Thank you for this video. I find it interesting to see you Resin journey. Also, I am glad to see that you, your family, and extended family are OK. Best wishes for a safe and happy future.
Stay safe over there. Putting out videos is always nice, but take all the time you need for your family right now. Perhaps a good time for an extended vacation somewhere out of the region.
Im very happy to see that you were able to upload a video! I wanted to ask you if you know any way to get the Elegoo Neptune 4 plus to Israel? Thank you for being great, and stay safe.
Good Video, for screen protection on resin printers more usfull are screen protection foil like for cell phones, and you dont need to fight with silicon later. Best wishes, and I hope you and your family are fine
This journey is awesome because I find myself wanting to get into resin. Watching you go through the trials and tribulations of figuring out printing a helmet, getting started with resin, organizing a new studio, or printing with a new printer. I find the details you provide very helpful. Being honest and explaining where you messed up and why are genuine, and appreciated, as it reminds me that the person I'm learning from, is learning just as I am. :) Keep up the great work, stay safe during these scary times in Israel, and I look forward to the next video when you and the family are safe again.
A not-so-awesome journey: be warned, the government is trying to put the sellers and buyers of 3D printers through NICS criminal background checks. Your RIGHTS are in danger, be warned.
Not so awesome of a journey: be warned, the government is trying to put the sellers and buyers of 3D printers through NICS criminal background checks. Your RIGHTS are in danger, be warned.
Family needs more of you, than YTbers and Sponsors. Not a bad idea, to do some guest interviews instead, to keep producing quality content, while not spend much time on it, until everyone is safe and the situation is stable.♥️👍
You really shouldn't have resin anywhere next to your body even after it's been cured. No amount of spray paint is going to help either as the molecules are far smaller than the paint. I love your videos, however this one missed the mark for me.
Hey… he isn’t currently able to make content for us and I assume this video was prepared and set to upload to a week ago. For more info check his community page on his channel.
I used capton tape for leaks :D Never leaked tho, so I don't know if it works. Was suggested on a norwegian FB group. The cleanup and the fact that I had to use a mask (with a giant full beard) I figured resin was not for me :/
Cool - but resin feels even more unsettling compared to having an FDM printer run for 7 days or more... I haven't tried resin, but I mean - if you let resin leak under the LCD and well, brick the printer and be unable to fix it, not to mention massively stink up your room at the same time, that is way worse then letting the spaghetti monster haunt your FDM printer, as you are only really going to waste some filament and maybe have an easily removable blob around your hotend. I can now understand why you said "I feel like every project video is a fail lately" last week. But hey, we all make mistakes and hopefully learn from them, cuz we're only human after all. Stay safe!
Echoing the sentiments of the few comments before, first person that came to mind was you, hope you are well.
I hope you and yours are safe and sound ❤
Glad to see you are safe! God Bless you .
Thank you for this video. I find it interesting to see you Resin journey. Also, I am glad to see that you, your family, and extended family are OK. Best wishes for a safe and happy future.
Thanks
Great to see you safe!
Thank you!
Glad you are safe, stay that way.
Thank you.
Glad you were able to get a video out with everything going on. Stay safe.
He had some videos already done before the crisis and i believe this video is one of them
Love you, stay safe!
Yes, stay safe I send my prayers to you and your family. 🙏🙏🙏
Stay safe over there. Putting out videos is always nice, but take all the time you need for your family right now. Perhaps a good time for an extended vacation somewhere out of the region.
Yep. We will hopefully be able to get out tomorrow.
Im very happy to see that you were able to upload a video! I wanted to ask you if you know any way to get the Elegoo Neptune 4 plus to Israel? Thank you for being great, and stay safe.
I'd love to see you fail more 😂 in a good way! You're the only maker that I can relate to, everyone else just shows the wins!
