I followed your video instructions, saved my TORO mower, which stopped after running for about 20 - 30 seconds. I was about to give it up after trying everything I could (changing air filter, oil, gas) until I discovered your video. Step by step instruction in such great details helped me tremendously. I opened up the carburetor and sprayed clean it, changed a new fiber washer. Now it runs like new. THANK YOU VERY MUCH. You are a hero!!!
Thanks man. Came in very handy today. Elderly neighbor saw that I work on cars a lot so he asked if I could take a look at his Craftsman w/ 6.5hp Tecumseh. Got it running in an hour or so with your video. Thanks again!!
I have the same lawn mower with a similar problem. But I found out that I just needed to replace the float (although I replaced the needle and the o-ring, too). I couldn't have done it without this video! My husband says I am awesome and he can't believe that I fixed it without his help! Thank you!
Great video! Way to break down “every” step. You would be surprised how so many other videos don’t go into the most important details. It helped me so much. Thanks you.
Wow I didnt know the bolt in the bottom of carb was a functional part of the carborater. I took mine out and did not see any holes period. I bet that is my problem. Please God let that be it. Thanks for the great service you doing for your fellow mankind. You are a great asset to YT, and a great human being.
This was extremely helpful to me in repairing my lawnmower. You provided excellent instructions for someone who doesn't typically do this type of repair. You saved me a bunch of money. Thank you!
My 2004 Toro Lawn Mower just keeps on going. I thought it finally reached the end recently and then came across your Video. After complete cleaning of the carburetor my mighty mightyToro is humming again. Thank you!!!!
same i agree, as i stated above my grandma purchased the personal pace mower that i still use to this day, 10 years ago! what an awesome mower toro made. never replaced a wheel or anything. i do need to replace the back grass guard that drags the ground because its ripped but thats very minor. ill never buy anything but toro push mowers thats for sure👌
Excellent video. Very detailed. I followed every step of this video to troubleshoot my lawn mower and it worked.Now I feel more comfortable with trying to make any repairs on my lawnmower rather than taking it to a small engine shop. Not only did this video save me time, it also saved me money. Thank You so much.
Great video! My Toro was stubborn to start and sputtered the whole time. I am not much of a mechanic at all and have never operated on my mower until now. This video gave me all the insight I needed. Cleaned her up and replaced a few parts and now she is mowing as good as the day I got her! Thanks!
Hey donyboy, just wanted to extend a big thank you for your videos. There are a lot of people just trying to make a buck in this world, and I appreciate the fact that you took the time to show people how to do some diagnosis on their own. I am an engine noob and through a few of these videos, I figured out that I needed a new magneto and some new carburetor gaskets. Now the engine runs very well again - and for way cheaper than had I gone to the repair shop. Thanks again - cheers!
Thanks for helping me successfully get my mower running again. Your videos are easy to follow and really informative Don! And you have a great first name, haha!
Thank you for this lesson. I have two personal pace Lawn Boys with the same Tecumseh engine. Followed your steps and both are singing. It appears they will both run another twelve years . The spiritual connection between a man and his mower is sacred.
One of the best how-to videos I've seen on RUclips - and I've viewed hundreds. Your narration was great without any fluff and editing was fantastic to match what you were doing. Excellent job and this computer nerd is ready to tackle cleaning up my mower! My girlfriend has one too, so we'll be saving hundreds in repair bills! THANKS!
Finally, a good video. Well shot and step by step instructions. Can you show how to repair a gas leaking out of the oil filter. Please show how to remove and fix.
Thank you so much. This video saved me btwn $150.00-200.00, on a repair at a service station. This was my first time taking on an engine maintenance/repair. Thanks again!
Wow Thanks. I bought one at a garage sale last year for $20, looked like new. The owner had put mixed gas in it. I changed the gas cleaned the plug and run all summer then it quit. I took it apart today and "thought" I had cleaned the carburetor. THEN I watched your video. It was those little jets in the bolt that hold the bowl on that I had missed. Very good video..
Best video I have come across on the Toro 6.5 with Tecumseh engine. thank you for your clear, patient and detailed directions, including the linkage advice. I spun my wheeels for hours untill I discovered your helpful video. Thank you. You have set a high standard for RUclips instructions, professor!
