At 6 minutes I knew I would NEVER do this. Too old. You and your brother are amazing, I thank God you and kids like you are out there. Great video and very impressive effort. Am I doomed to just blow up my 10S Pro???
Lately it seems when I'm wondering about things your videos sum up the details thoroughly and procedurally. Love the very simple and effective way you give the information and very clear on every step. Earned a sub from me!
Excellent quality instruction. Even if you don't have a tech background you should be able to follow along and understand what you are doing. Well done.
Helpful and clear instructions, I have referenced this video several times setting up my Pad7. I have extremely limited linux experience but found no issue getting this done. Thankyou!
That`s by FAR the best production on the subject. You just nailed it without all the nonsense ego BS that 99% of 3dp youtubers fill their videos with !!!! After 4 minutes in the video I did subscribe to your channel and I am a hard earned subscriber !! Thank you !!!
This is exactly what I was looking for to help me setup multiple Klipper instances on my Manta E3EZ (+CB1). Clear, concise, and well presented. Thank you so much!
Thank you for helping me set up my Pad7 and my new Sovol SV05. I've still got to tune/tweak it, but I'm at least up and printing through the Pad7 and running Klipper firmware on my printer now. I've got a few more to convert to Klipper, a Biqu B1 SE and a Creality CR6-SE. Your video, and your other videos have been a great help in setting up and where applicable, reviews of 3D printers.
After watching your videos, i decided to upgrade my Longer LK5 Pro printer. This is my first venture into Klipper and it's quite a learning curve. I have a couple questions, all relating to Klipper, and it's implementation in a Biqu Manta M8P board, with a CB1 EEMC. I'm running TMC2209 stepper drivers, I purchased both a TFT70 and a Bigtree HDMI 70. I also took the plunge and purchased a Biqu H2 500C to be able to print flexibles and other materials. I've got the mainboard talking to the printer and thanks to your video i have the blTouch working with mesh bed leveling. Here are my questions, 1. my extruder Thermistor reads either -250C or + 250 C and doesn't track the heater. ( the heater works) I've tried sever config settings to no avail. I've reached out to biqu, but no answer yet. All the documentation is for Marlin, so it doesn't help me with Klipper. 2. I haven't been able to get either screen to work. THe TFT screen displays a menu but says can't connect to printer. The HDMI 70 turns on, but nothing displays I'm kind of at a standstill and I would appreciate any help you could provide. Thanks in advance, and please keep those Klipper videos coming!!! Dave
Thanks for the video! I wouldn't have been able to figure this out by myself. I had to just keep the serial for the printer instead of setting up each usb port for some reason. I can plug into any of the 3 ports and it still connects my printer.
I came back after a chat with Tiny Machines because they recommended the Pad 7 for my 10S Pro as a update for reliability and speed enhancements. I so wadded through your video. I am amazed at the depth of your broad knowledge. Tiny Machine will provide on line setup support which would be required. this level of integration is beyond my patience. I need to design and print. So i ask you, would the Pad 7 for my one 10S Pro Printer provide the extra capability and set the machine up for Linear rails and faster Hot End. Thanks for all you guys for the cause. Dennis
Could you make a more detailed video on exactly how much did the linear rails upgrade on a Klipperized bedslinger contributed to the increase of speed and acceleration compared to running Klipper on a stock printer with POM wheels? I couldn't find a definitive conclusion anywhere on whether it is worth upgrading to linear rails at all if input shaping is already working. Especially Hiwin rails.
As long as it's still a bed slinger, I can't see how linear rails would contribute much to the speed. They simply run a little smoother and won't wear down like POM wheels. In my opinion, it may not worth getting Hiwin rails on a printer like that.
Not sure you mentioned the Pad 7 can be upgraded up to 8GB of Ram by swapping out the CB1 with the Raspberry Pi Compute Module 4 if you did sorry I missed it, great video tutorial!
Great video as usual. Can you share the stl files (fan mount, crtouch mount etc) of the biqu light. Thank you. H2v2s upgrade video would be great too. Thank you.
@@willngton I have the Sonic Pad and don't like Creality because it's close source but I can also control 4 printers or 3 printers and a camera. I can't find any documentation on how many printers and cameras I can control with the PAD7.
Thanks a lot. Cool video. I really liked it and it helped me understand BTT PAD 7. I enjoyed watching a few more videos and of course I immediately subscribed. I have certain difficulties with writing cfg files. I see you were asked to give your files to Ender. I would be very grateful if you post them and provide a download link. There really isn't enough to understand it better. Thanks for your great work.
