Well I was waiting for it brand new Yukon denali tail light went out so I'm buying a set of the same ones you just put on your car thank you for putting this video out it is very helpful
Thanks for sharing your video. I installed a set of these lights on my 2015 Yukon Denali; however, I have hyperflashing with the left turn signal. It (left turn) blinks normal for about 5 seconds, then goes into hyperflash. Can you advise a fix for this? The right turn signal works fine. Thanks in advance for any assistance given👍🏽
Man I just installed these on my 16’ Yukon XL Denali. Got the driver side in. Checked lights and all is well. Finished that side up then moved to the passenger side. Went to go check lights then both lights cut out. Fuses are good. I’m at a lost. Looks so damn good to against the black paint.
Did you figure it out? What if you leave the passenger side light with the original one - do they both work now? Or just try the driver side Escalade light with out the passenger side connected. May have a defective LED light.
I have the same Taillights but smoked out on my black 09 tahoe it compliments the hole car with my tinted windows and aftermarket led headlights. Also, I'ved installed starlights on the headliner and cover all bowtie emblems Black. Couldn't be happier!
Those lights represent the two L's in Cadillac that's why they put them on there'. And if you look at most Cadillac cars especiall if you !look at something they don't make any more.
A lady just delivered an Amazon package to my house. I saw the front of the Yukon say GMC then when she pulled out I saw the Escalade taillights and I was like wait what? Now I understand. Very cool.
How are the reverse lights? I’m thinking about buying these but it looks like I might have to buy brighter led reverse lights to put inside of the Escalade lights…
Just Installed these today. Will work on the trim pieces tomorrow…that part always gets me so I figured I would do them with a clear mind…they do take the Yukon XL to level it should have been already. Next the headlights will get their upgrade!
Watching this at 3 am I got work at 7 I don’t own a GMC Yukon
Lmaooo😂
Okay the tail lights have been in for two years How have they held up any fading or yellowing of the lenses
How are these holding up after a couple of years installed?
Well I was waiting for it brand new Yukon denali tail light went out so I'm buying a set of the same ones you just put on your car thank you for putting this video out it is very helpful
Man you doing a great job with these vids can’t wait till you get big. You got great potential and video quality nice job 👍
Are the lights still functioning properly?
How does these Chinese products holding on after at least 2 yrs?
I've made the same change but the right indicator sticks to me
I so wished they would have put them lights on the 2021 models
Ikr
Back in 2014, I remembered seeing a custom white 2015 Chevrolet Suburban LTZ with 2015 Cadillac Escalade tail lights
I just ordered a set of those escalade style tail lights and I can't figure out how to put them on even after watching tutorial vids😂😂😂😂
Thanks for the great video it’s makes that Yukon look how it should have from the factory 😎 top shelf up grade
Thanks for sharing your video. I installed a set of these lights on my 2015 Yukon Denali; however, I have hyperflashing with the left turn signal. It (left turn) blinks normal for about 5 seconds, then goes into hyperflash. Can you advise a fix for this? The right turn signal works fine.
Thanks in advance for any assistance given👍🏽
Man I just installed these on my 16’ Yukon XL Denali. Got the driver side in. Checked lights and all is well. Finished that side up then moved to the passenger side. Went to go check lights then both lights cut out. Fuses are good. I’m at a lost. Looks so damn good to against the black paint.
I'm kind of stuck with you on this one. Tried doing some research to see if anyone else had this issue but I got nowhere.
@@GroovyFleet I appreciate it brother. 🙏🏽
Did you figure it out? What if you leave the passenger side light with the original one - do they both work now? Or just try the driver side Escalade light with out the passenger side connected. May have a defective LED light.
Hello where did you buy it? Can you put link to this lamp?
Link is in the description
I love them...Thanks!!!
Very helpful and detailed. Well done thanks
That looks so hot 🔥 I'm getting ready to do this conversion on my Suburban LTZ. Thanks for sharing. It looks pretty straightforward.
This video was simple and to the point, I really enjoyed it boss!
Tahoe Escalade tail light conversion seems easier than the Yukon conversion. Also, what years does this conversion apply to?
2015-2020
I have the same Taillights but smoked out on my black 09 tahoe it compliments the hole car with my tinted windows and aftermarket led headlights.
