3D AutoCAD practice drawing
HTML-код
- Опубликовано: 3 ноя 2016
- Download the free AutoCAD practice drawing eBook containing the fully dimensioned drawing used in this video here: sourcecad.com/...
In this video, I have explained the method of making a 3D valve drawing in AutoCAD.
Download the free AutoCAD practice drawing eBook containing the fully dimensioned drawing used in this video here: sourcecad.com/autocad-practice-drawings-with-pdf-ebook/
Challenge 😎
---------------------
🗣️ Can you draw a circle using rectangle command in the AutoCAD?
You Don't know?😱
Go now and Watch this video how to draw a circle using rectangle command.
ruclips.net/video/2E1LVYNu0f0/видео.html
Thank you so much bro, you are a saviour 🥺 !!! I was tired searching for how to remove that intersecting part of one pipe inside another pipe. But I didn't have any idea that it is done through slicing process, and luckily I found your video. Now, I can complete my project bcoz of u. ❤
O.M.G, Most satisfying video explanation. Good work big brother it really gives the light to ones knowledge.
Excellent! I will recommend your channel to everyone who will desire to learn AutoCAD. In Shaa ALLAH.
Cannot believe how easy this was. You know how to tutor. Thank you very much. I subscribed.
Thanks Johann
You are an absolute legend, this is exactly what I needed to know. Thank you!
how nice it is..... thank you coz through this I was able to get more techniques and learn a lot...God bless you always!!!!!
I would say You are a great guy and your videos are rich with knowledge n techniques so THANK YOU SO MUCH for your efforts and Always I look for your videos
Thanks again
good
Its a cool vid. In the beginning you say the units don't matter and use the "default" however everyone's computer isn't set up the same. I opened Autocad and spent 15 mins trying to get past the first line because it went so far off the drawing surface that I couldn't see it or scroll out far enough (because it was 150 'units'). Maybe if we had started with setting up the units I could have made it through more than 1:06 of the video. Sucks because I really need the 3D practice. Thanks for sharing your knowledge. I will check out one of your other ones and see if I can follow it.
You guys are the best, just keep on with the good work. We love your engineering knowledge, thanks.
Most helpful cad video I have seen, thank you for making it! You are providing a great service.
The most simple tutorial i watched ..👍👍👍👍Thanx a lot
initially I took more time to understand this slice cmmnd. finally I've learned.but I won't be forgotten. thanks bro.
Very clear instructions, just what I was looking for to start with.
Thank you so much and shall practice all the 3D video you made it. Wish you be more and more successful🤩
The best of all 3D concerning Coordinate systems , handling views and dealing with the slice command; actually it is a package 3D tutorial.
Great tutorial and I'm looking forward to learning more 3D.
very nice, I would like to learn much more mainly about all modify tools & commands in easy way to use
Thank you for explaining, GBU
Excelent this video!.. this was my first drawing in autocad i was able to do. Thank you!
Hi Jay, another master class from the master CAD himself. Look forward to more tutorials in both 3D and 2D.
Thanks Songoku :)
Thank you so so so much.... I just needed the idea of creating a surface to slice two intersecting cones. I learnt so many things just from this video. I am modelling my project in abaqus and the modelling environment is so unnecessarily complex. Hence I need to use a more friendly software like autocad 3D before exporting and analysing. I am glad to have seen your video. Thanks Again!!!!
thanks sir, I am a beginner in this field ,very useful and your video give me a confidence
When I use prespull for circles at 6.59 min it becomes totally solid but in your video it Hollow
What I'm missing
It is very helpful for learner please update more video s thanks for your clear explanation
Thanks a lot! This will be my final work for school.
Challenge 😎
---------------------
🗣️ Can you draw a circle using rectangle command in the AutoCAD?
You Don't know?😱
Go now and Watch this video how to draw a circle using rectangle command.
ruclips.net/video/2E1LVYNu0f0/видео.html
Thanks for the video, helped me alot.
I'm new to 3D designing in CAD.
Thank u again,, each video is very useful& clear
Clear and concise. Excellent!
Thank you Sir, excellent training video.
This really helped me understand how to orientate the UCS and develop geometry relevant to an obect and also how to trim intersecting hollow objects.
Suscribed😁
such a lovely video.. Understood clearly
Thank you, bro, you are the genius
Wow, it is amazing what you have done in such a short time here...
Thank you so much and GOD bless
You are the best, I love your voice
Very clear instructions. It is great! Thanks
Some videos of typical model here:
ruclips.net/video/-XfBeywzl-0/видео.html
sir thanks a lot for this tutorial videos..it helps me a lot in developing my drawing skills..hope to see more tutorials from you.more power to you sir..
