Hello Anas, I am currently working on a little project which should include some sounds, triggered by a 16 keypad TTP229 and was happy to come across your youtube channel, which I have subscribed to as well. Before others stumble over the same hurdle: There is a big error in this video: hooking up the BY-8001 16P the way your schematic shows - won't work and might fry the Sound chip. The Sound chip is upside down !! In your live video one can see the right setup. I was wondering why my test configuration didn't work AND: the BY8001 was drawing around 450..500mA in idle mode. So I checked again and again with your diagram but couldn't find a different connection in my test setup - until I followed the datasheet of the chip. Here I could find and solve the upside/down connection problem. Anyway - I like your channel.
Hello sir First thank you very much for sharing your knowledge and work I had question and I need some help I'm working on gampad project but I wanted to use ttp229 as input in i2c but for me as beginner end up failing every time I used arduino gamepadexample and my problem is for example instead pin 6 = Left function, number 8 or any desired figure = Left function Can you guide me or direct me to particular video that explains similar project with similar programming to me Thank you very much
The project circiuit and code is NOT for DFRobotDFPlayerMini!! Here the author uses a BY8001-16P MP3 Player, which is different from the DFRobot Player.
Great video! Is it possible to design this project using 16 N.O. switches instead of a touch keypad?
i am interested in a sketch made to use a MT8870 instead of the keypad anyone working on that version?
Hello Anas,
I am currently working on a little project which should include some sounds, triggered by a 16 keypad TTP229 and was happy to come across your youtube channel, which I have subscribed to as well.
Before others stumble over the same hurdle:
There is a big error in this video: hooking up the BY-8001 16P the way your schematic shows - won't work and might fry the Sound chip. The Sound chip is upside down !! In your live video one can see the right setup. I was wondering why my test configuration didn't work AND: the BY8001 was drawing around 450..500mA in idle mode. So I checked again and again with your diagram but couldn't find a different connection in my test setup - until I followed the datasheet of the chip.
Here I could find and solve the upside/down connection problem.
Anyway - I like your channel.
Thank you for the feedback. I’ll correct the circuit diagram. And thanks for subscribing.
@@AnasKuzechie I think, the same correction has to be done to all of your BY8001 Demos while the DF-Player is connected right.
Hello sir
First thank you very much for sharing your knowledge and work
I had question and I need some help
I'm working on gampad project but I wanted to use ttp229 as input in i2c but for me as beginner end up failing every time
I used arduino gamepadexample and my problem is for example instead pin 6 = Left function, number 8 or any desired figure = Left function
Can you guide me or direct me to particular video that explains similar project with similar programming to me
Thank you very much
يتعذر التعليق لا أعلم .
code not working . .. . . error be like : class DFRobotDFPlayerMini' has no member named 'setup'; did you mean 'stop'?
The project circiuit and code is NOT for DFRobotDFPlayerMini!! Here the author uses a BY8001-16P MP3 Player, which is different from the DFRobot Player.