Our lawnmower had the starts and then stops after a couple seconds issue. This is our exact model, so this video was very helpful. Our issue ended up being with one of the holes in the bolt being clogged. Thanks for the detailed video which helped us a lot in fixing the issue ourselves!
I watched a ton of vids, but it was your detailed version that I used to actually attack my problem. After putting it all back together, it started with the first pull, but cut off again in 10 secs. I may just repeat the steps & try again, cause it wasn't bad at all. Thanks again.
@@donyboy73 Thanks, I grabbed it to fix up & surprise my uncle so he wouldn't go into this new season borrowing mine. if i can't get it right today, I'll try a new carb! Thanks again.
Thanks man, you show step by step in your video's without missing out anything that's why i always watch your video's channels, if i only knew what sizes feeler gauge to use to set the valves clearance on a 6.5hp push mowers
I am a technology guy, and I never thought I would be able to pull the carb off and let alone fix my mower! Your teaching is excellent, granted, I wasn't as fast, but I followed the steps and now I am mowing the lawn! Great Job, and keep up the good work!
I want to thank you for the excellent step by step video. The part about cleaning the fixed jet gave me the clue I needed. Indeed it was the fixed jet that was dirty. Your clarity and completeness of instruction is a cut above. Thanks again
After 5yrs with my lawnmower down...this video helped me fix it all by my lonesome..you deserve a like and subscribe..it was a plugged carb bolt..the three holed one had a brown jelly in it...old fuel i guess
This is an excellent, well-explained and well-filmed DIY video which enabled me to get an old, poorly-maintained Toro mower up and running again. Thanks a lot!
Great video, so detailed and clear. My 11 years old Toro lawnmower would start but wouldn't stay on. I followed this video step by step and now my mower works like new. Thank you for sharing this video.
Excellent presentation sir. The shop my son kept taking his mower to didn't see that the float was half filled with gasoline. I ended up with the mower, he went with a lawn service.
WOW! Great video! Fixed my mower thanks to this video. Replaced oil, spark plug, carb bowl, carb O-Ring, primer bulb, and the air filter. My 5 year old Toro Tecumseh runs great now. Thank you so much for taking the time to create this video.
Thank you for this video. I am a self proclaimed idiot when attempting to fix anything mechanical. I followed your instructions, and got my mower running like a dream!!! It was simple once I found a piece of wire small enough to fit in the tiny tiny holes! Thanks again
I just bought one of these used. It ran but needed a good cleaning so I disassembled it down to the block/flywheel but left the muffler on. I was having a helluva time getting the carburetor and linkage back on until I watched your video. Once I realized my mistake and took off the muffler, etc. it went back together and started up in a snap. Thank you!
Thank you so much. On this TORO Personal Pace Recycler that I just got, the linkages were not connected. You really helped me. New carb and it runs like a rocket!
My lawnmower wouldn't start and my son told me I needed to take it in for repair. Instead I found this video on RUclips easily fixed it my self. All I needed to do was remove the carburetor brass jet screw, clean it, then replace it. Thank you for making and sharing this excellent video.
Great video - very clear and detailed. I have one like this that won't start. When I pulled the float bowl, there was no gas inside it. After trying everything on the video, I finally put in a new carb. There are 2 internal needle jets inside that can't be adjusted or cleaned. If their bad, the carb has to be replaced. The only recommendation I have to add is to change the gas line when you pull the tank
Just used this video to clean my lawn mower. Other than it needing a new blade, it runs perfectly fine! Thanks a lot to an excellent tutorial From this novice to you, Sincerely, Thank you
Hello! This is a very good video post. While i was watching it another idea came to my mind. I went out put the mower on its right side so i can access the carburettor. Using 1/2 wrench i removed the cover, cleaned it and the O-ring. Then i removed the pin and took out the niddle. I didn't have carburettor spray/cleaner so i simply used deodorant spray to blow it clean. Everything went back in place and now i can start the mower with half pull. Thank you very much for the great post.
Thanks so much. You saved me $130 and two weeks without my mower. Started on the first pull; stayed running until I finished. So easy to follow that I watched it through once and did the full cleaning in about an hour.
