adjust the thickness of the slip for either leather-hard or bisque-fired pieces. I’ve made two videos about the “Zogan” techniques, and I explain the reasons in them. Please check them out.
Part1
ruclips.net/video/FQ1bRvUWg58/видео.htmlsi=uV24FIKWR986qCj0
Part2
ruclips.net/video/N_xM2BlkE4k/видео.htmlsi=Uu8SbEWDOHyeF0Z4
Thank you, I will check the videos.@@WatajimaPottery
素焼き後に白化粧しても良いんですね❤良いことを知りました
私の習ってる教室では素焼き前に白化粧が主だったので半乾きの土が割れたり潰れたりといろんなことが起こってたので私は怖くて白化粧をやったことがありませんでした
有難うございます❣️
ご視聴ありがとうございます。素焼き化粧は、施した後にすぐ釉薬をかけなければなりません。化粧土が乾燥してしまうと、剥がれますので気をつけましょう。また化粧土の相性もあるので、テストしてからのほうが良いです。
Your kiln looks like an electric kiln with filament wire but there was a flame source coming out of a port near the top. Is it a two source kiln of some kind? Very helpful video. Thank you.
Thank you for watching.
This is an electric kiln that can be used for both oxidation and reduction firings. Gas has been added to produce the colors of reduction in the works.
Beautiful work! Thanks for sharing!
Thank you!
Really beautiful mugs
Thank you!
Your work is beautiful. You've combined modern and traditional elements in a very pleasing way.
It looks as though you use wax or fabric of some kind over the end of the stamp, what type of material is that? Is its purpose to allow the stamp to release from the pot easier?
Thank you. Yes, I covered Inka stamps with synthetic rubber sheet. You can get them from nitrile gloves.
It is an amazing video, I learned so many skills. I love this video!
Thank you so much!
Good work man, i like 👍👍👍you have a right hands!!!
I really liked these chunky mugs
In this video you apply the slip to bisque, but in previous videos you applied the slip at leather hard. Do you prefer one method over another to prevent flaking? Thank you.
Thank you for your comment.
I apply white slip before or after bisque firing, depending on what is necessary for my work.
I also show how I apply slip in the video below. Please take a look at it.
ruclips.net/video/FQ1bRvUWg58/видео.html
ruclips.net/video/N_xM2BlkE4k/видео.html
So soothing and meditative to watch you make the cup:)
Thank you!
so beautiful
These cups are just SO lovely! Perfect for all sorts of coffee. I love ash glazes. And your very natural and poetic designs. I also love the attention to the bottom of the cup, as its so visible to others when you drink.
You have a lovely channel and wonderful talent for pottery. ❤
Thank you so much!
Awesome! What does the white slip do on the inside?
Thank you.
Applying white slip to the inside of the cup is primarily for aesthetic purposes. The contrast of the coffee color against the white enhances the appearance, giving the cup a softer ambiance.
I am a beginner so I need explanation on everything!!!! the white slip is just clay right? then , what is the last glaze you use ? please , thank you so much
Please take a look at another video where I show how I make white slip. I also use an ash glaze, but I recommend using a store-bought glaze for the beginning.
ruclips.net/video/uqoyFxMIMvw/видео.htmlsi=QYFj66Ry2JxeC55y
How do you glaze the whole pot and not have the base stuck to the kiln?
I’m struggling to glaze my own mugs so they’re fully water resistant but don’t meld to the shelf while firing.
My glaze uses a glaze that is resistant to dripping during firing.
素焼き後に 白化粧 その上に釉薬ですね？やってみます
土と化粧土と釉薬によっても相性がありますので、失敗することもあります。テストからはじめたほうがよいです。
Very nice
Where’s this shop coffee ☕️ shop ? Please 🙏
Thank you. Please check out the link to Kaffe's Instagram in the Description.
In Europa c'è la direttiva MOCA, per i privati che cristallina è scura?
Could you tell me what the “ash” glaze is?
Ash glaze is a type of glaze primarily made from wood ash or plant ash.
Thx! Beautiful work
Watajimaさん）コーヒーを飲むのにぴったりの素敵なマグカップですね。私も真似して作ってみたいです。ひとつ質問させてください。釉薬をマグカップ全体にかけておられますが、焼成時に高台やその周辺の釉薬が溶けて流れて、窯の置台に固着しないのでしょうか？何か技がありますか？
ご視聴ありがとうございます。私の釉薬は流れにくい釉薬です。窯の棚板に付かないように、高台の底はきれいにスポンジで釉薬を拭き取っております。
@@WatajimaPottery 😀流れにくい釉薬と底を拭き取るがポイントなんですね。参考になります。ありがとうございました。
追記）あらためて動画を見直して、11:40頃に高台についた釉薬はスポンジで拭き取りますと書いておられますね。
すいません。私の見落としでした。
白化粧のカップ、素敵です。
カップの内側の白化粧に貫入は入りますか？
ご視聴ありがとうございます。たまに化粧土が濃くなった場合に貫入が入ることもあります。なるべく均一に施すように心がけています。
What do you cover the mugs is?
I covered them with ash glaze.
陶芸初心者です。三島手線紋で使用している道具を詳しく知りたいです。
よろしくお願いします。
ご視聴ありがとうございます。縦線で使っている道具は彫刻刀の平スクイという道具です。平刀の先が曲がっているものです。
大きさはいろいろとあるみたいです。参考にどうぞメール便 ハイス鋼 彫刻刀 平スクイ 7.5mm サクラ柄 刃物 職人 家具 木…
[楽天] item.rakuten.co.jp/plusysbtob/405256/?scid=wi_ich_androidapp_item_share #Rakutenichiba
@@WatajimaPottery 早速、お返事ありがとうございます。
何回もすみません🙇♀️
3つ目のマグカップの模様、細い線の模様に使われている、赤いプラスチックの様に見えるのですが、何という道具でしょうか？
Też chcę taki kubek😅
Thank you!
Tuyệt vời ^^
Lo♡e
Do you need an apprentice?