So I have tried a few times now to install several instances and it does not work. As soon as I remove all the options in Kiauh and install them back when I try to reboot the pad it will no longer reboot in klipper screen. I even tried to not remove klipper screen and just remove and install 2 instances of klipper and moonraker. Either way I can't. And then I am forced to install the CB1 OS all over again and it is a long process. Is anyone else having these issues? I have seen some complaints online about things after the last few updates. I am running out of ideas and have had to reinstall everything close to 10 times now. How are we supposed to get more than 1 instance? I have followed this video and a few others to the letter and keep getting the same results each time. The pad won't boot up . I also ran into this on a raspberry pi as well. I can install one instance no problem but as soon as I remove everything and installing it back on the bad won't reboot again into klipper screen. And I am also not able to SSH back in .
Great video! Have you had any negative effects from using the “real” version of Klipper screen vs the BTT version ? The docs say BTT made their own version for the haptic feedback.
Oh... Yes, I didn't realize that the touch feedback was gone with the 'real' KlipperScreen. But that's fine, I would rather use the 'real' one that I can keep updating as the latest version :)
@@AuroraTech I find the touch feedback annoying, glad to hear everything else is working, I’ll change to the “real” version also when I change mine to have multiple instances. Thanks for the detailed video!
Can you please show us how to get multiple printers to show up on btt pad 7 after latest klipper Update, I had it working fine before but now I can only access printer 2 and 3 through web interface. No option to select printers anymore.
It is priced similarly to the BTT CB1, but it does not have WiFi on board. Instead, you have to use a USB WiFi adapter which occupies a port. Therefore, I would prefer to save that port for another 3D printer.
host names do not work for me. i have to use ip addresses instead. i am not sure why but i am leaning toward my home network settings for my new mesh router. not a big issue as it still connects to them.
Am I missing something? I’m trying to flash Klipper on to the Ender 3 with the 4.2.7 board and you said common printers you could find the firmware online. I have looked. I don’t see it. Printer config yes I would agree firmware not so much.
Thank you and your brother for a great video. I am under the impression that the CB1 is installed in the PAD7 when purchased. Is it possible to perform this process of multiple printer installs without the Raspberry Pi?
Hello Aurora Tech, I have after some help and re-watching your and others help videos at last got the Pad 7 to log into my browser and now see the Klipper system on it. Now the real fun begins, I have a Elegoo Neptune 3 Max I wish to control using the Pad 7 system through the Browser, where do I get the Files needed to do so? I need two it seems? so the klipper runs on the printer it's self and the other file to control that by the browser or the pad 7 directly. I have a Elegoo Neptune 3 that I also will be adding to the system as I have it working! So how and where do I get the files needed? Thank you for your help.
Thanks for the great video.. If you have 3 printer setup on the Pad7, can you also connect 3 webcams for each printer via USB hub? Will this automatically work or needs further setup? Thanks
I have a Kingroon KP3S Pro S1 printer and a SonicPad. Unfortunately, I cannot get the sonicpad to work with this printer. Maybe you can check? I can possibly buy BTT7, but I don't know anything about Linux. Do you know if there is any BTT7+KP3S Pro S1 tutorial? One for a novice. Regards.
is nobody mentioning the overvolting of 30XX series GPU's on gigabyte X570 boards with stock settings? I went through 3x motherboard replacements until I complete switched to another brand motherboard.
Hei Aurora, thanks for the video. I want to take a BTT pi v1.2 and i want to ask how to make the calibration of accelerometer from the browser. I don't know if i should take the pad 7 or just the pi. I have an ipad 7th generation, and i think will work better as a display for me. How babysteps should work when you upgrade to klipper? Regards, Alex :)
Aurora I used your USB port serial ids but my pad7 is moving the printers to different ports after reboots... unplugging the side port says ch341 2-1.4:1.0: device disconnected
I have followed step by step and I can't get to show me more than one printer on the screen. The new icon appears, but with only one printer. I don't know what to do...
