Thank you, just come back from my first outing. I found a iron thingy and foil lots of foil 🤣. Your instructions will help me tune it better now 👍🏻 cheers.
Thank you so much for putting this video together, lm a newbie and kit doesn't cover operating in detail,found manual limited, but your video helped so again thank you, regards Rory
Just watched your video on the Quest 30. Unfortunately, we can't use ours on the fields. The owners have banned all detecting. We use ours on the beach. Do you need to set up differently for the beach? Or is it the same way setting up just in beach mode. Thanks
My Q30 that had the program problem,this is what i did. I left the machine on all night, because I could not switch it off. Next morning the battery was flat, so I put it on charge and when it had finished charging I went to switch it on, and everything has returned to normal with no more problem's. Some sort of freeze up ( Strange ).
Puchased my Quest Q30 in june, used it twice. Third time i switched it on the back light came on and no programs, and it will not switch off. Will have to send it back, ( Gutted ).
Just ordered my unit. I have a question, Can I just leave the auto ground tracking ON or do I have to turn it on every time I use the machine? Thank you
You can leave it on, I tend to have it on manual. Most detectors that are set to tracking will track momentarily to the strongest signal. They take a few moments to reset so as a result you could miss smaller faint targets like hammered coins. So by manually ground balancing your machine you will avoid this. If you are detecting in ground that has varying soil conditions then tracking will be a better option, but if your ground conditions are consistent and stable then manual will be a better option.
It is a function for the design engineers, it allows them to set up and align the pinpoint function. In essence it allows them to use the detector motion free to set up the accuracy of the pinpoint function.
It's the way in which you can tune your metal detector to the mineralisation in the ground. By doing this it allows your metal detector to run at peak performance. All ground types have different levels of mineralisation, this affects how you detector performs, so by balancing it to the ground it allows it to run correctly.
@@DrewVerdin with the machine turned off, press and hold the power button until you see the display reset. That should fix your chatter issue, give it a go and let me know how you get on.
@@HiddenHistoryHuntersDetecting you're a gem. It worked. Thank you for taking the time to reply and help me out. I was about to send the machine back. My machine came with 0 instructions or info on how to navigate through it.
É isso aí companheiro. Pois eu também tenho um canal no RUclips: Leon detectorismo e seu vídeo me dá mais ânimo pra continuar essa aventura. Pois se for possível se escreva no meu canal: Leon detectorismo obrigado! Que Deus abençoe sempre sua vida! Em nome do senhor Jesus Cristo.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Thank you, just come back from my first outing. I found a iron thingy and foil lots of foil 🤣. Your instructions will help me tune it better now 👍🏻 cheers.
Ha, that's the point I'm at now, going out tomorrow and got me a refresher :)
Great settings demo, straight to the point and simple 🤙
-D9D
Thanks, glad you liked it
nice one. I will soon be receiving a Q30+ as a backup to my nox. look forward to trying it out 👍
Enjoy it
@@HiddenHistoryHuntersDetecting two hunts so far and got some nice bits. I like it 🙂 👍
@@TheDarkKnightDetectorist It's a fast little machine that loves the silver 👌
Thank you so much for putting this video together, lm a newbie and kit doesn't cover operating in detail,found manual limited, but your video helped so again thank you, regards Rory
You are welcome, that's what this video is for. If you have any other questions just ask.
Thank you for the informative video.
Hola Ottis, tendrás un vídeo de configuración del Q60 en campo y playa? Gracias!!!
Hi! Is there any chance you can use different targets to see what they ID as? Thanks! Great Video!
I will try and get that done for you 👍
Nice one Mate, thanks
Great video as always Ottis 👍🏼
Just watched your video on the Quest 30. Unfortunately, we can't use ours on the fields. The owners have banned all detecting. We use ours on the beach. Do you need to set up differently for the beach? Or is it the same way setting up just in beach mode. Thanks
Great vid I have the 30+ it has an extra icon low tone all’s I am getting when out is iron and steel can you help thanks
well instructed video learned allot thanks..
Hi, I sometimes find, some field will not ground balance, I’m I doing something wrong?
My Q30 that had the program problem,this is what i did.
I left the machine on all night, because I could not switch it off.
Next morning the battery was flat, so I put it on charge and when it had finished charging I went to switch it on, and everything has returned to normal with no more problem's.
Some sort of freeze up ( Strange ).
Q30 when the coil pointing to the air why its chirping?
Detector muito top parabéns pelo o vídeo!!!!
Puchased my Quest Q30 in june, used it twice. Third time i switched it on the back light came on and no programs, and it will not switch off. Will have to send it back, ( Gutted ).
Sorry to hear that. Hopefully your supplier will look after you and get it sorted., Let me know how you got on.
Nice Demo. Thanks :-) Ps. Next time please wash your detector before filming :-) Again, great video :-)
Thanks.
All my metal detectors are there to be used in the way they were intended, they aren’t a display item to be polished 👍
Just ordered my unit. I have a question, Can I just leave the auto ground tracking ON or do I have to turn it on every time I use the machine? Thank you
You can leave it on, I tend to have it on manual. Most detectors that are set to tracking will track momentarily to the strongest signal. They take a few moments to reset so as a result you could miss smaller faint targets like hammered coins. So by manually ground balancing your machine you will avoid this. If you are detecting in ground that has varying soil conditions then tracking will be a better option, but if your ground conditions are consistent and stable then manual will be a better option.
@@HiddenHistoryHuntersDetecting Thank you for your help 👍
Спасибо, Рахмет!!!
How deep can detect q30????
What is AM static on the quest 30
It is a function for the design engineers, it allows them to set up and align the pinpoint function. In essence it allows them to use the detector motion free to set up the accuracy of the pinpoint function.
Thanks 👍
What is ground balance?
It's the way in which you can tune your metal detector to the mineralisation in the ground. By doing this it allows your metal detector to run at peak performance. All ground types have different levels of mineralisation, this affects how you detector performs, so by balancing it to the ground it allows it to run correctly.
My quest 30 is making light chattering no matter if its in the air or on the ground. What's going on?
Have you done a factory reset?
@@HiddenHistoryHuntersDetecting how do you do that
@@DrewVerdin with the machine turned off, press and hold the power button until you see the display reset.
That should fix your chatter issue, give it a go and let me know how you get on.
@@HiddenHistoryHuntersDetecting you're a gem. It worked. Thank you for taking the time to reply and help me out. I was about to send the machine back. My machine came with 0 instructions or info on how to navigate through it.
@@DrewVerdin no problem, glad it’s sorted for you. Feel free to message if you have any other issues m.
Molim vas neko mi neko stručan odgovori koji je bolji detektor quest 30 ili nokta simpleks?
Good
Thanks
👋🇳🇱👍
É isso aí companheiro. Pois eu também tenho um canal no RUclips: Leon detectorismo e seu vídeo me dá mais ânimo pra continuar essa aventura. Pois se for possível se escreva no meu canal: Leon detectorismo obrigado! Que Deus abençoe sempre sua vida! Em nome do senhor Jesus Cristo.