My 22" Toro 6.5 HP mower with Tecumseh engine (model 20007) wouldn't start. Fresh gas wasn't enough. After watching this video, felt comfortable attempting maintenance myself. Home Depot has Toro kit (Model 20236) with new air filter, spark plug, engine oil, and gas stabilizer for $15.44. Also bought can of carburetor spray. Came home, and in less than an hour had the machine apart and back together. Video correctly identified all the parts, tools, and steps needed. Worked on the first pull!
after my tower not wanting to start for past 3 months i changed plug and filter still nothing. after seeing ur video and cleaned CARB wow it started like brand new mower. thanks!!
Thank you for this wonderful video, I took my carb off, cleaned it...replaced the float cup, O ring, and needle assembly. When I was done, it started right up! I also replaced a couple of things to fix my drive mechanism...although now it is always in drive...gotta figure that one out. The lawnmower also runs high, or fast constantly...working on that too. But, ITS now RUNNING! Thank you so very much!
Awesome video!!! My toro recycler 22 would start for a few seconds and sputter...I tried to clean the carburetor but ended up tightening the screw/jet too hard and broke the screw. Bought a $15 dollar replacement carburetor and replaced the whole thing. Runs better than it ever has. Thanks so much for putting this together!
One of the best how- to's I have watched on You Tube. I was trying to get the carb off my Tecumseh engine earlier and got stuck, Your video has me ready for tomorrow and the renewed attack. Thanks
omg i cannot thank you enough my mower would run for a sec after you primed it then die so i bought new spark plug and air filter but did not fix it so i was at a loss then i watched this video took off the bowl cleaned the littler jets on the nut cleaned the bowl but it back on primed it pulled the cord and BINGO ! ran better then it ever has saved me who knows how much money for repairs i love the youtube community Thank You again for sharing you knowledge
Thanks donyboy. My brother in law had all the carb and governor linkages in the wrong holes. Once I knew the correct configuration the lawnmower runs nicely.
Thank you very much, this gave me the confidence to clean the carb and now its running 100% again. i was ready to blow another 400 bucks but i can get at least another season out of this one. i beat the crap out of it and it just keeps mulching leaves, twigs grass etc.. Again, THANK YOU!!!
Thank you for the excellent tutorial, I just picked up the same lawn mower in a yard sale for $50 bucks. I will be checking everything out this weekend.
Thank you so much sir. I viewed this video and followed your instructions. That little tiny hole right below the threads was non existent on my 2006 model 20016 so i made one. Small though. The mower was not cranked since 2010 when the transmission quit working. I cleaned the plug and put in fresh fuel and she cranked up on second pull and purrs. AMAZING. My next job is to change the tranny (part no 106-3955). Can't find instructions for this model. Will use schematic. Thanks again Dony
Thank you very much for this tutorial. After watching this I was able to diagnosis my Toro mower starting problem. I followed your video step by step, and found the problem. It was old gas that was prevent it from starting. This is strange since the gas (Premium grade) is only 5-6 months old. I'm glad your video helped me fix the issue since the repair shop was going to charge me a minimum of $100 to do a standard tune up.
This video is GREAT! It inspired me to clean my carb and my mower, which wouldn't start, runs better than new. Thank you very much for taking the time to make this video!!
Great video and quick fix, most cases. I'm not a small engine shop but I do have own a lawn mower and an edger - both with tecumseh engines. Even though I have rebuilt carburetors previously on my own equipment, I could have saved time and a few bucks (carb kit) had I previously found this video. I just purchased a nice used mower off of craigslist for $38 that did not run, as I suspected it was either bad gas or a dirty carb. I used the technique in this video and saved time and money, and fixed a lawn mower. With a new blade, spark plug and fresh oil, this one should sell quickly for a nice profit.
Fresh gas, new plug & air filter, clean carb like in this video. Mine sat outside, uncovered for years in the Colorado winters and has been very neglected. Wouldn't even start. Did what's recommended and it runs like a champ again.
I have the exact same mower that I bought new and it ran fine year one (live in Western NY so its put in a shed for about 4 months for the winter) but year two, it ran very rough, and I believe before the end of year 2 it would not run at all. It's been sitting, untouched, for 2+ years. I'm gonna look at all these scenarios and hopefully I can get her back up and running. Great video, thanks!
This worked beautiful. Thanks so much. Saved me $160.00. Called a repair place because I had a few questions and they told me that i needed to stay off the internet. It needs to be fixed by a trained professional....What a load of crap. Thanks again!!
Great video. I have the same mower and would start after priming and then stop shortly after. I turned it on its side, took off that brass screw(without taking off the carburetor or anything else. I cleaned the little holes in the screw/bolt with a pin and then put it back it. After this the mower ran fine. BUT - I will do the other maintenance(spark plug, filter, carburetor cleaning) soon. Thanks for this video.
Catching up on some of your older videos. That engine is common on a lot of mowers. Everyone I have seen has a dirty governor lever like you showed. Keeping it clean is imperative to proper operation. Good job !
You went to all this trouble and didn't rebuild the carburetor? I really wish you had, so I could see where everything goes.... Great camera work. Way better than what I've seen elsewhere.
Thanks for posting this video. I have exactly the same engine on my lawn mower and experienced the same problem as you described at the beginning. Following your instruction resolved my problem!
Your videos are great! FYI :: I have a Toro GTS that's 12 years old. Runs like a champ. I put it away properly in the Fall and come Spring it fires right up. Simple seasonal maintenance and keeping an eye on things like the air filter keeps this "Tecumsey" healthy
I have a 2 stroke Toro GTS that was not stored properly, with the fuel left in it for a very long time, and the carb was incredibly gummed up with brown tar blocking everything. Always draining out the carb entirely for storage would have prevented it, but the previous owner never did it.
i LOVE my personal pace. wont ever get rid of it because my grandma bought it new 10 years ago and ive maintained it through the years and still do customers yards with it. does great! edit : my grandmother passed away but the mower is still with me 💙
@@donyboy73 yea i can tell the new ones are extremely light which in a way is a good thing but on the other hand its flimsy. my old toro even has the electric start. i should slap a new battery in it and a starter solenoid if it needs it. i havent used the electric start in years. thanks for the response ✌
Great video. Thank you for sharing your steps to fix the mower. I have the exact same engine on my mower and now I know what to look for. Thank you again.
I have that same mower and that is not how my primer bulb works. You have to actually press the bulb all the way in and hold for one second. There is a little mechanism that is pushed back out with a spring when you release it. Did you really just prime that bulb as shown in the video, or did you find you had to do what I have to do? I recently replaced my bulb for the 3rd time (mower is 10 years old) and I am still having some issues and I think it maybe the spring itself. Just curious if you have run into that before.
I followed your video instructions, saved my TORO mower, which stopped after running for about 20 - 30 seconds. I was about to give it up after trying everything I could (changing air filter, oil, gas) until I discovered your video. Step by step instruction in such great details helped me tremendously. I opened up the carburetor and sprayed clean it, changed a new fiber washer. Now it runs like new. THANK YOU VERY MUCH. You are a hero!!!
Thanks man. Came in very handy today. Elderly neighbor saw that I work on cars a lot so he asked if I could take a look at his Craftsman w/ 6.5hp Tecumseh. Got it running in an hour or so with your video. Thanks again!!
I have the same lawn mower with a similar problem. But I found out that I just needed to replace the float (although I replaced the needle and the o-ring, too). I couldn't have done it without this video! My husband says I am awesome and he can't believe that I fixed it without his help! Thank you!
Great video! Way to break down “every” step. You would be surprised how so many other videos don’t go into the most important details. It helped me so
much. Thanks you.
Wow I didnt know the bolt in the bottom of carb was a functional part of the carborater. I took mine out and did not see any holes period. I bet that is my problem. Please God let that be it. Thanks for the great service you doing for your fellow mankind. You are a great asset to YT, and a great human being.
My issue is getting that off while leaving the carburetor on
This was extremely helpful to me in repairing my lawnmower. You provided excellent instructions for someone who doesn't typically do this type of repair. You saved me a bunch of money. Thank you!
I followed all of the instructions in your video and was able to get my mower running again. Thank you for posting this video; it was very helpful.
My 2004 Toro Lawn Mower just keeps on going. I thought it finally reached the end recently and then came across your Video. After complete cleaning of the carburetor my mighty mightyToro is humming again. Thank you!!!!
same i agree, as i stated above my grandma purchased the personal pace mower that i still use to this day, 10 years ago! what an awesome mower toro made. never replaced a wheel or anything. i do need to replace the back grass guard that drags the ground because its ripped but thats very minor. ill never buy anything but toro push mowers thats for sure👌
A friend of mine gave me this same mower because it wouldnt stay running, your video helped me to get it working and now I have a free mower. Thanks!
same here!