Also, I'ved installed starlights on the headliner and cover all bowtie emblems Black. Couldn't be happier!
How is this allowed
Am i the only one who thinks these lights belong on Escalades and Escalades only lol
Just bought and installed these lights on my Yukon, thanks for the video, it made my installation a whole lot easier!
Planning on buying them lights are they worth it
@@alfonsogaona6781 Yes. So far I got no complaints.
So cool!!!!! I didn’t know that was possible!!!!!! Good video 👌👍👍👍👍
Nice
It,s looks pretty dope on the yukon but on the chevy tahoe it a big no.
I agree with this one
Those lights represent the two L's in Cadillac that's why they put them on there'. And if you look at most Cadillac cars especiall if you !look at something they don't make any more.
A lady just delivered an Amazon package to my house. I saw the front of the Yukon say GMC then when she pulled out I saw the Escalade taillights and I was like wait what? Now I understand. Very cool.
Dat 350Z takin off in the background had me dyin.. typical island boi shit smh🤦♂️
🔥🔥🔥
How are the reverse lights? I’m thinking about buying these but it looks like I might have to buy brighter led reverse lights to put inside of the Escalade lights…
I FOUND SOME BY MOSTPLUS but the only have them up to 2018 mines is a 2019
Do u have a link to these lights ? I want the yellow turn signal . But only find the ones that are all red on eBay
thanks for taking the time to make this video brother!
Just Installed these today. Will work on the trim pieces tomorrow…that part always gets me so I figured I would do them with a clear mind…they do take the Yukon XL to level it should have been already. Next the headlights will get their upgrade!
I have a '17 Yukon XL I may do this to. Nice video and explanations in it.
Your video was really helpful thank you..
I got me a set this year for my 07 Yukon I love it just plug and play looks good to I give it 5 stars.
Thank you so much I was able to change my lights today took me about 30 mins
You got a Borla exhaust on it? I see the tip is not stock.
How do you hook up a back up camera to these lights? I need to tap the reverse wire
What year do I order the taillights off of
🔥🔥🔥
thanks bruh...good video
Great job on the video.
Nice video, gonna do this mod soon.
Gracias hermano 👍🏻
De nada!
Badass bro 😎 looks sickk
So this will work on yukon denali 2016? Great video by the way..
As long as its the same body style it should work
Hi, do u sell the original tail light ?
what year is your yukon
Did it fit perfectly when you closed the door???any rubbing against the light?
Nope. Fits just like it was factory.
So damn fire
What’s the name of the manufacturer of the light you put on
Link is in the description
Nice work
Bro is this original tali light..
Send me a link if you have,thanks
That is an aftermarket. Link is in the description
Niceeeeeee
Looking sharp
What brand are those tail lights and have you had any issues with them?
No problems at all. Still going strong. Link is in the description for the lights.
I just installed these lights and they don’t seat flush when looking from the side of the truck. Do you have this issue??
I would make sure that the yellow tabs are still in the truck when you took the old upper piece out.
@@GroovyFleet yes they are. There’s still a gap between them. Not terrible but I guess that what you get with after market stuff.
Looks good!
Did you have to install the included ballast?
There was no ballast for these lights.
are those the clear version or the blacked out?
Those are the clear versions
Will this fit on my 2014 Yukon?
What year Yukon is this?
2016
Where did you purchase these?
Caleb Boyes I got them from amazon
What’s link to taillights?
Link is in the description!
what year is this car??
2016
Really cool upgrade! Thanks for the idea. What year Yukon are you working on?
That's a 2016
Okay thank you. Just ordered it 2021 Yukon Denali. I hope they'll fit on that
@@stingrayatthelake1163 lol you bored dawgg? 2021 a whole different box b.
💯
Are those the tinted ones?
Any update? Are they still working and going strong?
Still going strong like the day I put them in. No issues.
@@GroovyFleet I'm about to do mine right now...got the smoked ones.
@@MrDulvalius69 just bought a Denali with the smoked Escalade lights. The previous owner did it. I absolutely love them
@@GroovyFleet I bought some aftermarket taillights for my Ram and some of the led lights went out. Hopefully yours stay strong
👏🏾👏🏾
Did you have any trouble with the electronics or the lift gate after the install of the lights?
No trouble at all. Everything works as it should.
Why though its not an Escalade? Seems tacky
Done it ! Thx man!!