I haven’t even shot my Evo3 S2 and this happens. No turning back now. I got mine with the stupid mbus flip ups and the old brace. That’s the only thing I’m in envy of. Oh, maybe the new trigger? Haven’t tried it yet.
Are the sights availble for purchase or can i swap out my old ones. I would like to see a delayed blow back option. And a 5 lb stock trigger. And a redesign of bolt that wont allow the gun to fire unless fully in battery
So I was told it’s illegal to have a brace on the 3+ and that i have I would have to have a federal paperwork if I want a brace/stock is that true? Just to be clear something like the setup in this video, the part that goes to your shoulder and is foldable. 10/22/23
All they had to fix is the grip and safety lever, upgrade the trigger. And make it gas piston, or roller delayed, or hydraulic buffer. CZ wth? Not that Bren 2 Carbine sh1t again. Pls keep the good stuff and only fix the damn issues!
I will stick to my upgraded EVO3 S2. Or I will upgrade to APC or MPX. Heck, SP9A3 gen2 looks to be more desirable than this. EVO3 was old but still good, however CZ just officially declared they fall behind in the PCC market with this new disappointment.😢
@@perrytilton5221 Good o' CZ play us like monkey tricks. This whole thing is a low-budget proprietary mag update. The only minor thing they fixed is that grip, which only saves us $24 if we were to buy a Magpul grip...... without fixing that safety lever or upgrading the trigger.
Did they screw up by reversing graphics pointing out the ambi AR style mag release and the ambi bolt catch? Because that makes ZERO sense to basically flip the mag release and bolt catch, yet keep them relatively similar in design, especially the bolt catch being where the OG paddle mag release was and looking identical. I mean, they clearly have been listening to the fans by redesigning the grip and updating the iron sights (tho I personally have no problems with them). And they did make it look cooler, which is a feat in and of itself since the Scorpion EVO 3 S1 is already one of the coolest looking guns out. But they started to lose me at the reversing the mag release and bolt catch while keeping their designs identical to the previous Scorpion. Then they 100000% lost me at needing all new mags. WHY!? Do you realize how many magazines I own for my Scorpion? At least 7-8 thirty plus rounders, a few of the 20 rounders, and 2 of the F5 50 round drums....and you're telling me I'd have to replace all of those mags with brand new ones? Pfffft! Fuck all of that. I was ready to sell my Scorpion EVO 3 S1 and upgrade to this......not any more
Cz is my absolute favorite but since the bren2 they are going in a wrong direction They just put AR features on the new versions plus a bit more futuristic look Plus the old scorpion looked as it was made by the gods (cz evo3 a1 is perfection) the new one looks like it was made by some gameproducer
Do it now has a vastly inferior mag release design (thanks, I guess?) and breaks compatibility with superior third party magazines, not to mention original scorpion mags. I feel really insulted by this crap.
I’m a CZ fan but this is so stupid. 3rd party mags for the previous gen evo are far superior to yours. I run PSA mags in my S1 and they’re superior to the crap OEM.
You guys make amazing firearms. Can't wait to get my hands on an EVO.
Awesome! Changes they were needed, just bought one now.
I like it, i have the old one, evo. I played with the new, loved it. Wish i could use the old mags
No not roller delayed?
Binary triggers will work with minor cutting to the trigger housing
I’m definitely getting this
MOST IMPORTANT QUESTION
Did you fix fireing out if battery issue???????????????
Beautiful......just pick up mines
I’ll probably pick one up when i see one at Scheels if it’s in stock.
I could live with the minor updates, but changing the magazines is a no-go for me.
Just picked up my 3+. LOVE it!!! What optic are you running on this in the video?
It looks like an MRO and a T2
I haven’t even shot my Evo3 S2 and this happens. No turning back now. I got mine with the stupid mbus flip ups and the old brace. That’s the only thing I’m in envy of. Oh, maybe the new trigger? Haven’t tried it yet.
Are the sights availble for purchase or can i swap out my old ones. I would like to see a delayed blow back option. And a 5 lb stock trigger. And a redesign of bolt that wont allow the gun to fire unless fully in battery
Will it come in the 16" carbine?
What is the brace shown on the mini? I would like to buy one.
So I was told it’s illegal to have a brace on the 3+ and that i have I would have to have a federal paperwork if I want a brace/stock is that true? Just to be clear something like the setup in this video, the part that goes to your shoulder and is foldable.
10/22/23
Why would be illegal to have pistol brace on a pistol? Filing paperwork with the ATF is for putting a stock on a short barrel rifle.
New mags????? What were you thinking? I predict you don't move too many of these...
All they had to fix is the grip and safety lever, upgrade the trigger. And make it gas piston, or roller delayed, or hydraulic buffer.
CZ wth? Not that Bren 2 Carbine sh1t again.
Pls keep the good stuff and only fix the damn issues!
I will stick to my upgraded EVO3 S2. Or I will upgrade to APC or MPX. Heck, SP9A3 gen2 looks to be more desirable than this.
EVO3 was old but still good, however CZ just officially declared they fall behind in the PCC market with this new disappointment.😢
I'm wondering, did COLT's executives got promoted into CZ's board???
Does it use the old mags?
No but the new mags work in the old scorpions
Why would they ruin the best thing about the scorpion?
Nope
@@perrytilton5221 Good o' CZ play us like monkey tricks. This whole thing is a low-budget proprietary mag update.
The only minor thing they fixed is that grip, which only saves us $24 if we were to buy a Magpul grip...... without fixing that safety lever or upgrading the trigger.
Did you guys "fix" the 10lb trigger??
The original design calls for heavy trigger Bc of AUTO select fire, so the semi doesn’t give you select fire but keeps the heavy trigger
Can u give me the link where can i purchase the brace also how to install it pls. Thank you.
Did they screw up by reversing graphics pointing out the ambi AR style mag release and the ambi bolt catch? Because that makes ZERO sense to basically flip the mag release and bolt catch, yet keep them relatively similar in design, especially the bolt catch being where the OG paddle mag release was and looking identical.
I mean, they clearly have been listening to the fans by redesigning the grip and updating the iron sights (tho I personally have no problems with them). And they did make it look cooler, which is a feat in and of itself since the Scorpion EVO 3 S1 is already one of the coolest looking guns out. But they started to lose me at the reversing the mag release and bolt catch while keeping their designs identical to the previous Scorpion. Then they 100000% lost me at needing all new mags. WHY!? Do you realize how many magazines I own for my Scorpion? At least 7-8 thirty plus rounders, a few of the 20 rounders, and 2 of the F5 50 round drums....and you're telling me I'd have to replace all of those mags with brand new ones? Pfffft! Fuck all of that. I was ready to sell my Scorpion EVO 3 S1 and upgrade to this......not any more
Owned
Nice
Love it. However, CZ...how are you going to do a company official video and not retake the guy unfolding the stock in one move. Lol #C'MONMAN
The people hoping for a 10mm version are gonna be sorely disappointed. 😅
Cz is my absolute favorite but since the bren2 they are going in a wrong direction
They just put AR features on the new versions plus a bit more futuristic look
Plus the old scorpion looked as it was made by the gods (cz evo3 a1 is perfection) the new one looks like it was made by some gameproducer
Nobody asked for this gun… it looks like a mini bren… they should’ve just came out with a hardware pack for the OG scorpion
Do it now has a vastly inferior mag release design (thanks, I guess?) and breaks compatibility with superior third party magazines, not to mention original scorpion mags.
I feel really insulted by this crap.
mags are a no deal for me.
Like
I’m a CZ fan but this is so stupid. 3rd party mags for the previous gen evo are far superior to yours. I run PSA mags in my S1 and they’re superior to the crap OEM.
Fatty barrel optic???
Don't like it, waiting for the future Evo 4 version.
Hi
100% Flop.
Thank you for saying that
I dont like it too
Its the ugly qousin of the original evo3
This sucks. And CZ isn’t even going to try explaining why they went this route? This video isn’t fooling anyone.