Worked for me EXACTLY as described. Detailed verbal instruction, close up video with demonstration with timely tips on what to watch out for.
Excellent video. Very detailed. I followed every step of this video to troubleshoot my lawn mower and it worked.Now I feel more comfortable with trying to make any repairs on my lawnmower rather than taking it to a small engine shop. Not only did this video save me time, it also saved me money. Thank You so much.
Well done video. Concise, but very informative. No silly talk, just the facts. Much appreciated.
Great video! My Toro was stubborn to start and sputtered the whole time. I am not much of a mechanic at all and have never operated on my mower until now. This video gave me all the insight I needed. Cleaned her up and replaced a few parts and now she is mowing as good as the day I got her! Thanks!
Hey donyboy, just wanted to extend a big thank you for your videos. There are a lot of people just trying to make a buck in this world, and I appreciate the fact that you took the time to show people how to do some diagnosis on their own. I am an engine noob and through a few of these videos, I figured out that I needed a new magneto and some new carburetor gaskets. Now the engine runs very well again - and for way cheaper than had I gone to the repair shop. Thanks again - cheers!
Thanks for helping me successfully get my mower running again. Your videos are easy to follow and really informative Don! And you have a great first name, haha!
Thank you for this lesson. I have two personal pace Lawn Boys with the same Tecumseh engine. Followed your steps and both are singing. It appears they will both run another twelve years . The spiritual connection between a man and his mower is sacred.
One of the best how-to videos I've seen on RUclips - and I've viewed hundreds. Your narration was great without any fluff and editing was fantastic to match what you were doing. Excellent job and this computer nerd is ready to tackle cleaning up my mower! My girlfriend has one too, so we'll be saving hundreds in repair bills! THANKS!
Finally, a good video. Well shot and step by step instructions. Can you show how to repair a gas leaking out of the oil filter. Please show how to remove and fix.
Thank you so much. This video saved me btwn $150.00-200.00, on a repair at a service station. This was my first time taking on an engine maintenance/repair. Thanks again!
Wow Thanks. I bought one at a garage sale last year for $20, looked like new. The owner had put mixed gas in it. I changed the gas cleaned the plug and run all summer then it quit. I took it apart today and "thought" I had cleaned the carburetor. THEN I watched your video. It was those little jets in the bolt that hold the bowl on that I had missed. Very good video..
Best video I have come across on the Toro 6.5 with Tecumseh engine. thank you for your clear, patient and detailed directions, including the linkage advice. I spun my wheeels for hours untill I discovered your helpful video. Thank you. You have set a high standard for RUclips instructions, professor!
Our lawnmower had the starts and then stops after a couple seconds issue. This is our exact model, so this video was very helpful. Our issue ended up being with one of the holes in the bolt being clogged. Thanks for the detailed video which helped us a lot in fixing the issue ourselves!
I watched a ton of vids, but it was your detailed version that I used to actually attack my problem. After putting it all back together, it started with the first pull, but cut off again in 10 secs. I may just repeat the steps & try again, cause it wasn't bad at all. Thanks again.
if it's too problematic it might be better to just replace the carburetor
@@donyboy73 Thanks, I grabbed it to fix up & surprise my uncle so he wouldn't go into this new season borrowing mine. if i can't get it right today, I'll try a new carb! Thanks again.
Thank you. This got my mower back on line. The clear depiction of how the linkages connect was invaluable. Very helpful.
Same here.
Thanks man, you show step by step in your video's without missing out anything that's why i always watch your video's channels, if i only knew what sizes feeler gauge to use to set the valves clearance on a 6.5hp push mowers
I am a technology guy, and I never thought I would be able to pull the carb off and let alone fix my mower! Your teaching is excellent, granted, I wasn't as fast, but I followed the steps and now I am mowing the lawn! Great Job, and keep up the good work!
I want to thank you for the excellent step by step video. The part about cleaning the fixed jet gave me the clue I needed. Indeed it was the fixed jet that was dirty. Your clarity and completeness of instruction is a cut above. Thanks again
you're welcome
Thanks a bunch for doing this, it saved me a hundred dollars and being without the mower for a week. Cheers.
I removed the fixed jet and cleaned out the ports and it is running great again. No need to take the carburetor off. Thanks for the video.
This might be a decent video for you to make...?
