Mobile Winch Powered Table Lift✓
HTML-код
- Опубликовано: 18 окт 2024
- Support me on Patreon: www.patreon.co... Project no.90 diy homemade table lift for carrying objects and automatic scaffolding.
this project is suitable for lifting heavy objects, it can also used as a automatic scaffolding.
i used a 12v Modified winch, the winch is powerful enough to lift at least 150kg of load, it also depends on the battery's power.
i used some tubular framing, and a 6.0mm steel plate for lifting bed.
and for the railings i used a 1x1 angle bar with v-groove bearing wheel.
the design for me, its look like a hydraulic forklift.
-this is a thesis project of students, the research is to carry some gallons of mineral water on the table down to the floor.
LINKS THAT HAS BEEN USED IN THE VIDEO:
YOU CAN SUPPORT THIS CHANNEL BY BUYING THIS ITEMS.
Machifit MGN12H Linear Rail Block：bit.ly/2WFBoyn
Machifit MGN12 600mm Linear Rail Guide with MGN12H Block: bit.ly/2HT4WVP
Machifit MGN12 1000mm Linear Rail Guide with MGN12H Linear Sliding Guide Block: bit.ly/2FSsVSF
8mm Bore Diameter Pillow Block Ball Bearing: bit.ly/2OJeHX3
7pcs 12mm Shank CNC Lathe Turning Tool Holder Set: bit.ly/2K4VBMy
G1/4-19 13x2mm BSP 55 Degree Tap: bit.ly/2TSVnrB
Titanium Coated Deburring External Chamfer Tool: bit.ly/2OG5HCi
Pillow Block Bearing: bit.ly/2uE97MG
Push-pull type fast clamp: bit.ly/2FQ5k3N
2032mm x 13mm Saw Blade: bit.ly/2QRKYQb
Handheld Copper Pipe Tube Expander: bit.ly/2rWa6pW
SBR20-1200mm linear rail and SBR20UU Blocks: bit.ly/2RiKUIC
SBR16 1000mm Linear Rail and SBR16UU Bearing Blocks: bit.ly/2GIcniW
Drillpro Turning Tool Post Holder: bit.ly/2EUban5
SANOU K12-100 Lathe Chuck: bit.ly/2TextHc
Slide Bearing Block: bit.ly/2RhZe4d
Slide Bearing Block: bit.ly/2Q6K4tU
20Pcs Diamond Coated Core Drill Bit Set: goo.gl/mPZ4B6
Opening Locator: goo.gl/sQmMce
LIKE MY FACEBOOK PAGE / pinoydiybuilds
SUBSCRIBE TO MY CHANNEL / sekaustria
AND SUPPORT ME ON PATREON / sekaustria
Like Share Subscribe for a Weekly Videos #Diy-Projects #Homemade-Projects #DoITyourSELF-Videos #DIY-Channel
Everything in this video is awesome:the project,the face reveal and of course the beautiful cat and dog.
Hahaha 😅😅😅
Perfeito , só falta uma carenagem para as rodas dentadas kkkk. Parabéns !
Perfect, just missing a fairing for the kkkk sprockets. Congratulations !
gaya ng dati nice build ulit bro 👍👍
Salamat bro
You are a good man
Thank you so much
realy i like your jop
Nice! I really like it:)
Thanks bro
It saves senior citizen's back! Brilliantly made! ♥♥♥
Молодец! шикарно получилось!!!
Awesome work. So many projects was inspired from your channel that i will run out of time this year. Great thanks to you that you share your work with us.
Wow thanks, Goodluck to you bro 😁😁😁
Классный Станочек, для гнутия листа под 90 градусов.
the times were in now is when you should be wearing a mask, and now you take it off lol, Great work man, love the channel
Great project - it will spare you for a lot of back pain!
Thanks bro
Nice build bro. Me gagayahin na naman ako. Nice idea. Ang galing!
te quedo genial amigo creo que ya tome nota para hacer uno graciassss eres muy creativo felicidades
Very good . I will follow this model.
Thank you very much !
Nice job; we featured this video on our homemade tools forum last week :)
Could use the frame design and a manual come along for those 'just not the expense of the whole thing' kind of projects. Its a great build. Kudos.
I liked your press which you made using hydraulic jack! Please show me how you made it !
Check my channel bro
Beautiful job, dude! Really well done! 😃
Thanks bro
Bro si let's learn something ba pinoy din?
Не плохо! Но надо было сделать на задней нижней полке противовес и переднюю нижнюю полку убрать, что бы можно было подъезжать ближе.
👍👌✌😍🎖😎🙏👏Good work
Awesome sek. As always.
Great work you have made.I would like to thank you very much and to see more creative work.
Супер Класс Удачи тебе
Muy buen proyecto, te felicito,..también se puede hacer con un malacate manual, saludos desde R: Argentina
دائماً أنت مميز ومبدع ومبتكر
You could add a snatch block to increase the load limit on the winch cable. Awesome build!
I think he's aware of that bud
@@DOWNMFDOWNMF now we know he is.
Super finish
Best wishes.
Nice 💖👍❤️🎈
Thanks bro
Tuyệt vời , rất hay và hữu ích . Cái tời kéo rất khỏe .
Ну Фсё офигенно,особенно белый свитер рыбок!
Красавчик- здорово!!!
