If I could give this video more than 1 thumbs up I would. It took me all day and all night and I finally finished. Definitely was a life saver and cash saver. I studied this video for over two weeks 😪
Reba Noel Awesome!! I am in the process of making my own letters right now but it’s taking me forever and a day just to close the letters in!! Any quick tips?
I watch RUclips video daily for DIY projects and I must say "THIS IS THE BEST VIDEO I HAVE SEEN HERE FOR A DIY!!!" Thank you so much for making it. I'll be making one for my daughter's baby shower instead of paying $250 to rent one.
The best video for this ever & didn’t have to search long was one of the first videos that showed up! I say thanks a lot for the detailed video because them letter are to expensive on Amazon etc… especially if you need a lot
Drea Bia I thought the same thing. I was looking at everything but I was blown away about those cups 🤯🤬 I am definitely going to have to watch that part again with the cups and the filling of the sides etc. that is where I was like 🤔🤬😤However I am glad that she took the time to share this video.
Thank you for sharing. May your business be abundantly blessed. Your video is helping me create a nice table for my sister's wedding. I wish more women were supportive in sharing their talents to her other inspiring women.
Delayed response but thank you!! If you have a picture of the table and don't mind us sharing, please send to our e-mail highlyfavoredevntsonline@gmail.com. Thank you!
I love this video.. I hope that you can tell me after you downloaded the college block letters, how did you save it on file and how did you send it to staples to print..
I love this& i wanted to share to wear a mask whenever you use the e6000 glue. My mom's friend used that glue religiously because of her shoe bling business. She had been experiencing really intense head aches& went to the dr to see what was wrong.. She had developed cancer due to the fumes..
BrayDiva yes ma’am. We tested it for a few hours the day before the event. Day of it had all those treats for about 3-4 hours before they started taking them.
So 1st i love video... my 50th bday party coming my name has 7 letters So I wanted to make sure that I had the measurements correct because on the video you actually said 32 inches tall in the comments it says 18 by 30 which is the correct measurement? Also am I to understand that I can use Those letters as the actual legs of the table if I buy a sheet of plexiglass? Also will that 18 x 30 /32 will work with like 8ft table with legs will it fit like yours under a table?
You are the BOMB!! Thank you for sharing this. I have been looking for how to make mine because I could not afford the pricey one out there. Thank you so much!!
How did you repair the "E" when it had a little dent imperfection? I love, love, love this video. Thank you. I am thinking of just doing the word "LOVE", for multipurpose use. Valentine's Day, "LOVE" Candy Bar, "LOVE" beverages or food, etc.
Hey beautiful thanks.... what size hot pen do you have and do it smoke bad? What company is it by? Can you use it on a foam board ..... I got a lot of bad reviews on the one from Joanns and Michaels
Thank you so much for watching our video! GOCHANGE Foam Cutter Electric Cutting Machine Pen Tools Kit, 100-240V /15W Craft Hot Knife 10CM Styrofoam Cutting Pen with Electronic Voltage Transformer Adapter 24”x78” Chrome Mirror Silver Vinyl Wrap Sticker Decal Film Sheet, Self-Adhesive The pen seems to be no longer available but you can search styrofoam cutting pen and something should come up or copy and paste the item above and see the results. I hope this helps but if not please feel free to reach out again. Don’t forget to subscribe. More craft videos coming soon! Including Cricut videos!
Thank you so much for watching our video! GOCHANGE Foam Cutter Electric Cutting Machine Pen Tools Kit, 100-240V /15W Craft Hot Knife 10CM Styrofoam Cutting Pen with Electronic Voltage Transformer Adapter 24”x78” Chrome Mirror Silver Vinyl Wrap Sticker Decal Film Sheet, Self-Adhesive The pen seems to be no longer available but you can search styrofoam cutting pen and something should come up or copy and paste the item above and see the results. I hope this helps but if not please feel free to reach out again. Don’t forget to subscribe and click the notification bell. More craft videos coming soon! Including Cricut videos!
Cut the letter first. Then applied vinyl wrap adhesive and use the cutter to cut it to the shape of letter. The plexiglass was the tabletop and didn't nee anything done to it.
Highly Favored Events No. just appreciated your video. Very helpful. However I did want to ask in order for the letters to stand the bottom has to be straight and not rounded, correct? Did you cut the bottom of the letters straight across?