Fails are the best way to learn.
good video. our thoughts and prayers are with you
Good Video, for screen protection on resin printers more usfull are screen protection foil like for cell phones, and you dont need to fight with silicon later. Best wishes, and I hope you and your family are fine
Stay safe!
This journey is awesome because I find myself wanting to get into resin. Watching you go through the trials and tribulations of figuring out printing a helmet, getting started with resin, organizing a new studio, or printing with a new printer. I find the details you provide very helpful. Being honest and explaining where you messed up and why are genuine, and appreciated, as it reminds me that the person I'm learning from, is learning just as I am. :) Keep up the great work, stay safe during these scary times in Israel, and I look forward to the next video when you and the family are safe again.
A not-so-awesome journey: be warned, the government is trying to put the sellers and buyers of 3D printers through NICS criminal background checks. Your RIGHTS are in danger, be warned.
Not so awesome of a journey: be warned, the government is trying to put the sellers and buyers of 3D printers through NICS criminal background checks. Your RIGHTS are in danger, be warned.
Hi, I just got my X1 off the Kickstarter and there are no settings for Chitubox. Could you share your settings?
Family needs more of you, than YTbers and Sponsors. Not a bad idea, to do some guest interviews instead, to keep producing quality content, while not spend much time on it, until everyone is safe and the situation is stable.♥️👍
You are using far too many supports on your filement printers. You can print them way faster and with great quality than what you showed.
You really shouldn't have resin anywhere next to your body even after it's been cured. No amount of spray paint is going to help either as the molecules are far smaller than the paint. I love your videos, however this one missed the mark for me.
Great video! I suppose I should now go print a massive helmet on my ApexMaker X1 ahhaha!!!
I’m glad to see you’ve posted. Please be safe.
Hello, could you maybe idk make a small pros and cons of bambulab x1c, i’d like to buy one x1c. Ty, love ur vids! ❤
Hey… he isn’t currently able to make content for us and I assume this video was prepared and set to upload to a week ago. For more info check his community page on his channel.
@@ericjones8289 Ok, ty. I forgot about the war that started 😱
coolvideo i hope you are fine in esrael
stay safe
to you youre family and others
Thank you
Stay safe during the madness. Our prayers are with you and the rest of Israel. Jehovah-Nissi will prevail.
I used capton tape for leaks :D Never leaked tho, so I don't know if it works. Was suggested on a norwegian FB group. The cleanup and the fact that I had to use a mask (with a giant full beard) I figured resin was not for me :/
Love your videos. I know its nuts over there right but updates knowing you are ok are welcome. Stay safe.
Be safe in Israel bro. Praying for your country.
free palestine
Hope you are safe in Israel, and that the conflict will end as soon as possible.
ממש סליחה על זה שהשארתי מקודם תגובה רעה, ההיתי ממש עצבני וזה היה לא במקום
please update your revopoint software and use baby powder .. looking forward to seeing you get a miraco though !
Ok I’ll try that thanks.
Always look forward to your new videos. Stay safe my friend.
Cool - but resin feels even more unsettling compared to having an FDM printer run for 7 days or more... I haven't tried resin, but I mean - if you let resin leak under the LCD and well, brick the printer and be unable to fix it, not to mention massively stink up your room at the same time, that is way worse then letting the spaghetti monster haunt your FDM printer, as you are only really going to waste some filament and maybe have an easily removable blob around your hotend. I can now understand why you said "I feel like every project video is a fail lately" last week. But hey, we all make mistakes and hopefully learn from them, cuz we're only human after all. Stay safe!
Fair point. Fair point.
Be safe in Israel bro. Praying for your country.
What if you used a wig cap to 3d scan your head?
Please be safe. Best wishes to you and yours
I think you forgot the kickstarter link.
I hope you and your family are safe !
Love project and please stay safe
Hope you’re doing well brother
Keep safe.
Thank you
Are you and your family ok ? 😢
This video leaked… sorry couldn’t help myself
Still making content during a war
Stay safe bro, we're all concerned about yours and your families safety and well being