Make lift for first floor for senior cityzen . Nice very nice can used ready haavey motor n cross wiring than motor run upside n downside.structur is nice
outro bom video!
Супер! Мне бы такую лебедку. ))
Thanks bro
good job
Super pogi at super galing! 😘
😂🤣😂🤣
Great project, bro! Thanks for sharing!
Interesting rig !
Thanks bro
ang galing na naman idol sek. nakakaingget hahaha.... sana all 😀😀😀
😅
Genius idea!
Thanks bro
@@SekAustria I wish if you could give your email id , we can talk!
Excellent work you have helped with your design to be able make a mini forklift for the same purpose,mine needs to be as low as possible.You have great skill.
Creative💪💪
Thanks bro
Very fine ... congratulations >>>
Very good
ang galing!!!!! magkano kaya magpagawa sau ng automatic lifter na sing taas ng kalahati ng height ng 1x40 container van?
Bon travail!
Belle conception.
Nice
!!! GENIAL !!! NO HAY MAS QUE DECIR ...
Awesome!!..
Thanks bro
Awesome!
Thanks bro
@Sek Austria, Thank you for all the great videos you share with everyone. Your channel has great content, an always awesome videos. Keep up the good work.
Parang forklift ahhahahahahah ganda idol
Hahaha
Чудовий задум, друже!
Very creative!
Nagpa kita ka narin sa mukha mo idol!.👍😊
😅😅😅
Awesome.
Well done, bro.
Thanks bro
Muito bom gostei bacana demais amigo valeu
Good for union workers who work for the city!
BRAVO!!!
יפה כל הכבוד
very smart 👍🏽👍🏽
Pare ka lupit mu ka pwersa na yan..
Wa pare. Mayna yamu views hahah
Ang galing mo talaga idol
Thanks bro
Awesome
Thanks bro
2:38 uy que susto! 👨🏭
4:37 uy que susto! 🐶
😜
Clever!
Грузоподьемность - "один человек без напряга перетащить". Хотя, для больных и инвалидов может и полезно.
Galing idol..parang forklift..bilib talaga ako sa taba ng utak mo..sana all..hehe..gudluck po
Nice job!
Can you please also provide a link to the shop where you got the V-groove bearings? I looked on banggood but cannot find this size.
I dont have links for them bro. I just bought in a local hardware store
@@SekAustria no problem. I searched some more and found several types of V-groove and U-groove bearings on AliExpress. I choose U-groove and will use those in combination with 10 mm round rod welded on square tubing.
Boss ayus yang project mo..👍
Galing..
Ask q lang boss kung pano bend nung square pipe?..
Salamat
Check mo ibang videos ko may ginawa akong square bender
Galing mu naman kaluguran...
Haha salamat soy
Hi Nice machine
Can you make it to lift heavy objects upto 12 feet ?
I wish: I were you! ♥♥♥
😂
Hi Sek
Can you visit India to showcase this machine ( which carries heavy material up to 12 to 15 feet height ) ? :)
I want to use it for construction work.
That might be impossible for me to go there bro. Sorry
It so strong...
Muy bueno.
Good bhaiya
¿podrías crear algo así, pero más pequeño y portátil como para subir y bajar garrafones de agua?, saludos.
i didn't watch the full video yet but i know it's awesome!!!!! comment first! lol
Increíble 👏👏👏👏
lodi great work
Brasil no Sek rsrs
chido
😅😅 thanks
sir from phillippines .
🔥🔥🔥
nice work but for the next time could u put yr dog away from u when u welding (to protect his eyes)
Need this for my shop .....
That's fine
What is the power of the winch motor you used?
Hi,
Your system can not work safely by reversing the rotation to down way if you do not have any mechanical break system independent of the motor it self.
👏👏👏🙋🙋🙋❤❤❤
😅😅😅
Now all it needs are some 12" wheelbarrow tires to cope with the rough ground around here and it's perfect ;) Seriously though, nice work as always. Even your projects that aren't 100% suitable for someone's needs, they still provide inspiration and helpful concepts that translate to similar projects. Keep up the good work
Thanks brother
paps may tuitorial kaba pano mag weld ng maninipis na bakal pansin ko kasi may kanipisan ginagamit mong bakal pero ni minsan diko napansin na nabutasan mo pagnag weweld ka..may welding machine ako 250amp pero ang pinaka mababa eh gang 90amp lang pag nag weld ako kahit nasa 90amp na butas parin bakal newbee pa sa pag wewelding. sana may vid pa sa welding.. salamat!
Kahit 100amp pa sir pwede. Basta yung pagkaputol ng bakal is walang gap. Mabubutas talaga yan sir kapag may siwang, if possible dapat lapat na lapat siya.
And nabubutusan din ako paminsan minsan dahil yun sa nasobrahang babad ng pagkaweld ko. Practise lang sir ganyan din ako date.
@@SekAustria salamat paps may ma recommend kabang rod na madalas mong gamit?
for 200-300 barrels need work can u show how to build the thing plz upload video need ur help
for 200kgs barrel wht i mean
How much is the total cost of.materials and where to find the winch of that model.
mantaf teman
Add safety screen na lang bro.
👍👏
😘👍👍👍
kaya ba makagawa ng costumised para outboard engine? them om me magkano. thanks
Which motor used it