Just ordered this for mine! Will definitely be watching again later for the installation reference. I have the LV can on mine now, but went with the full set up including the 200mm BW can. Looking forward to hearing which one I prefer. Thanks for all the great vids by the way!
Enjoying the videos! How is the bike handling after last video of suspension adjustment? I’m so torn between CB1000r vs MT10. The CB style is sexy!! Great dash display too! Price is on point too!! Big down fault for CB is no damn cruise control!! MT CP4 engine sound is crazy good! Has cruise control! MT looks department is nothing great in my eyes. Actually like the previous look better of MT10. What made you go with the CB over everything else?
Hey, the bike has been handling great, I really feel the difference. I do think that the MT10 is probably a better bike overall, and I was looking at it when I was doing my research... BUT I COULDN'T GET OVER THE LOOK lol
@@cyclevybz Glad to hear suspension changes work! I watched the video after post of cruise control addon. Any issues at all with it? Yeah I’m sure mt10 better bike but higher price too. I agree the look is a acquired taste lol.
Hi I’m thinking of the black widow downpipes to go with the l LeoVince exhaust. Did you find the remap was a must? What issues did you have before it was remapped? Did it throw any engine management lights? Thanks
I have the same bike with the same black widow exhaust. I spray painted the entire system with Matte Black high heat spray paint n it's holding up perfect since last summer.
@@cyclevybz thanks! What about after remap ? I love my slow speed throttle response . It’s the same smooth? I have also an s1000rr 2023 . A beast but I hate slow speed jerkiness, obviously this one is a racer and understandable. The smooth acceleration is what i love on Cb and i am not happy to compromise it 😁
Good taste in bikes and cars 👌🏻. Im riding an S1K and driving an E63. Looking at the CB1000R and all your vids have been great to watch. Keep it up fellow Florida bro
I am also curious about the DB rating. Currently have the LV-10 but it sounds a bit fake however doing a full system might get me in trouble which i don't fancy. xD
I have the same headers but I paired them with the Akrapovic Homologated Slip-On which really quited the bike down. The bike sounds fantastic. After getting tuned you will not be disappointed it will totally transform that bike. FYI if your getting it customed tuned on a dyno your going to need PAIR valve block off plates. If your tuner is just flashing with a tune from another bike they're not necessary
I'd get this Cerakoted Black to match & it would be chef's kiss. It's funny how you dropped damn near 19lbs off the bike weight just swapping the pipes & tip!
Hey there clean bike I’ve got the 2020 pearl white model and love going to do the headers and get a remap can’t wait. I can see you’ve put a few bits and bobs on it by evotech great stuff. I bought the quad lock bar mount like your self but wasn’t happy because it wasn’t central (my OCD lol) Evo tech do the clamp mounted quad lock system and looks awesome just thought I’d let you know thanks mark
The pearl white is a sweet scheme. The new headers with tune is going to transform the bike. Yes, the off centered phone mount bothers me too. Lol I’ll look into the evotech clamp 🙏🏾
Good choice, I went with them as well because I blew my budget. I wanted the SC headers but they wanted $2,000! The slip on alone was $1500. They do sound good. The only thing I may do next season is powder coat. Also, I cut a slit in a 17mm socket to make the o2 socket...was hard to find a 11/16. I was close to just cutting of those stupid covers!
A very methodical, easy to follow vlog Cycle Vybx. 👌EXCELLENT. I’m thinking of doing the exact same this summer. I already have the LV slip on. In the meantime, that carbon fibre cover looks just job for the standard system. Can you tell me where you got it from ? Keep up the excellent work and ride safe buddy.