After 5yrs with my lawnmower down...this video helped me fix it all by my lonesome..you deserve a like and subscribe..it was a plugged carb bolt..the three holed one had a brown jelly in it...old fuel i guess
thanks
This is an excellent, well-explained and well-filmed DIY video which enabled me to get an old, poorly-maintained Toro mower up and running again. Thanks a lot!
Great video, so detailed and clear.
My 11 years old Toro lawnmower would start but wouldn't stay on. I followed this video step by step and now my mower works like new. Thank you for sharing this video.
you're welcome
Excellent presentation sir. The shop my son kept taking his mower to didn't see that the float was half filled with gasoline. I ended up with the mower, he went with a lawn service.
WOW! Great video! Fixed my mower thanks to this video. Replaced oil, spark plug, carb bowl, carb O-Ring, primer bulb, and the air filter. My 5 year old Toro Tecumseh runs great now.
Thank you so much for taking the time to create this video.
Thank you for this video. I am a self proclaimed idiot when attempting to fix anything mechanical. I followed your instructions, and got my mower running like a dream!!! It was simple once I found a piece of wire small enough to fit in the tiny tiny holes! Thanks again
I just bought one of these used. It ran but needed a good cleaning so I disassembled it down to the block/flywheel but left the muffler on. I was having a helluva time getting the carburetor and linkage back on until I watched your video. Once I realized my mistake and took off the muffler, etc. it went back together and started up in a snap. Thank you!
Thank you so much. On this TORO Personal Pace Recycler that I just got, the linkages were not connected. You really helped me. New carb and it runs like a rocket!
Thanks for posting. First time I ever took apart a lawn mower. Very easy to follow and get the lawn mower back to original running condition.
Worked! I screwed up the linkages first time, but a quick look at the video, saw and fixed the problem and it started first pull. Thanks Don!
My lawnmower wouldn't start and my son told me I needed to take it in for repair. Instead I found this video on RUclips easily fixed it my self. All I needed to do was remove the carburetor brass jet screw, clean it, then replace it. Thank you for making and sharing this excellent video.
you're welcome, make sure you are subscribed
Thank you! I almost lit my mower on fire and went on a rampage cutting my grass with scissors. You're the best.
Great video - very clear and detailed. I have one like this that won't start. When I pulled the float bowl, there was no gas inside it. After trying everything on the video, I finally put in a new carb. There are 2 internal needle jets inside that can't be adjusted or cleaned. If their bad, the carb has to be replaced. The only recommendation I have to add is to change the gas line when you pull the tank
Just used this video to clean my lawn mower. Other than it needing a new blade, it runs perfectly fine! Thanks a lot to an excellent tutorial
From this novice to you,
Sincerely, Thank you
Thank you for this video. Excellent step by step and very good camera angles to show the process. Thanks again!
Hello!
This is a very good video post. While i was watching it another idea came to my mind. I went out put the mower on its right side so i can access the carburettor. Using 1/2 wrench i removed the cover, cleaned it and the O-ring. Then i removed the pin and took out the niddle. I didn't have carburettor spray/cleaner so i simply used deodorant spray to blow it clean.
Everything went back in place and now i can start the mower with half pull.
Thank you very much for the great post.
EXCELLENT tutorial!!! I followed every instruction step by step and I now have a running lawnmower. I cannot thank you enough for posting!!!
Thanks so much. You saved me $130 and two weeks without my mower. Started on the first pull; stayed running until I finished. So easy to follow that I watched it through once and did the full cleaning in about an hour.
My 22" Toro 6.5 HP mower with Tecumseh engine (model 20007) wouldn't start. Fresh gas wasn't enough. After watching this video, felt comfortable attempting maintenance myself. Home Depot has Toro kit (Model 20236) with new air filter, spark plug, engine oil, and gas stabilizer for $15.44. Also bought can of carburetor spray. Came home, and in less than an hour had the machine apart and back together. Video correctly identified all the parts, tools, and steps needed. Worked on the first pull!
after my tower not wanting to start for past 3 months i changed plug and filter still nothing. after seeing ur video and cleaned CARB wow it started like brand new mower. thanks!!
Yo thanks man followed u step by step mower started 1st pull did the whole yard no problems
Wow, possibly the best how-to video I've ever seen here. Great editing, clear directions, and you even included all the socket dimensions!