This maybe a stupid question but did you just measure to get the right cuts to go around the to cover the cups? Also can paint these so it can be different colors And what’s the adhesive called from amazon?
Hello can we make the 3D giant letters without using the foam cups inside? Or it won’t hold the cake? And can we replace the plexiglass on top with a normal foam board because it is cheaper
Omg I think I can do this I seen a table for a first birthday ONE letters and I loved it my grandaughters turning 1 in 2 weeks I would love to do this. My question is where to get the top part of the table?
bukky akins Hi. If you see the last picture, it held cake, cupcakes, jars of candies and treats. I’m not sure how it will be with glass because glass is heavier than plexiglass.
Thank you for this video you don’t know how much you helped me other you tubers make you try to guess with their limited instruction you are the best thanks again 🥰
viola arrington the sides were measured from one point to the other for all the letters. The width was the same, just need the length. Cut each piece and glue them one by one.
What measurements did you use for the pixie glass . I made mines 36in tall and about 8X16 wide. What what measurements do you suggest for the pixie glass ?
Thanks love! I'm not sure about the paint. I've read that sometimes it'll eat the paint and to get a foam hardener and then pain. But the hardeners are expensive too. So that's why we just used the decal.
Bernadine Cox thank you. All the supplies and materials used along the vendors are listed in the description. Press the down arrow right under the video.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
I love it when people share how to do certain things. I really appreciate you and I pray your business keep growing.
Women Helping Women
Nobyjay O380 Thanks for watching love and for the prayers. ❤️
I'm just seeing this and I'm overjoyed. Thanks love.
you're the best....so many ppl haven't been wanting to share how to do these like it's the krabby patty secret formula....thank you sooo much
Trust me. I understand. It's not that serious. Why not let everyone be successful!
Highly Favored Events Thanks for sharing
Don't they tho!!
Neci Boo lmaooo you ain’t never lied! 😂😂
Lesa Richards where can I find the glass been everywhere
If I could give this video more than 1 thumbs up I would. It took me all day and all night and I finally finished. Definitely was a life saver and cash saver. I studied this video for over two weeks 😪
Reba Noel Awesome!! I am in the process of making my own letters right now but it’s taking me forever and a day just to close the letters in!! Any quick tips?
Oh wow! Just seeing this. Do you have a picture of what you made? Thanks for watching our video!!
How sturdy is it
I watch RUclips video daily for DIY projects and I must say "THIS IS THE BEST VIDEO I HAVE SEEN HERE FOR A DIY!!!" Thank you so much for making it. I'll be making one for my daughter's baby shower instead of paying $250 to rent one.
I know Melinda (My name TOO!) YOU VIDEO TWO YEARS LATER THIS IS STILL THE BEST EVER VIDEO!
Finally someone sharing and making it simple to follow. Awesome job...God bless you and your business
Earthangel171 thanks love. Good luck!!
This is the best Tutorial on Jumbo letters that I have seen. Thank you so much.
Thanks! Just trying to help others out.
Thank you fir such a detailed video. I will grab the supplies and give this a try. I would love to see more videos of other projects too!
The best video for this ever & didn’t have to search long was one of the first videos that showed up! I say thanks a lot for the detailed video because them letter are to expensive on Amazon etc… especially if you need a lot
Love this idea queen I have a question where do you get the top part of the table from?
You did an awesome job. The tutorial was easy to follow. I have to try to do this for my daughter’s baby shower in a few months. She will LOVE this.
ROSLYN JONES Thank you!! It’s a must have. 🤗
Wow. I was like what a great DIY idea until you got to the cups and then I was like what a great idea to pay someone to create! 😆 it looked fantastic
lol for real
Hahaha! Thanks love.
Drea Bia I thought the same thing. I was looking at everything but I was blown away about those cups 🤯🤬 I am definitely going to have to watch that part again with the cups and the filling of the sides etc. that is where I was like 🤔🤬😤However I am glad that she took the time to share this video.
I found a hot foam pen at Joanns for 24.00 but when I whipped out that 40% coupon...👀$16.12🙈✔✔ #imbrokeashell
Thanks for sharing!
Haha! Love those 40% off coupons!
What is the brand? Does it still work?
Yassss thanks for sharing🤗
Thank you for sharing. May your business be abundantly blessed. Your video is helping me create a nice table for my sister's wedding. I wish more women were supportive in sharing their talents to her other inspiring women.
Delayed response but thank you!! If you have a picture of the table and don't mind us sharing, please send to our e-mail highlyfavoredevntsonline@gmail.com. Thank you!
Wow...thanks for the step by step tutorial. My twins graduation party will be even more amazing!
You're welcome!! Congrats to your twins and good luck!
I will use a straight edge to make sure the lines are perfect. I will also glue the boards together instead of using the foam cups. Thank you!
Will it be wide enough for the table?
So glad my daughter only has 4 letters in her name! Thank you!
Always happy to help!
Highly Favored Events Hey, I Really Need Your Help. Did You See My Comment?
Bee Nicolee Yes. Let us know if you have more questions.
You're very talented.... and PATIENT! Thank you for sharing!
Extremely patient enough to do it once, lol. Thanks love!
I love this video.. I hope that you can tell me after you downloaded the college block letters, how did you save it on file and how did you send it to staples to print..
Love it !!!! I purchased love letters each one for $200 now I need my sons name
You saved my life cz his name irs long
Oh wow!!! Hopefully, you're receiving a good investment with them. This method will definitely cost you way less.
The best tutorial I have yet to see. Great job!
Thanks love!
Thank you for sharing what you know. You are a true blessing.
Thank you! Good luck.
Wow ..........Beautiful and Amazing
Thank you soooooo much for sharing your information.
You're welcome, love! Thanks for watching!
"WOW"
That turned out so BEAUTIFUL
Thanks love!
When you download the front to computer what did you take to staples for them to print and what size did you tell staples you needed.
What size glass top did u have
Thank you for this! You just saved me hundreds of dollars for my photography props.
Trisha Eason you’re welcome love
Thanks for sharing! Thanks for the step by step instructions, prices,and supply stores.
This was such a great detailed how to video thank you so much for sharing !
Of course. Thanks love!
Wow, end result came out great!
I love this& i wanted to share to wear a mask whenever you use the e6000 glue. My mom's friend used that glue religiously because of her shoe bling business. She had been experiencing really intense head aches& went to the dr to see what was wrong.. She had developed cancer due to the fumes..
Deseray Marshay omg. That’s scary. Thank you for sharing. We’ll definitely use a mask from now on. Prayers for her health.
Highly Favored Events thank you& no problem💗
You just saved me hundreds of dollars planning my Baby Shower. Thank you so much!!! 💕💕
Kattia Powell awesome! We’re all about saving. God bless your pregnancy. ❤️
Kattia Powell did you try it? Was it sturdy?
So this foam would actually hold the glass down without falling apart?
BrayDiva yes ma’am. We tested it for a few hours the day before the event. Day of it had all those treats for about 3-4 hours before they started taking them.
I'm sure it's probably plexiglass. I wouldn't do real glass. Too heavy.
So 1st i love video... my 50th bday party coming my name has 7 letters So I wanted to make sure that I had the measurements correct because on the video you actually said 32 inches tall in the comments it says 18 by 30 which is the correct measurement? Also am I to understand that I can use Those letters as the actual legs of the table if I buy a sheet of plexiglass? Also will that 18 x 30 /32 will work with like 8ft table with legs will it fit like yours under a table?
Thank you love it !!! Everyone else I looked at made it difficult to follow! You made it easy and simple
Our pleasure!!!!! Thank you for the support!!!!
Omg you should make more diy videos. Your awesome.
We will. Thank you!
This looks amazing. Thank you for sharing your whole process from beginning to end, I'm very inspired.
Thank you love.
Do u have to glue the cups together before gluing them to the letter?
Thank you for sharing iam going to make it for my nince baby shower💚
Thank you for sharing - you are blessed already beyond measure for your willingness!!
A Crafty Blank you’re welcome!
This is soooo awesome! Excellent job!!!!!!
Tricia Vicks thank you!!
You are the BOMB!! Thank you for sharing this. I have been looking for how to make mine because I could not afford the pricey one out there. Thank you so much!!
Thanks for watching! Hope it helps. Good luck!
How did you repair the "E" when it had a little dent imperfection? I love, love, love this video. Thank you. I am thinking of just doing the word "LOVE", for multipurpose use. Valentine's Day, "LOVE" Candy Bar, "LOVE" beverages or food, etc.
We just left it as is. Because it had the vinyl over the front of the letter it’s went unnoticed. Thanks for watching!
You have talent! You are awesome! Thank you!
Hey beautiful thanks.... what size hot pen do you have and do it smoke bad? What company is it by? Can you use it on a foam board ..... I got a lot of bad reviews on the one from Joanns and Michaels
Amazing! How is the tabletop supported in the back?
Where do i find the glass to put on top
Professional Plastics
I will be doing this for my daughter wedding thanks for sharing
Awesome. Congrats.
Wow thank you so much I need to see this for my baby shower
Shelaine Kelleybrew you’re welcome and congrats on the baby!
Excellent work. I thank you for such detailed advice. You're so appreciated
It this holding up the tables at the end they look great did you use anything else to avoid it from falling apart
Vileisy the tabletop was the length of the letters. It was just placed on top of the letters without anything else
I love the visro2 but what dis u use as the top glass
What is visro2? We use acrylic glass from Professional Plastics
THANK YOU sooo much for sharing your knowledge with us!!! Many blessings your way!
Ann C. Of course love. Thank you!
Loved the tutorial, very helpful. Thank you. Making my first project for a baby shower coming up.
Thanks for watching! Good luck. E-mail us pics if you can.
Enjoyed the video please send correct name of cutter and decal film. Thanks
Thank you so much for watching our video!
GOCHANGE Foam Cutter Electric Cutting Machine Pen Tools Kit, 100-240V /15W Craft Hot Knife 10CM Styrofoam Cutting Pen with Electronic Voltage Transformer Adapter
24”x78” Chrome Mirror Silver Vinyl Wrap Sticker Decal Film Sheet, Self-Adhesive
The pen seems to be no longer available but you can search styrofoam cutting pen and something should come up or copy and paste the item above and see the results.
I hope this helps but if not please feel free to reach out again. Don’t forget to subscribe. More craft videos coming soon! Including Cricut videos!
Thank you so much for watching our video!
GOCHANGE Foam Cutter Electric Cutting Machine Pen Tools Kit, 100-240V /15W Craft Hot Knife 10CM Styrofoam Cutting Pen with Electronic Voltage Transformer Adapter
24”x78” Chrome Mirror Silver Vinyl Wrap Sticker Decal Film Sheet, Self-Adhesive
The pen seems to be no longer available but you can search styrofoam cutting pen and something should come up or copy and paste the item above and see the results.
I hope this helps but if not please feel free to reach out again. Don’t forget to subscribe and click the notification bell. More craft videos coming soon! Including Cricut videos!
Great tutorial. Thanks for sharing. Be blessed.
Thank you!!
Nice! What are the proper measurements for the glass
Thank you for sharing. Blessings
When sending letters t staples to be printed, how exactly are you doing them? i sent my letters and the are not 32 high and 18 wide at all.
I went to the store and ensured it was done properly.
this is a work of art, with simple products and the outcome is lovely... thank you for your tutorial :)
Simplicity is key. Thank you!
Highly Favored Events where did you purchase the plexiglass and what length and thickness did you use? Thanks!
Omg I don’t have to pay like $300 on etsy for one of these. Thank you so much 😊
Where did you get your plexiglass and how many pieces did you use?
Amazing , I love it , you made it look so easy with this step by step video . Thank you 🙏
dananaz12 thanks love. Good luck!
So did you apply the vinyl wrap adhesive 1st? Cut it and then apply the acrylic plexiglass sheets then cut in the shape of the letter?
Cut the letter first. Then applied vinyl wrap adhesive and use the cutter to cut it to the shape of letter. The plexiglass was the tabletop and didn't nee anything done to it.
Highly Favored Events thank you. Are you guys still doing Vlog’s
@@medabrittman Unfortunately we've been busy and haven't had an opportunity to upload. Are you interested in something in particular?
Highly Favored Events No. just appreciated your video. Very helpful. However I did want to ask in order for the letters to stand the bottom has to be straight and not rounded, correct? Did you cut the bottom of the letters straight across?
That looks great!
Thank you!
Did you secure the plexiglass with anything or just rested it on the letters ?
Julianna Arroyo no ma’am. They just laid atop the letters.
How did you know what size acrylic sheets to get?
Thanks for the info. I would like to know how much is the depth and width of the letters.
You're welcome, love. Enlarged Letters 18" x 30". For more info, please go to the description of the video.
WOW!!!!
That turned out sooo
Beautiful...
Judi Christopher thank you!
