Test Flight Power Pod Genteel Lady
HTML-код
- Опубликовано: 7 сен 2024
- Test Flight Power Pod Genteel Lady
Couldn't gone any better really
www.angelwingd...
Please note colours may vary.
Can be used on a range of mini gliders around 175 - 300g weight.
Specifically developed for our 1200mm Span Genteel Lady kit.
3D printed electric power pod in an slightly unusual pusher configuration.
The pusher system allows for a small folding propeller to be used without the risk of it snagging on the motor pylon. Curvature on the base plate designed to fit against the leading edge of an AG25 wing section.
For added convenience on our own models we leave the esc in the fuselage of the aircraft, doubling as a BEC to power the RX and servos in pure glider mode without the pod fitted. A pair of 3pin JTXH connectors (like used on a lipo balance plug) proved ideal for the task. Look out for the how to videos on Nick Chitty Flying over on RUclips.
The motor leads can be routed internally and pass through a small hole at the front of the pylon. The motor mount itself allows for some adjustment of the thrust line. We suggest that you just spot glue the mount initially and make adjustments if required.
The amount of up thrust needed will vary from model to model and the CG can also have an impact upon this.
Supplied either as lightweight 3D printed pylon and separate motor mount or as a
downloadable file for use with most filament 3D printers. - Хобби
Thank you Nick, just about to start covering mine, looking forward to the long summer nights with the Lady
It’s a cracking combo buddy bungee next
@@NickChittyFlying I already saw that video but my English is not good. Could you put your answer in writing so I can translate it... or if you put it in Spanish, much better... thank you
great topic, thanks 👍
Pleasure bungee trials next
Thank you
Pleasure you still playing cigar box guitar 😍
Very cool! 🤩
Thanks Prehaps gives you an idea the music I need 🤣 can’t believe your still on that boat 😍
hi nick, only 5 days left and back to reality, we can write a soundtrack for your video, will send it on in a couple of days
@@CeltauraMusic no worries enjoy the last few days
I have one of these, the plans were bought in about 1980. Made 2 really good gliders. (Edited: Actually the older Gentle Lady, not this version of yours)
Brilliant this is 1:2 metre span version
@@NickChittyFlyingYes, I think mine is a cm or two under 2m. it was designed for the old heavy servos up in the nose, so tail heavy. A redesign is a great idea.
sweeet vid dood . nice pod
Thanks mate
Good job
Perfect nice glider
ruclips.net/video/2rqUsKqxBwE/видео.htmlsi=9KJcPywi-CFbEuYK
Splendid! This a game changer for flat-earthers.
Was there any coupling of elevator input as power applied?
Realized the pod is not designed for the Dune Freak, but wondering it won't freak at trying a go?
That’s exactly what I am going to do Dune freak 👌
No presets on launch 😍
♥👍👍
Hello, your Mini Lady is now gliding beautifully, even better in weather with cumulus clouds. Please let me know how the engine is tilted. What are the degrees of inclination down and to the side? If sideways, how many degrees and which side?✈✈✈✈✈✈✈
ruclips.net/video/zCNeZCgKq6Q/видео.htmlsi=P6hLQHZJcolxonV8
NO RESPONSE, CAPTAIN
@@NickChittyFlying I've been here before and I understand that there were no changes in engine deflection after the test flights. Thanks again and great thermals!!!
hey mate wered ya get all that hair😋 seriously that ladys a sweet flyer! have seen kits for that model but am getting lazy in my years and wishing an ARF came along.............
@@Danburdick-lm5xt they build to order buddy 😍👌
Question 4 ya.
I understand "launch bungee line"
Is made to for glider up in the air.
Wouldn't also get majority of my rc planes up as well?
Have you tried regular powered rc planes on this bungee line device?
Sometimes my hand launches don't tien out as expected & nose dive many times.
Mostly due to a bad hand launch or incorrect angle.
Too high angle & stalls. Erc.
@@Mikinct yep I have friend who launch’s from a small ramp mate
Where do i get myself a new head of hair? 🤣
Amazon mate 😂
You don’t need hair for that. Just buy your Gentle Lady.
Turkey
@@Friendroid 🤣
Looks and behaves great! Is the STL available for us home printers ?
Yes mate follow the link to web site
@@NickChittyFlying That is perfect, I’ll give it a go 👌
Look for "Download the mesh files", it's an OBJ file, not STL.
Swit