I wish Siser would make a good heat press. Their machines look so dated. If they had a 15x15 slide out, that had a good interface I’d buy it immediately.
Thank you for this video! When I looked at the info on this product on one of your distributor's pages, it said layering was not recommended. So I'm glad to hear we can! I have one additional question about layering. Can you layer one Siser DTV image on top of another Siser DTV image?
I have all I need except time, I have had Kaiden my great grandson for several days due to be picked up tomorrow afternoon. It was so much fun! He is 14 months old and can't crawl yet, his therapists said he is delayed but will get there. He may need leg braces we don't care, Whatever it takes! Please keep him in your prayers.
@@SiserNorthAmerica thank you I don’t need to peel it. I’m pressing it onto the T-shirt with easy press. But it doesn’t stay on the edges peel away but the middle is ok
My only problem was my cricut cut through the clear backing too. When I tried to get it off the first time, it ruined my vinyl. All my fault! Once I got the hang of it! I absolutely fell in love!
It technically can, for the initial application....but, EasyColor DTV is not recommended to go on mugs. It will more than likely not last after you wash it
Take a fine sharpie and very very carefully darken your registration lines sometimes they’re so faint the machine can’t read them the sharpie works like a charm
@@SiserNorthAmerica A lot of people have been posting in various facebook groups that the images have faded badly and are wrinkling after washing and dryer. This is very disappointing because you originally said it washes beautifully. What have you learned since the very beginning about washing & drying.
@@buddysmith7080 The fading is usually due to heavy saturation on the print and the ink not properly drying before the garment is laundered. Also, third party inks do not always work cohesively with the EasyColor. As for the wrinkling, EasyColor is extremely thin and takes the shape of the garment. As your garment wrinkles in the wash/dryer, as will the transfer. This can be remedied by simply ironing out your garment/transfer with a home iron and the wrinkles will settle. Please feel free to reach out to our Tech Support by emailing Support@siserna.com and we can any questions you may have about this topic. :)
A lot of people have been posting in various facebook groups that the images have faded badly and are wrinkling after washing and dryer. This is very disappointing because you originally said it washes beautifully. What have you learned since the very beginning about washing & drying.
hi from Montana thanks for doing your video. question is there anything u can use if u dont have the tdd mask they are sold out everytime i need it lol
I know this is late (not during the live, I am just watching it), do you sell off of Siser website directly or do you have to buy from a dealer, such as Michaels or Joanns ect.
We do not sell direct.... Michaels and Joanns will have this product in about October.... you can also email us at info@siserna.com and we can let you know where your nearest authorized Siser distributor is located
I hope you see my question. I tried your color dtv for the first time and it was great. However, the image I did was a white ghost and after I pressed it on a black shirt the ghost turned light grey. Did I do something wrong?
This sounds like you may have had dye migration from the application. Please contact our Tech Support by emailing Support@siserna.com and we can help you out with this :)
They are similar in functionality....other than the differences in the inks that are used on them. EasyColor DTV is used with inkjet and our other Digital Media is used with EcoSolvent, Solvent, or Latex inks
I love this video. One comment though, you always mention a couple of cutting machines. Why don't you ever mention Scan n Cut. Its a great machine and many of us have them. There are few videos with it and most of these products since most of them are sponsored by the other co. You aren't, as far as I know so how about including us. thanks and keep up the great videos
Hello Judy! I (Joe) do not use the scan n cut often. Or really anyone in our office, so we arent as familiarized with that, but we will try and find out the best process for the and include it for the future content
@@SiserNorthAmerica Thank you. I love it, it has different blades and for quite a while now, they have the auto blade where it figures out what dept to cut the design, fabric, etc. It does a good job at it. and, I don't have to have a computer unless I want to. Keep up with the videos, they help so much. Thank you again.
@@ruthybarretta7955 the world is rude. It is not rude when you can better your video. This is RUclips, keep don't have all day to video. Videos should be made to the point so audience will not detour from your platform.
sorry you feel that way.... I like to make sure I am as thorough as I can with our products and make sure people that have questions leave feeling a bit more confident with the experience.
We need larger paper sizes!! 11x17 and 13x19!!
hopefully in the near future!
The future is now! