VIEWER FAILED BIOS FLASH, CAN WE HELP? ||| B350 MSI CARBON
HTML-код
- Опубликовано: 9 сен 2024
- My Tools:
DDR3 and DDR4 Post code tester (white ddr card): s.click.aliexp... *
Tweezers: de.aliexpress....
Soldering Station AIXUN T3A T245 B Set: de.aliexpress....
JBC tips that i use: C245-906 (bought of a german retailer) , C245-030 (bought of a german retailer) , C245-908 amzn.to/47eHP05 * , C245-752 amzn.to/47BqxtO *
PCIE Post Card: s.click.aliexp... *
Side Cutters: de.aliexpress....
DDR3 DDR4 Data line Tester: s.click.aliexp... *
Pre heater: s.click.aliexp... *
Reball jig: s.click.aliexp... *
needle probes: s.click.aliexp... *
CH341A Bios chip programmer: s.click.aliexp... *
New Bios programmer:
www.reveltroni...
Soder Wick: s.click.aliexp... *
Microscope: s.click.aliexp... *
Microscope Ringlight: s.click.aliexp... *
Microscope Arm (used 3D printing to make it work, can provide an STL if needed): amzn.to/3R1hn48 *
Power supply: s.click.aliexp... *
12V to 24pin ATX adapter: s.click.aliexp... *
Components Tester: s.click.aliexp... *
Hot Air: Some Quick 861DW counterfeit
The Flux i use sucks, so dont buy it lol
The Copper wire i use is 0.1mm Enameld wire, link is dead, but the wire wasnt great anyways
Oscilloscope RIGOL DS1054Z amzn.to/3R2aDmE *
Thermal Camera Seek Compact amzn.to/47hGeX6 * (I would check out the infiray P2 Thermal cameras to be honest if i wouldnt have already bought this one!)
Multimeter (cheap one for beginners, that i still use): UEZNIRN IEC61010-1 multimeter
UV light: amzn.to/40L0fD1 *
/ mainboard_medic
Links marked with * are affiliated links and i get a small comission from them without you paying extra. (The * is not part of the link)
For any business inquiry :
Xorat.business@hotmail.com
YOOO mein board video, sehr nice ^^
Danke nochmal fürs fixen ^^
Ich habe keine Ahnung, woher der solder kommt, weder ich noch der originale Besitzer vom Board haben daran gearbeitet.
Vielleicht hat der CPU in meinem anderen System nicht funktioniert weil er zu hungrig für das Netzteil war xD
Ende gut, alles gut, I guess.
Thx a lot!
This was my Board and my friend sent it in.
We tried to fix it but lost all hope.
Amazing that you could fix it rather easely and actually made a video out of it.
Thanks again
What caused this Problem? Power outage?
Wieder ein interessantes Video. Ich habe kürzlich auch ein BIOS update bei einem X370 Gaming Pro Carbon vermasselt. Hatte dazu einen Ryzen 1600 mit ähnlicher behelfsmäßiger Kühlung wie im Video verwendet. Was natürlich bei einem BIOS Update ziemlich dumm ist. CPU hat überhitzt und einen shutdown bei 10% Updateprozess verursacht. Und das Board hat ja auch kein BIOS Flashback. Mußte mir dann auch noch einen 1,8 Volt Adapter kaufen :( Zum Glück hat wenigenstens die Klammer von meinem CH431A gut Kontakt bekommen und flashen verlief problemlos. Der LAN Port funktioniert auch ohne Probleme. Ich hatte erst Bedenken, dass die MAC Adresse reingepacht werden muß. Hatte das irgendwo gelesen. War aber nicht der Fall. Btw, ich finde deine Beiträge Klasse :)
Sehr gut! Bios flashen ist tatsächlich nicht trivial!
Ich hatte es bei Asrock boards, dass ich die MAC neu einspielen musste!
Everyone is getting the 5800 3D because it a cheap but very powerful upgrade.
True that, i did ot as well haha!
yeah, we actually only went for a 5700x cause of budget
How or what do you use to redo bios on the TPM, pls you didn't show how you did it here
Oh right i didnt show it, its a selfmade cabel. I used the pinout from the boardview to build a connector! I will show that the next time i do a bios flash!
Hi.
What is the current consumption on your tester while running linpack?
With the 1700X it was little over 9A!
my cpu hot only cpu led stuck bios problem?
Anything you tried?
The error may be due to a corrupt BIOS. Did the error occur suddenly? Has the CPU or RAM been replaced? Have you tried a BIOS reset? If your Board has BIOS Flashback you can easily try flashing it with a so prepared USB Stick and see if the Problem is solved.
You could have just started by flahsing the BIOS saving alot of time, as the customer told you that it had a failed BIOS update attempt.
you clearly dont have the first clue about diagnostics. always validate the issue before taking action
You are right, but as you were able to see, there was work done on the backside off the board and that could have also been a cause, but it wasnt in this case.
@@MainboardMedic Ok, but flashing the BIOS was not going to damage it anymore, and it faster than swapping CPUs and measuring current and so on. And you had the info about failed BIOS flashing. If it was me, in that specific case, I would have started by flashing the BIOS.