It was really helpful...thank you verymuch
Very nicely explained - thanks a lot.
I'm happy to see your tutorial. Thanks to do this type of project. and make us another video.
I have completed this figure on CAD 2021 and it actually worked, though I had to go back many times to his given command. A lot of the commands he did is errorneous in the new version of the program.
Sir,This is the very good video and very useful to all.Please send more videos of new one .Thanking you sir
Thanks Vinayak. I will try to increase the frequency of uploads on SourceCAD.
please increase the volume friend, thank you for the excellent tutorial though
Very well explained, thank you for sharing your knowledge.
very good tutorial , thanks
The last triangle 📐 doesn't fix exactly on the right pipe , it fix in straight way. Where as in diagram it fix perfect(tilt manner)
Hi.Its been very long time waiting for your video. Your videos are very useful and very good.
Hi. I can't do the copy(7:30) like you . When I see Z axis and type 138, it gives me wrong result. I had to activate Ortho mode to get there. Can you tell me why ?
AWESOME TUTORIAL !!!!!!
Its a great pleasure to have you on RUclips, but am new to 3D Modelling, can you please share with me those very first tutorials for beginners like may be the introduction to 2D or 3D Modelling. Thanks.
Hi, thanks for the tutorial video, it is really helpful for beginners like me!
quite fast for beginner like me, but im amazed how u operate all the commands.
very good work >> txs..
Thanks Mohammed
very nice tutorial
Nice work. Good tutorial!
Most Satisfying video.
Sir,This is very good video .Please send more videos of new one .Thanking you sir
Thank you
Great Tutorial bhai.
Thankyou, you for another excellent u tube video. Could you please include the 2D drawing for your followers to practice. Do you have any plan to do Revit tutorials in the future, because CAD gradually will be replaced by Revit. Keep up the good work and god bless you.
Thanks for the info
Hey Jay,
Why didn't you went for solid extrude from start. You started with surface extrude then thickened it. If I start from solid extrude from beginning of drawing, will it matter or it will be same thing ???
Sir..i have a problem with my autocad software..its the 2010 version..the problem is i cant find all the toolbars on the home tab such as surface toolbar,parametric toolbar and also not able to see the View Cube on 3d wireframe ...also not able to see the Drawing number ,view names on the left top corner ..facing alot problems..kindly respond with the solution.
Wow 😎
Great tutorial, thanks. How do you get the steering wheel to remain visible and as displayed in this video?
That was wonderful, I like it
Thank you so much
Better useful of *mirror* commond *Copy* space
B. Cause copy commond in always dimension take it
I can't select the surface
it is nice practce work
Thank You Very Much
Where did that concentric circle came from? @14:10 , can u explain how!!? Other than that everything went good
Start watching from 13:38, two geometries with different radii of internal circles are making that final concentric circle.
this is amazing video
when I try to extrude I only have a solid solid option, no circle, I have selection cycling turned on
Nice explan
Thanks
It is great. thank you
Hi, while trying to copy and paste along the z axis I found I couldn't input the length, it just kept showing 0.0000
veri god veri najs
Thanks so much sir g
Great sir
Very nice.
this size cm or mm pls tell me
Hello I have followed this tutorial extensively but whenever I get to the point of slicing it wont let me and it keeps saying no surface selected
Hello, I am not able to trim the 3 circles in the last object. When I select trim and enter the arcs are not marked and trimmed. What could be the reason?
Thank,
thanks for uploading....
It's amazing..
The polar tracking doesn't work for me. Any ideas how to turn that function on?
Hi! I love the video but I just hope you could explain more on WHY you are using so-and-so functions. THX:)
Can i change color after draw?? Or do I need to set it at the beginning..?]
Before slicing whhen i am going to extrude i am getting no option to extrude the circle...there is only one command i.e. 3d solid...what to do
I just can't get surface trim and slice to work for me. Do you have someone I can message you some pictures so you can see what I'm talking about?
how do you keep bringing up that little selection window when you click on the geometry?
hi!, at the minute 13.09 i do exactly what you do to trim the circle lines, but, nothing happens..just a message "the object was not processed by trim"... what can i do?..i will apreciate your support.
I can’t extrude and trim the rectangle one
I have never gotten beyone 5:55 where the second slice is performed. It keeps failing. Can you postulate what may be happening? Thank you!
I have a problem with the copy step… Tried everything but my component cant align with the z-axis😭helpp
what is the diffirence between press pull command and extrusion command?
THANK YOU!
it is nice work.