+Oat lord I thought the very same thing, and I appreciated the socket dimensions as well!! 5-Star video!!!
Thank you for this wonderful video, I took my carb off, cleaned it...replaced the float cup, O ring, and needle assembly. When I was done, it started right up! I also replaced a couple of things to fix my drive mechanism...although now it is always in drive...gotta figure that one out. The lawnmower also runs high, or fast constantly...working on that too. But, ITS now RUNNING! Thank you so very much!
Great video. The mower used in your vid was a different model Toro but the step by step instruction made my tune up simple. Thanks for your help.
Awesome video!!! My toro recycler 22 would start for a few seconds and sputter...I tried to clean the carburetor but ended up tightening the screw/jet too hard and broke the screw. Bought a $15 dollar replacement carburetor and replaced the whole thing. Runs better than it ever has. Thanks so much for putting this together!
Excellent Video! Very detailed and easy to understand. I searched many videos before coming to this one and, by far, this was the best.
@mrmex85 was it put away tilted up? run it for a while, may clear itself unless it is overfilled with oil
One of the best how- to's I have watched on You Tube. I was trying to get the carb off my Tecumseh engine earlier and got stuck, Your video has me ready for tomorrow and the renewed attack. Thanks
omg i cannot thank you enough my mower would run for a sec after you primed it then die so i bought new spark plug and air filter but did not fix it so i was at a loss then i watched this video took off the bowl cleaned the littler jets on the nut cleaned the bowl but it back on primed it pulled the cord and BINGO ! ran better then it ever has saved me who knows how much money for repairs i love the youtube community Thank You again for sharing you knowledge
Thanks donyboy. My brother in law had all the carb and governor linkages in the wrong holes. Once I knew the correct configuration the lawnmower runs nicely.
I did this to mower, same model, and it worked like a champ. Thanks for posting this terrific video.
Thanks, Don. Your videos have helped me out with my lawnmower carb and my repair on my friends Tecumseh starter on his snowblower.
Thank you very much, this gave me the confidence to clean the carb and now its running 100% again. i was ready to blow another 400 bucks but i can get at least another season out of this one. i beat the crap out of it and it just keeps mulching leaves, twigs grass etc..
Again, THANK YOU!!!
Thank you for the excellent tutorial, I just picked up the same lawn mower in a yard sale for $50 bucks. I will be checking everything out this weekend.
Thank you so much sir. I viewed this video and followed your instructions. That little tiny hole right below the threads was non existent on my 2006 model 20016 so i made one. Small though. The mower was not cranked since 2010 when the transmission quit working. I cleaned the plug and put in fresh fuel and she cranked up on second pull and purrs. AMAZING. My next job is to change the tranny (part no 106-3955). Can't find instructions for this model. Will use schematic. Thanks again Dony
Thank you very much for this tutorial. After watching this I was able to diagnosis my Toro mower starting problem. I followed your video step by step, and found the problem. It was old gas that was prevent it from starting. This is strange since the gas (Premium grade) is only 5-6 months old. I'm glad your video helped me fix the issue since the repair shop was going to charge me a minimum of $100 to do a standard tune up.
This was such an EXCELLENT, informative and well produced video! Thank you.
I really do miss Tecumseh, they were really a staple in outdoor power equipment history
This video is GREAT! It inspired me to clean my carb and my mower, which wouldn't start, runs better than new. Thank you very much for taking the time to make this video!!
I fixed mine today after watching the video! Great detailed video.
Thanks man!!! That little hole in the jet was the one I was missing....just got the lawn mowed before the the cold front! woohooooo!
Great video and quick fix, most cases. I'm not a small engine shop but I do have own a lawn mower and an edger - both with tecumseh engines. Even though I have rebuilt carburetors previously on my own equipment, I could have saved time and a few bucks (carb kit) had I previously found this video. I just purchased a nice used mower off of craigslist for $38 that did not run, as I suspected it was either bad gas or a dirty carb. I used the technique in this video and saved time and money, and fixed a lawn mower. With a new blade, spark plug and fresh oil, this one should sell quickly for a nice profit.
I just wanted to let u know that your videos are an order of magnatude better than any that I have seen on you tube!
Excellent video, very clear and explanatory. Good work.
Fresh gas, new plug & air filter, clean carb like in this video. Mine sat outside, uncovered for years in the Colorado winters and has been very neglected. Wouldn't even start. Did what's recommended and it runs like a champ again.