That rumble and light decell pop sounds perfect you get all the benefits Of the system without out alerting the rollers two streets over.. Just a hint of aggression with with a refined Growl.. I think my license would start itching through my wallet...😬 I better stick with the bread basket and the slip on for a little while untill. I can learn how to keep it in my shorts.😂
👉🏾ECU Flash and Dyno Results - ruclips.net/video/QixVW1CabSQ/видео.html
👉🏾CB1000r All Upgrades so far - ruclips.net/video/c42wCVAIj_o/видео.html
Just ordered this for mine! Will definitely be watching again later for the installation reference. I have the LV can on mine now, but went with the full set up including the 200mm BW can. Looking forward to hearing which one I prefer. Thanks for all the great vids by the way!
Glad it was helpful! Keep us posted
WOW!!! great job , awesome bike! and great garage you got room for more bikes in there brother.
Lol, don’t tell the wife. Thanks i
How’s the headers been treating you, any leaks over time, plan on getting one bc yu can’t beat the price!
Man, I haven’t had any issues. Still sounds beautiful. They did get dark though but I would definitely recommend it.
love the video. I just had my ecu flashed and full headers done. did you ever do spark plugs?
No I haven’t. The plugs that I have are pretty new.
Enjoying the videos! How is the bike handling after last video of suspension adjustment? I’m so torn between CB1000r vs MT10. The CB style is sexy!! Great dash display too! Price is on point too!! Big down fault for CB is no damn cruise control!! MT CP4 engine sound is crazy good! Has cruise control! MT looks department is nothing great in my eyes. Actually like the previous look better of MT10. What made you go with the CB over everything else?
Hey, the bike has been handling great, I really feel the difference. I do think that the MT10 is probably a better bike overall, and I was looking at it when I was doing my research... BUT I COULDN'T GET OVER THE LOOK lol
@@cyclevybz Glad to hear suspension changes work! I watched the video after post of cruise control addon. Any issues at all with it? Yeah I’m sure mt10 better bike but higher price too. I agree the look is a acquired taste lol.
Wunderschönes Bike, wo haben sie dieses Hitzeschild gekauft?Gruss aus Deutschland
Hi I’m thinking of the black widow downpipes to go with the l LeoVince exhaust. Did you find the remap was a must? What issues did you have before it was remapped? Did it throw any engine management lights? Thanks
So, I didn’t personally notice any issues just a flat spot in 2nd gear, but I think that was always there. But I didn’t want to chance it.
I have the same bike with the same black widow exhaust. I spray painted the entire system with Matte Black high heat spray paint n it's holding up perfect since last summer.
Thanks for the information !! I was thinking about doing that as well but wondering how it would look hold up. Which paint did you use?
@@cyclevybz Rust-Oleum 248903 12-Ounce 2000 Degree, Flat Black Automotive High Heat Spray Paint.
@@hampa07One year later how is it holding up now? I’m about to install these same headers when I get the ECU back from a flash. Thanks!
Hello bro how long taking you the installation?
2 hrs give or take. It wasn’t too bad.
I watched your video and worked on it. This product is very good! And your explanation is easy to understand!
ありがとう！！
Awesome! Thank you!
Any throttle response jerkiness ? On low speed city cruising? Or power lose? I am asking because I know you need to remap it after cat out? Thanks 😊
I did the remap, but before I did, I did notice some flat spots but that’s about it
@@cyclevybz thanks! What about after remap ? I love my slow speed throttle response . It’s the same smooth? I have also an s1000rr 2023 . A beast but I hate slow speed jerkiness, obviously this one is a racer and understandable. The smooth acceleration is what i love on Cb and i am not happy to compromise it 😁
Where did you get the belly plate? Looks amazing 👏
It’s from sw motech 2022 Honda CB1000R - My Favorite Upgrade So Far
ruclips.net/video/7SlqNBkrQ5E/видео.html
@@cyclevybz Thanks
How long is shipping?. Looks like it's coming from overseas
It came from the UK, and if I remember correctly, it took about 1 1/2 weeks.
Good taste in bikes and cars 👌🏻. Im riding an S1K and driving an E63. Looking at the CB1000R and all your vids have been great to watch. Keep it up fellow Florida bro
Thank you!! Where in Florida are you?