can someone provide the original printer config file that comes with the Pad 7, I wrote over the existing one and lost the sensor information for the pad7 built in heat probe information, thanks in advance
Thanks for your videos they help a lot. I just got a Manta M8P V2.0 board with TMC5610. I have a Pad 7. I followed your video and everything went fine except it will not connect, I get mcu 'mcu' Unable to connect. When I run ls /dev/serial/by-path it shows the right port: platform-5200000.usb-usb-0:1.2:1.0-port0. On the boar next to the USB C is a switch that according to the diagram switch between USB-OTG and UART to USB, I only get a port when it is in (I think. The white square on the diagram is to the right, closed to the edge of the board) USB-OTG. I also see a dip switch block with 4 switch marked: eeprom-WP NEXTRST RPI_BOOT USB-OTG Could it be that I have to set one of those? I have tried with different USB cables, they works to communicate with Android phones and tablet, when I write code and use them as debugging device. Thanks for any help.
Hey Aurora Great and very detailed Video 👍 Did you think that the Pad7 could also used for the Twotrees sapphire plus v1 (with Z-Axis belt) to work there with Klipper? Thanks for your Time Greatings from Austria Peter
@@AuroraTech thanks a lot Im 60 years old and be sure that the Future would be Great with Young People like you! Dont let you bring down! Make your Thing - the Future is yours
The advantage IMO of the Pad 7 is that it uses stock vanilla Klipper and Mainsail, why Creality decided to butcher Klipper with its own fork is beyond me, Creality has a track record of releasing bad software, hell they cant even configuire Marlin correctly, so why they decided not to use stock Klipper that is a proven firmware that receives regular updates and would not need any programming and the costs that incurs was a bad choice IMO. I myself have previously used a RPi 3B+ and touchscreen to run bothe Klipper and Octoprint but have now changed to Orange Pi Zero 2 + USB expansion and the same 7" touchscreen to free up the Rpi for another project, total cost £83
take a doubt. I have a btt-pi v1.2, which is the CB1, when I put klipper on the sovol sv-06, via kiauh and install more than one instance, the sv06 doesn't work. it only connects if it has 1 instance and no name. so, by default, the printer is printer_data. Can you do this test on pad7 and sv06, with more than 1 instance and naming each one of them?
ive followed your tutorial but when it comes the input shaping im not seeing that option on my pad7 is there extra settings that need to be done so this comes up on the screen?
I have 3 CB1 controlled printers and only one of them seems to work reliably. The other two spit out errors that don't even get me a useful google result. I've decided I will be eating the price of a real raspberry pi next time.
Just try using the latest OS image. I also have three CB1(including the Pad 7). They are all running simultaneously without any issues. They are controlling 4, 3, and 2 printers, respectively.
I"m a newbie here, do u have a video like this for the anycubic kobra 2 pro. I have installed klipper on it and can"t get it to work. I have looked for videos on kobra but everything I find is for other printers... can U help...
Question: Would you mind providing the configuration info for the input shaper and adxl345? I tried to read and copy the brief screen shot of your printer.cfg file that was shown on the video but it does not work. Perhaps I miss read it because it is not too clear. It will not boot due to an "unable to open spi device" error. Thank you for the informative video. I'm new to Klipper and this video helped me get it running with only the issue of getting the input shaper configuration setup. Excellent results considering this is my first attempt at using Klipper! Thank you again.
@@AuroraTech thank you for your prompt response, I did copy these lines and still get this error: "MCU 'rpi' error during config: Unable to open spi device" I've read many similar posts on the web about this error but none relate to the Pad 7. I think this product is too new to have much feedback. The only thing I can add is that the green LED on the adxl is on. I assume that means the cable is good. I will do a continuity check on it to verify that. Do you have any ideas as to where I have gone wrong?
the btt pad7 is so bad, i had one and it legit was lose connecting to my network every hour and i would have to turn the pad off and on 40-60 times just for it to find my network again
Nowadays I just run klipper on my old android phone. 0 cost + screen + camera all in one🎉
I've got a few old android phones that I would like to do this with for the exact same reason.
Now Auora needs to do a Android Tablet Klipper hack build video!
Octo4a is best on samsung smartphone, in other hand in umidigi and LG I have a lots of problems
At 6 minutes I knew I would NEVER do this. Too old. You and your brother are amazing, I thank God you and kids like you are out there. Great video and very impressive effort. Am I doomed to just blow up my 10S Pro???
hahha i felt the same way i just use the sonic pad its just much more user friendly
This is one of the best tutorials on how to control/install multiple printers from one control board(rg. raspberry pi). Great video!
