AXBB-E Ethernet CNC Controller #4 DC I/O's and Port 3 UCSB Board
HTML-код
- Опубликовано: 5 окт 2024
- Showing the idea of I/O setup in the AXBB-E CNC Motion Controller. The controller has 3 ports which deliver different kinds of Inputs and Outputs. We will take a look how to configure inputs and outputs. Also I'll try to make some tests of the UCSB Breakout Board which allows us to expand the I/O of the AXBB-E Controller by 12 more outputs and 5 inputs.
Here is the controller seen in video:
👉 cncdrive.com/A...
👉 cncdrive.com/d...
👉 cncdrive.com/U...
👉 cncdrive.com/d...
AXBB-E and UCCNC related videos:
AXBB-E - Basic Setup 👉 • AXBB-E Ethernet CNC Co...
AXBB-E - AC Servo Setup 👉 • AXBB-E Ethernet CNC Co...
AXBB-E - Spindle Outputs Setup 👉 • AXBB-E Ethernet CNC Co...
AXBB-E - I/O + UCSB Setup 👉 • AXBB-E Ethernet CNC Co...
If you find my channel interesting or helpful - you can consider becoming my Patron on Patreon.com or a Member of my RUclips Channel Support!
Subscribe and hit the like button if you like the video and want more!
👉 / gbwm
👉 / @gbwm_cnc
Questions? - Comment down below.
Thanks for watching!
CNC Conversion of a Milling Machine: 👉 • CNC Conversion - Manua...
Milling Machine Restoration: 👉 • FUS 200 Universal Mill...
DIY CNC Metal Lathe Build: 👉 • DIY CNC Metal Lathe Build
Machine Builds: 👉 • Machine Builds (full v...
CNC Videos: 👉 • CNC
Welding Videos: 👉 • Welding
DIY: 👉 • DIY HowTo
AXBB-E/UCCNC: 👉 • AXBB-E
Facebook Page 👉 / gbwmcnc
RUclips Channel 👉 / gbwmweldingmachiningcnc
Twitter 👉 / gbwm6
Instagram 👉 / gbwm_cnc
Tumblr 👉 / gbwm-cnc
TikTok 👉 tiktok.com/@gbwm_cnc
Next week I'll show the first tests of my DIY CNC Conversion of an old manual milling machine using this controller! Stay tuned!
Thanks for watching!
Thanks, I'm just trying to connect UCSB myself. For example, in order to connect many sensore or anything else in parallel, I decided to use PCB terminals, I want to solder the boards, instead of terminal blocks like yours, to be cleaner)) And so your videos are very useful. Please continue.
Great! There are so many inputs in this controller with the additional port 3 and I still would have some ideas for more inputs (for example I had to wire up the limit switches in parallel in my machine). I'm glad my videos are helpful.
No me jodas que hablas español!!! Y yo aquí devanandome los sesos para escribirte. 😂😂 Gracias por tu trabajo. Ya he pedido una AXBB-E con la ampliación y el software. Hace años que uso MACH3 y quiero probar este que me han dicho que va muy bien. La verdad es que lo beses cargado y lo he trasteado en modo demo y tiene muy buena pinta. El lunes sale todo desde Hungría para España. Gracias!!!
¡Hola! Lamentablemente para el español uso el traductor de Google :) Me alegra que te gusten mis videos y te deseo lo mejor con la AXBB-E. Parece que es un gran controlador :)
good video..thanks for your time
Thank you! :)
Nie wiem o co chodzi ale widzę że działa 😀👍dla zasięgu
😂😁
More slow the messages on screen please!!!!
I will try to improve that in the future. Thanks
@@GBWM_CNC Thanks to you for your job. It’s only a suggestion because you give very important information in your videos trough this written banner and in my opinion people must read them. Thanks again from Spain.
@@estebanalgar4704 You're right. There is one thing though - I want these videos to be at least a bit dynamic. I will try to improve the text length though :)
Supper💪 how to repair all these things and remote access. I wait how is work😊
This week I will show first effects! :)
thanks for this video,would you please recommend me a touch screen to use with AXBB-E?
Thanks for watching!
I use on my machine an asus vt207n (used one, bought for cheap, works fine). But beyond that - I don't have any more experience with touch displays :)
Hi, I'm french. I have an AXBBE and I don't manage to install my probe. There is 3 wires : signal, + and -. Can you help me to install it and configured correctly on UCCNC. Thanks you
Hi! I'll make a video about that soon. My probe is a 24VDC NPN sensor. So I wired mine to the + and - and the input 4 of port 2 if I remember correctly. If your probe is NPN then you can attach the signal to input (-) and input (+) to the dc power supply +. If you have PNP you do the opposite - signal is + and - goes to the power supply.
Thanks to answer@@GBWM_CNC. I can't wait to see your new video on mounting your probe. Besides, thank you for all the videos you made, they really helped me connect the AXBBE.
I'm not sure I understood correctly, does your probe have 2 or 3 wires?
@@AgnèsNesp NPN and PNP- type sensors / probes have 3 wires (same as mine has 3 wires). The difference is when you have a NPN probe then the signal wire goes to the "-" input of your device (for example our CNC controller). If you have a PNP probe then the signal wire goes to the "+" input of your device.
Is this the best board for uccnc?
Depends what is your main criteria. I liked it a lot but the other ones should be good too if you have other needs. Check how much analog inputs / outputs, digital inputs / outputs you need. How many axes have to be controlled etc. It all depends on how complicated your machine will be. The axbb-e has 24VDC input / outputs terminals which the other models don't have - those need breakout boards from what I know. Check on cncdrive.com for more info.
Da rade podpiac wiecej silnikow krokowych poprzez ta dodtkowa plytke ?
Bez problemu.
@@GBWM_CNC
Miło to słyszeć bo chce w przyszłości dodać oscylacyjny do swojego CNC i atc
Oscylacyjny to 2 silniki na działanie + dodatkowy na z2 a atc wymaga 1
@@OnlyMadnessPain Pytanie ile to w sumie będzie osi i o jakim sterowniku mowa bo np. AXBB-E obsłuży maksymalnie 6 osi a jeżeli by to była frezarka i jeżeli dojdą 4 osie, no to wychodziłoby 7 osi (przyjmując, że to nie jest bramówka, która ma z reguły jeszcze jedną oś więcej).
@@GBWM_CNC
No właśnie axbbe
Ewentualnie mogę dać wspólne z chociaż to byłoby o tyle problematyczne że w takim przypadku będę musiał zdejmować nóż
Też inna sprawa że mogę podpiąć 2 drivery pod jedno złącze na osi y
@@GBWM_CNC
W sumie to z2 to moge dać jakiegoś switcha i podpiąć pod to samo co Z1 i ustawić że za każdym razem jak będzie outout na switcha to zeruje os do czujnika na górze
What is AXBB-E ?
Axbbe is the name of this controller
Can it work with LinuxCNC?
Sadly no. But with uccnc it works perfectly
Tromp Villages