Thank you for sharing!! 💕 I have a question, how do you cover the paper cups on letters that contains curves such as S or U?
Santera Edwards Hi! Due to the font these letters are angled and not curved so there’s no issues.
Thank you for replying!! 💕
Why not use foam board for stability inside instead of cups ?
Didn't think of that. How would you do so?
Highly Favored Events I guess just straight pieces spaced inside
Thanks for the video! Would you be able to paint these? If so what kind of paint
Sheila Machuca We do not have any recommendations. Just check to see if the paint can go on styrofoam.
This maybe a stupid question but did you just measure to get the right cuts to go around the to cover the cups?
Also can paint these so it can be different colors
And what’s the adhesive called from amazon?
Yes ma'am. I just forgot to record that part. Ensure the paint can go on Styrofoam and you'll be good to go.
Omg I so love you for this! One day I will have time to try this for my treat table set ups
Thank you. It's definitely time consuming. Good luck!
This is great ! Off hand do you know how many boards I would need for a three letter word ?
Thank you so much for watching our video. I would say 2 just to be safe but typically 1.
may i know how do u enlarge and print the letter
Hello can we make the 3D giant letters without using the foam cups inside? Or it won’t hold the cake? And can we replace the plexiglass on top with a normal foam board because it is cheaper
Omg I think I can do this I seen a table for a first birthday ONE letters and I loved it my grandaughters turning 1 in 2 weeks I would love to do this. My question is where to get the top part of the table?
Will definitely try this project, I will be saving hundreds of dollars. You've gained a subscriber!
Awesome. Thanks love!
Thanks for sharing, please is this strong enough to put cake on top as well as class sheet?
bukky akins Hi. If you see the last picture, it held cake, cupcakes, jars of candies and treats. I’m not sure how it will be with glass because glass is heavier than plexiglass.
love this....i want to make a 2 giant 50's. Will 2 boards be enough?
Yes ma'am. We used 4 boards for 7 letters
Thank you for this video you don’t know how much you helped me other you tubers make you try to guess with their limited instruction you are the best thanks again 🥰
Awesome! Thanks for watching.
Thank You for this video.. How exactly do I do the sides for the letters that you've done.
My son & I are going to try to master the letters.
viola arrington the sides were measured from one point to the other for all the letters. The width was the same, just need the length. Cut each piece and glue them one by one.
Where you get the top part of the table is glass?
You could use plexiglass for the top, from Home Depot or Lowe’s
Thank you so much for this tutorial!
How much weight do you think three take can hold and what did you use as the table top?
I'm not sure, but we had several items on our table including a 3 tiered cake. We used an acrylic top from Professional Plastics.
Do you know where I could find foam blocks this big so I could just cut the letters from that?
No. I'm sure a wholesaler.
Where did you get the letter template from?
How did the hot glue not melt the styrofoam
Beautiful work. Can you tell me the measurements of the plexi glass..like the thickness width/length?
Hi, it's in the information section of the video. Click 'show more'.
Great Job 👍👍 Thanks for being so detailed !!!
omg... that is awesome.... great job... such creativity
Sharonda Laidback Thank you kindly.
Highly Favored Events .... you are very welcome....
Wow thats a lot of work 👌🏿
Yes. Yes, it is.
Do you have link to enlarge letters at staples ? I can’t find them . Thank you in advance
Miss Kelly I could make the printouts for you! Email me collageandwood@gmail.com
Hi, we apologize for the late response. We went in person.
What measurements did you use for the pixie glass . I made mines 36in tall and about 8X16 wide. What what measurements do you suggest for the pixie glass ?
I love your video it was very detailed! Is it possible to paint the foam if so what paint would you recommend?
Thanks love! I'm not sure about the paint. I've read that sometimes it'll eat the paint and to get a foam hardener and then pain. But the hardeners are expensive too. So that's why we just used the decal.
Highly Favored Events ok thanks and yes I rather use decal to that way it looks great and can save money!!
Hello great tutorial, what size plexi glass sheet did you use or was it an acrylic sheet
Bernadine Cox thank you. All the supplies and materials used along the vendors are listed in the description. Press the down arrow right under the video.
yes it is thank you I failed to read it all sorry lol
I love this!! How much would you charge to do letters??
great video, how can I print the enlarged letter from staples?
Go in person and request them to print it 18" (width) x 30" (height)
Very nice,I just use heavy duty strong paper boxes.
From where? Sounds pricey.