Lately it seems when I'm wondering about things your videos sum up the details thoroughly and procedurally. Love the very simple and effective way you give the information and very clear on every step. Earned a sub from me!
Editing tip for your brilliant brother: instead muting audio for pauses insert pre-recorded silent room noise. This avoids noticable audio breaks.
Oohh... I like this idea.
Thank you for this video .
It will help many folks with PAD7
Much appreciated!
Excellent quality instruction. Even if you don't have a tech background you should be able to follow along and understand what you are doing. Well done.
Helpful and clear instructions, I have referenced this video several times setting up my Pad7.
I have extremely limited linux experience but found no issue getting this done. Thankyou!
That`s by FAR the best production on the subject. You just nailed it without all the nonsense ego BS that 99% of 3dp youtubers fill their videos with !!!! After 4 minutes in the video I did subscribe to your channel and I am a hard earned subscriber !! Thank you !!!
This is exactly what I was looking for to help me setup multiple Klipper instances on my Manta E3EZ (+CB1). Clear, concise, and well presented. Thank you so much!
I laughed at the post-credit "elevation" scene! :D Excellent tutorial and very well presented, as always.
Thank you for helping me set up my Pad7 and my new Sovol SV05. I've still got to tune/tweak it, but I'm at least up and printing through the Pad7 and running Klipper firmware on my printer now. I've got a few more to convert to Klipper, a Biqu B1 SE and a Creality CR6-SE. Your video, and your other videos have been a great help in setting up and where applicable, reviews of 3D printers.
As always you both provide the best reviews and very informative.
WOW!!! Another great video. Thank you and your brother for the great content.
You rock! With your help I was able to set up klipperscreen for 2 instances on a surface go!
After watching your videos, i decided to upgrade my Longer LK5 Pro printer. This is my first venture into Klipper and it's quite a learning curve.
I have a couple questions, all relating to Klipper, and it's implementation in a Biqu Manta M8P board, with a CB1 EEMC. I'm running TMC2209 stepper drivers, I purchased both a TFT70 and a Bigtree HDMI 70. I also took the plunge and purchased a Biqu H2 500C to be able to print flexibles and other materials. I've got the mainboard talking to the printer and thanks to your video i have the blTouch working with mesh bed leveling.
Here are my questions,
1. my extruder Thermistor reads either -250C or + 250 C and doesn't track the heater. ( the heater works) I've tried sever config settings to no avail. I've reached out to biqu, but no answer yet. All the documentation is for Marlin, so it doesn't help me with Klipper.
2. I haven't been able to get either screen to work. THe TFT screen displays a menu but says can't connect to printer. The HDMI 70 turns on, but nothing displays
I'm kind of at a standstill and I would appreciate any help you could provide.
Thanks in advance, and please keep those Klipper videos coming!!!
Dave
Thank you! I recently started building a small printer farm and I've been looking for a tutorial to cover this exact topic.
Great video and instruction. Much appreciated!
mais um iscrito finalmente alguém que ensinou a fazer certo.
Awesome setup video, considering BTT pad7 for my printers 😊. Thanks for making n sharing this video ❤
Your videos are awesome. Thank you.
I like your fluent zooming voice .Very pleasant to listen to .Just saying ;)
Congratulations for the excellent work, with these videos you help many people all over the world !!! Thanks!!!
Thanks for the video! I wouldn't have been able to figure this out by myself. I had to just keep the serial for the printer instead of setting up each usb port for some reason. I can plug into any of the 3 ports and it still connects my printer.
I came back after a chat with Tiny Machines because they recommended the Pad 7 for my 10S Pro as a update for reliability and speed enhancements. I so wadded through your video. I am amazed at the depth of your broad knowledge. Tiny Machine will provide on line setup support which would be required. this level of integration is beyond my patience. I need to design and print. So i ask you, would the Pad 7 for my one 10S Pro Printer provide the extra capability and set the machine up for Linear rails and faster Hot End. Thanks for all you guys for the cause. Dennis
Thanks for the very detailed info! Could you make a video on how to add web cams to the pad 7?
This helped me on the accelerometer, thank you!
This video helped me soooooooo much. Thank you for the easy to follow steps.
Awesome video. Can you please do an instruction video on installing Klipper on BTT Pad 7 for the Eleego Neptune 3 Max? Thank you very much.