I have the exact same mower that I bought new and it ran fine year one (live in Western NY so its put in a shed for about 4 months for the winter) but year two, it ran very rough, and I believe before the end of year 2 it would not run at all. It's been sitting, untouched, for 2+ years. I'm gonna look at all these scenarios and hopefully I can get her back up and running. Great video, thanks!
This worked beautiful. Thanks so much. Saved me $160.00. Called a repair place because I had a few questions and they told me that i needed to stay off the internet. It needs to be fixed by a trained professional....What a load of crap. Thanks again!!
@TRcustomengineering the kit # is 631021b and make sure you have removed any old fuel from last year
Great video. Same issue just happened with my mower. Would have never figured out the needle placement without this vid.
This was a great video. I broke my machine down and replaced the o-ring that had corroded and it started right up! Thanks.
Thank you so much for posting this video. You are good. No extra yapping like all of the other repair videos.
bad carb, did you try kit #631021b? make sure the carb is clean
Don, thank you so much. Your explanation and demonstrations are excellent.
+tomvitale1 thanks, make sure you are subcribed
Great video. I have the same mower and would start after priming and then stop shortly after. I turned it on its side, took off that brass screw(without taking off the carburetor or anything else. I cleaned the little holes in the screw/bolt with a pin and then put it back it. After this the mower ran fine. BUT - I will do the other maintenance(spark plug, filter, carburetor cleaning) soon. Thanks for this video.
@PrairieFrost you mean the fuel line connector on the carb?
Catching up on some of your older videos. That engine is common on a lot of mowers. Everyone I have seen has a dirty governor lever like you showed. Keeping it clean is imperative to proper operation. Good job !
You went to all this trouble and didn't rebuild the carburetor?
I really wish you had, so I could see where everything goes....
Great camera work. Way better than what I've seen elsewhere.
@ahfongul the needle might be stuck. you might want to replace kit #631021b, also shake the float to make sure there is no gas inside
Great video, I fixed my lawnmower in 20 minutes. Thank You
Thanks for posting this video. I have exactly the same engine on my lawn mower and experienced the same problem as you described at the beginning. Following your instruction resolved my problem!
Your videos are great! FYI :: I have a Toro GTS that's 12 years old. Runs like a champ. I put it away properly in the Fall and come Spring it fires right up. Simple seasonal maintenance and keeping an eye on things like the air filter keeps this "Tecumsey" healthy
I have a 2 stroke Toro GTS that was not stored properly, with the fuel left in it for a very long time, and the carb was incredibly gummed up with brown tar blocking everything.
Always draining out the carb entirely for storage would have prevented it, but the previous owner never did it.
i LOVE my personal pace. wont ever get rid of it because my grandma bought it new 10 years ago and ive maintained it through the years and still do customers yards with it. does great! edit : my grandmother passed away but the mower is still with me 💙
try to keep it as long as u can because it is better built than the new ones
@@donyboy73 yea i can tell the new ones are extremely light which in a way is a good thing but on the other hand its flimsy. my old toro even has the electric start. i should slap a new battery in it and a starter solenoid if it needs it. i havent used the electric start in years. thanks for the response ✌
Awesome video. Addresses a lot of key point. This video is a better alternative than taking somewhere and waiting and waiting!
don't know the part number off hand, if you spray penetrating oil or engine fogger inside the cylinder it may help
Thank you for the details on hooking back up the wires going to the carb !!
Great video, had my mower running 30 minutes after watching.
Thanks!
Thanks donyboy73. Got my like new Craftsman Eager1 running perfect.
A $20 CraigsList find has turned this non-runner into a real productive machine.
Great video. Thank you for sharing your steps to fix the mower. I have the exact same engine on my mower and now I know what to look for. Thank you again.
I have that same mower and that is not how my primer bulb works. You have to actually press the bulb all the way in and hold for one second. There is a little mechanism that is pushed back out with a spring when you release it. Did you really just prime that bulb as shown in the video, or did you find you had to do what I have to do? I recently replaced my bulb for the 3rd time (mower is 10 years old) and I am still having some issues and I think it maybe the spring itself. Just curious if you have run into that before.
especialy does the engine get dirty if the flywheel key is broken
I love how u explain everything. Thank you. 👍👍👍
Great video