GMC Sierra Denali 1500 leveled on 35” Tires
HTML-код
- Опубликовано: 10 сен 2024
- 2017 GMC Sierra Denali 1500
35” 12.50” r22
Stock 22” wheels
2.5” rough country level
Slight trimming in front and full tilt there is a slight rub on sway bar
Let me know if there is any angles you want to see or anything thing else.
I’m glad I found this video I did the same to mine
Smart man! It’s a good look man!
Beautiful truck!!! I plan on installing 35’s on my 2015 silverado w/ same wheels. This video just ok’d my plans. Thank you Brotha👍
Any feedback on the GMC with 35’s? Looking to put them on my 2018 but just wanted to check and see if there was any good or bad feedback on your experience? Just curious what did it drop your mpg to?
I would never go back to 33” again. The way they looked and filled the well, was perfect. There was small trimming needed and at full turn, it rubs the control arm. MPG is like 15-17 on the highway
@@Dadplaysgolf can you provide more info on what was trimmed? Just plastics? Thanks!
What size rims are those 20 or 22
@@dhkjr456 those are 22" rims
Is this set up good for some towing? Not extreme towing but “camper weight” towing?
Hey I put 35 on my truck after looking at your video..I have the 2 inch block on the front which is good..I rear shocks are bottoming out I was wondering what size rear shocks I need.. The stock shocks are 4.50 to 8 inch.. I have a Denali just like yours..I have the 3 inch blocks on the back too.
I just took off my 33x12.5x22 and had 35s put on my 2017. I have the exact truck in silver
Any rubbing with the 35x12.5?? I have an 18 silver sierra. 3” level. Saw they rub a bit but didn’t know if you had spacers on yours
@@midwestvibes5284i got an 18 and about to put a 3.5 lift on it, want to know if putting in 35s -12 offset 12.5 wide R18 works well
What leveling kit did you go with and how much ?
What brand tires are these?? very nice looking truck by the way 💪🏻🔥
What kind of tires are them? Like the size of them?
Hey did you have to do any trimming when you had the 33s? & did it rub any?
0 trimming, no rubbing at all with a 2.5” level.
Ok thank.
they late comment but i wanted to know if you don’t rub your control arms because i gotta 2022 gmc 1500 and im running a 2.5 and i got some 35s 12.5 on the stock rim wondering if i slap those on will i have to run spacers or it didn’t rub your control arms?
It wont rub mines doesn't did a lil trimming on the back of front fender wall...I don't have any spacers.
Hey bud, are those the factors 22” rims or did you go OEMreplicas? If you did go the ladder can ya point me in good direction? Appreciate it and the truck looks fantastic! The tread on those are gnarly..how’s the hum?
Those are straight from the factory. I didn’t know the hum was loud until I got a new truck and out ridge Grapplers on.
Will it fit in a 7’ft Garage ??
Do you have power running boards on this truck? I am interested in getting rid of the fat chrome stock ones and changing them out for the thin black style that tuck under the body…curious if I could just change out the steps but I’m assuming I need to change the whole running board system
It did not, but my new truck has them and I wouldn’t want anything else.
@@Dadplaysgolf Just vinyl wrap the chrome or pull the end cap off and slide the chrome trim off the stock RB
Was it just plastics for a trim? I hear a lot of the rubbing is on metal on the pinch weld, most cases needing a Norcal mod.
Just small trimming, but yes, in reverse at full turn it rubs
Thanks Ken! Not enough rubbing to warrant any metal cutting it sounds like.
@@aaronhartung3563 no way! The small amount of the time you actually rub, it’s not worth changing that
you running spacers man ? & did u just level the front ? & kept the rear stock ?
No spacers, 2.5” level. Nothing in the rear. Small rub at fill turn
Are these stock denali wheels or reps? I want these same ones
These are stock my friend. Gmc denali comes with an option for 22’s
2.5 in the front what size block in the back?
Stock in the rear. It actually still dips a tad. I think the year and model you need 3.5” to be perfect.
Plenty of clearance with your upper control arm?
Slight rub at full steering rotation.
You still riding like this? How’s it been? Any wear and tear to the suspension?
I put 75,000 miles on those tires and they still had 40% tread on them. Rode like a champ. Suspension is fine. I have a new truck now
Cool thanks for the response! And check mine out I’m thinking of doin the same set up rims and all
Any trimming in the front behind the wheel? Where the mudflap would be? Buying 35” nitto recons.
What leveling kit did you use?
2.5” RC
Would it be the same for a 2014 ?
Unfortunately, I’m not sure. Wish I could help ya.
This a 2.5” leveling kit ?
Yeah, but it still sits a tough lower in the fronnt
What tire brand are those ?
Toyo Open Country Mt
2.5” lift you say?
Yes 👍🏼
@@Dadplaysgolf I’m about to put 35x12.50r17 on my 2015 gmc sierra 1500 and I’m hoping they will fit like yours I got a 3” leveling kit so hope it work
@@vonoutdoors4888 sounds like it will look mean! It may rub when you lick the wheel out, but other than that, 33” is to small!
I have a 2014 gmc denali. With this same leveling kit you think it would be okay?
4x4?
4x4