Could you make a more detailed video on exactly how much did the linear rails upgrade on a Klipperized bedslinger contributed to the increase of speed and acceleration compared to running Klipper on a stock printer with POM wheels? I couldn't find a definitive conclusion anywhere on whether it is worth upgrading to linear rails at all if input shaping is already working. Especially Hiwin rails.
As long as it's still a bed slinger, I can't see how linear rails would contribute much to the speed. They simply run a little smoother and won't wear down like POM wheels. In my opinion, it may not worth getting Hiwin rails on a printer like that.
21:48 Ender 3 Neo: "I am a HUGE Aurora's Fan"
We missed you ❤
Thank you!
Not sure you mentioned the Pad 7 can be upgraded up to 8GB of Ram by swapping out the CB1 with the Raspberry Pi Compute Module 4 if you did sorry I missed it, great video tutorial!
H2 v2s Lite. Yes please, do a video describing your upgrade.
Great video!
Great video as usual. Can you share the stl files (fan mount, crtouch mount etc) of the biqu light. Thank you. H2v2s upgrade video would be great too. Thank you.
Would love to see a Pad 7 vs Sonic Pad to see which one would be a better choice.
PAD7 seems to be much better and flexible, Sonic PAD is close source
@@willngton I have the Sonic Pad and don't like Creality because it's close source but I can also control 4 printers or 3 printers and a camera. I can't find any documentation on how many printers and cameras I can control with the PAD7.
@@georgedunn7573 3 out of the box.
Thanks!
Thanks a lot. Cool video. I really liked it and it helped me understand BTT PAD 7. I enjoyed watching a few more videos and of course I immediately subscribed. I have certain difficulties with writing cfg files. I see you were asked to give your files to Ender. I would be very grateful if you post them and provide a download link. There really isn't enough to understand it better. Thanks for your great work.
So I have tried a few times now to install several instances and it does not work. As soon as I remove all the options in Kiauh and install them back when I try to reboot the pad it will no longer reboot in klipper screen. I even tried to not remove klipper screen and just remove and install 2 instances of klipper and moonraker. Either way I can't. And then I am forced to install the CB1 OS all over again and it is a long process. Is anyone else having these issues? I have seen some complaints online about things after the last few updates. I am running out of ideas and have had to reinstall everything close to 10 times now. How are we supposed to get more than 1 instance? I have followed this video and a few others to the letter and keep getting the same results each time. The pad won't boot up . I also ran into this on a raspberry pi as well. I can install one instance no problem but as soon as I remove everything and installing it back on the bad won't reboot again into klipper screen. And I am also not able to SSH back in .
Outstanding
Hey @auroatech - any fix for the recent updates to Klipper that breaks the KlipperScreen.conf to display the instance switch button on the BTT Pad7?
super vidéo merci
Thanks
I'd like to heard about the H2 V2S. I going with the Revo version but I'm sure it close enough.
Great video!
Anyone know where to find the klipper.bin file for a 4.2.7 board on a CR10?
@auroratech Great video just sucks you didnt put the commands in the description
i keep gettings a CORS error when trying to add 2nd printer to fluidd. did the setup directly as instructed.
Great video! Have you had any negative effects from using the “real” version of Klipper screen vs the BTT version ? The docs say BTT made their own version for the haptic feedback.
Oh... Yes, I didn't realize that the touch feedback was gone with the 'real' KlipperScreen. But that's fine, I would rather use the 'real' one that I can keep updating as the latest version :)
@@AuroraTech I find the touch feedback annoying, glad to hear everything else is working, I’ll change to the “real” version also when I change mine to have multiple instances. Thanks for the detailed video!
Can you please show us how to get multiple printers to show up on btt pad 7 after latest klipper Update, I had it working fine before but now I can only access printer 2 and 3 through web interface. No option to select printers anymore.
Would love a comparison of running Klipper on something like the Libre Le Potato compared to CB1.
It is priced similarly to the BTT CB1, but it does not have WiFi on board. Instead, you have to use a USB WiFi adapter which occupies a port. Therefore, I would prefer to save that port for another 3D printer.
host names do not work for me. i have to use ip addresses instead. i am not sure why but i am leaning toward my home network settings for my new mesh router. not a big issue as it still connects to them.
Am I missing something? I’m trying to flash Klipper on to the Ender 3 with the 4.2.7 board and you said common printers you could find the firmware online. I have looked. I don’t see it. Printer config yes I would agree firmware not so much.