@@cyclevybzSouthwest Florida! Whereabouts are you?
@@GoldenEagleXTND I'm in Orlando.
Are stainless steel
waht is the DB rating on this ? 100 db's ? there are apps you can get
I’ll check it out and let you know
thank you , I'm looking forward to it. @@cyclevybz
I am also curious about the DB rating. Currently have the LV-10 but it sounds a bit fake however doing a full system might get me in trouble which i don't fancy. xD
@@Celtic847 The Video is up - ruclips.net/video/Tx8G51z_WQU/видео.html
How do you go on with the warranty in the UK. It makes the warranty invalid. It you take off the cat. I'm going to have to wait one more year
Unfortunately, it's one of those things where its a risk reward.
I have the same headers but I paired them with the Akrapovic Homologated Slip-On which really quited the bike down. The bike sounds fantastic. After getting tuned you will not be disappointed it will totally transform that bike. FYI if your getting it customed tuned on a dyno your going to need PAIR valve block off plates. If your tuner is just flashing with a tune from another bike they're not necessary
Thanks, I am getting a custom tune and dyno so I’ll let the tuner know.
What is a pair valve block off plate for? I have the same exhaust and got a customs tune.
How much did you pay for the system?
The black widow exhaust headers are pretty inexpensive. I paid about 425 and that was shipped to USA. And the leo vince slip on was around 285
I'd get this Cerakoted Black to match & it would be chef's kiss. It's funny how you dropped damn near 19lbs off the bike weight just swapping the pipes & tip!
lol, yep
Hey there clean bike I’ve got the 2020 pearl white model and love going to do the headers and get a remap can’t wait.
I can see you’ve put a few bits and bobs on it by evotech great stuff.
I bought the quad lock bar mount like your self but wasn’t happy because it wasn’t central (my OCD lol)
Evo tech do the clamp mounted quad lock system and looks awesome just thought I’d let you know thanks mark
The pearl white is a sweet scheme. The new headers with tune is going to transform the bike. Yes, the off centered phone mount bothers me too. Lol I’ll look into the evotech clamp 🙏🏾
Good choice, I went with them as well because I blew my budget. I wanted the SC headers but they wanted $2,000! The slip on alone was $1500. They do sound good. The only thing I may do next season is powder coat. Also, I cut a slit in a 17mm socket to make the o2 socket...was hard to find a 11/16. I was close to just cutting of those stupid covers!
Lol, I thought about that too(powder coat)but I'm not sure how it will hold up in the heat. Sounds Amazing
Ceramic spray is better .they use it on f1 and race cars
Bike looks and sounds good my man, thanks for the video.
No problem 👍
How long did the parts take to come?
I think a week or two.
A very methodical, easy to follow vlog Cycle Vybx. 👌EXCELLENT.
I’m thinking of doing the exact same this summer. I already have the LV slip on.
In the meantime, that carbon fibre cover looks just job for the standard system.
Can you tell me where you got it from ?
Keep up the excellent work and ride safe buddy.
Thank you!! Here’s a link to the heat shield amzn.to/40Fn226
ラジエーターは、付けたまましましたか？
Yes I did
@@cyclevybz OK👍Thank you
What a beauty ❤💯
That rumble and light decell pop sounds perfect you get all the benefits Of the system without out alerting the rollers two streets over.. Just a hint of aggression with with a refined Growl.. I think my license would start itching through my wallet...😬 I better stick with the bread basket and the slip on for a little while untill. I can learn how to keep it in my shorts.😂
😂
Awesome sound bro!
Appreciate it!
Boooooooooyyyyyy she sounds good😮😮😮
Yessir!!! You now I can hear myself when I'm riding with yall. 🤣
Outstanding
Niceeee love it. I have same bike..
great vid, there are at least two zeros missing from your sub count, I can easily see you get those in notime
I appreciate that 🦾. Still grinding
Sick
Thanks bro 🦾