Thank you and your brother for a great video. I am under the impression that the CB1 is installed in the PAD7 when purchased. Is it possible to perform this process of multiple printer installs without the Raspberry Pi?
Hello Aurora Tech, I have after some help and re-watching your and others help videos at last got the Pad 7 to log into my browser and now see the Klipper system on it.
Now the real fun begins, I have a Elegoo Neptune 3 Max I wish to control using the Pad 7 system through the Browser, where do I get the Files needed to do so?
I need two it seems? so the klipper runs on the printer it's self and the other file to control that by the browser or the pad 7 directly.
I have a Elegoo Neptune 3 that I also will be adding to the system as I have it working! So how and where do I get the files needed?
Thank you for your help.
Thanks for the great video.. If you have 3 printer setup on the Pad7, can you also connect 3 webcams for each printer via USB hub? Will this automatically work or needs further setup? Thanks
please do a video about ERCF on none voron printers
Great Video! How can I get your printer.cfg file?
I am lost on how to set it up for my Bigtreetech B1 SE Plus
Is this the same process to installing klipper on a raspberry pi 3b+ on my ender 5 plus
can you post your printer.cfg file for the enders
i followed this step by step and i cant get it to give me the button to switch between printers
Where is the printer code you use @ 12:38 @aurora? The printer.cfg code does not match on screen as seen in the github site. Any thoughts?
thnx 👍
I have a Kingroon KP3S Pro S1 printer and a SonicPad. Unfortunately, I cannot get the sonicpad to work with this printer. Maybe you can check?
I can possibly buy BTT7, but I don't know anything about Linux. Do you know if there is any BTT7+KP3S Pro S1 tutorial? One for a novice. Regards.
Help please for Connect speederpad in the Manta M8P without CB1 using speederpad with klipper, is posible? In what Port Connect in manta Mp8?
does anyone know how to add the input shaping screen to the pad 7? ive searched and searched and cant find anything
is nobody mentioning the overvolting of 30XX series GPU's on gigabyte X570 boards with stock settings? I went through 3x motherboard replacements until I complete switched to another brand motherboard.
How did you quickly comment things out when editing the cfg files?
I'd like to hear your thoughts on the h2v2 lite extruder thanks!
Hei Aurora, thanks for the video. I want to take a BTT pi v1.2 and i want to ask how to make the calibration of accelerometer from the browser. I don't know if i should take the pad 7 or just the pi. I have an ipad 7th generation, and i think will work better as a display for me. How babysteps should work when you upgrade to klipper?
Regards, Alex :)
hello there, how can i change the time on the pad 7? i change the to europe/berlin but on the pad´s time is 2 hour behind my time. can u help me?
Aurora I used your USB port serial ids but my pad7 is moving the printers to different ports after reboots... unplugging the side port says ch341 2-1.4:1.0: device disconnected
I have followed step by step and I can't get to show me more than one printer on the screen. The new icon appears, but with only one printer. I don't know what to do...
ok I found the solution in another video. The right path for the KlipperScreen.conf is: ~/printer_data/config
hi, how can I get orcaslicer to handle multi-instance? please
can someone provide the original printer config file that comes with the Pad 7, I wrote over the existing one and lost the sensor information for the pad7 built in heat probe information, thanks in advance
Thanks for your videos they help a lot. I just got a Manta M8P V2.0 board with TMC5610.
I have a Pad 7.
I followed your video and everything went fine except it will not connect, I get mcu 'mcu' Unable to connect. When I run ls /dev/serial/by-path it shows the right port: platform-5200000.usb-usb-0:1.2:1.0-port0.
On the boar next to the USB C is a switch that according to the diagram switch between USB-OTG and UART to USB, I only get a port when it is in (I think. The white square on the diagram is to the right, closed to the edge of the board) USB-OTG.
I also see a dip switch block with 4 switch marked:
eeprom-WP
NEXTRST
RPI_BOOT
USB-OTG
Could it be that I have to set one of those?
I have tried with different USB cables, they works to communicate with Android phones and tablet, when I write code and use them as debugging device.
Thanks for any help.
where you able to resolve your issue? I am having the same problem
help please I don't have a input shaper option on my pad 7 ?
Did you just copy over your input shaper results from a prior run, or are you planning on adding accelerometers to each printer?
Hey! Great Vid, although I can't find BTT pad 7 klipper config, can you share yours?
Please share your Fluid Macros. Load and unload is not working for me.=(
Make a video of bq extruder please! How could I configure a fokoos Odín 5 to run klipper?
Aurora, we need a DIY of linear rails upgrade, could you help us?
Hey Aurora
Great and very detailed Video 👍
Did you think that the Pad7 could also used for the Twotrees sapphire plus v1 (with Z-Axis belt) to work there with Klipper?
Thanks for your Time
Greatings from Austria
Peter
As the Sapphire plus v1 is using the MKS robin nano motherboard, so, it should just work with Klipper like other machines with the same motherboard.
@@AuroraTech thanks a lot
Im 60 years old and be sure that the Future would be Great with Young People like you!
Dont let you bring down!
Make your Thing - the Future is yours
The advantage IMO of the Pad 7 is that it uses stock vanilla Klipper and Mainsail, why Creality decided to butcher Klipper with its own fork is beyond me, Creality has a track record of releasing bad software, hell they cant even configuire Marlin correctly, so why they decided not to use stock Klipper that is a proven firmware that receives regular updates and would not need any programming and the costs that incurs was a bad choice IMO.
I myself have previously used a RPi 3B+ and touchscreen to run bothe Klipper and Octoprint but have now changed to Orange Pi Zero 2 + USB expansion and the same 7" touchscreen to free up the Rpi for another project, total cost £83
take a doubt. I have a btt-pi v1.2, which is the CB1, when I put klipper on the sovol sv-06, via kiauh and install more than one instance, the sv06 doesn't work. it only connects if it has 1 instance and no name. so, by default, the printer is printer_data.
Can you do this test on pad7 and sv06, with more than 1 instance and naming each one of them?
ive followed your tutorial but when it comes the input shaping im not seeing that option on my pad7 is there extra settings that need to be done so this comes up on the screen?
Wow 🤩 so BTT finally got its own Klipper hardware. Can we still use raspberry pi to work with pad7?
You don't need the RPI anymore, Pad7 built-in CB1 which is a RPI replacement board.
@@AuroraTech wow thanks ! so just plug & play. 🤩
Does this work with the anycubic kobra 2?
I have 3 CB1 controlled printers and only one of them seems to work reliably. The other two spit out errors that don't even get me a useful google result. I've decided I will be eating the price of a real raspberry pi next time.
Just try using the latest OS image. I also have three CB1(including the Pad 7). They are all running simultaneously without any issues. They are controlling 4, 3, and 2 printers, respectively.
I"m a newbie here, do u have a video like this for the anycubic kobra 2 pro. I have installed klipper on it and can"t get it to work. I have looked for videos on kobra but everything I find is for other printers... can U help...
I don't see a reason why Klipper should not work on the Kobra 2 Pro.
👍🏻👍🏻
have you tried to run pad 7 with cm4 emmc?
I love you
❤
Question: Would you mind providing the configuration info for the input shaper and adxl345? I tried to read and copy the brief screen shot of your printer.cfg file that was shown on the video but it does not work. Perhaps I miss read it because it is not too clear. It will not boot due to an "unable to open spi device" error.
Thank you for the informative video. I'm new to Klipper and this video helped me get it running with only the issue of getting the input shaper configuration setup. Excellent results considering this is my first attempt at using Klipper! Thank you again.
Here you are:
[mcu rpi]
serial: /tmp/klipper_host_mcu
[adxl345]
cs_pin: rpi:None
spi_speed: 2000000
# spi_bus: spidev2.0
spi_bus: spidev1.1
[resonance_tester]
accel_chip: adxl345
accel_per_hz: 70
probe_points:
120,120,10
@@AuroraTech thank you for your prompt response,
I did copy these lines and still get this error:
"MCU 'rpi' error during config: Unable to open spi device"
I've read many similar posts on the web about this error but none relate to the Pad 7. I think this product is too new to have much feedback.
The only thing I can add is that the green LED on the adxl is on. I assume that means the cable is good. I will do a continuity check on it to verify that.
Do you have any ideas as to where I have gone wrong?
@@AuroraTech I'm stuck at this step. I keep getting errors.
Anyone know how to get the KlipperScreen theme to change Per printer?
Can you test klipper on sovol sv06 and sv06 plus? many thanks :)
hello where can I get your printer config filer with cr touch for 4.2.2 board?
the btt pad7 is so bad, i had one and it legit was lose connecting to my network every hour and i would have to turn the pad off and on 40-60 times just for it to find my network again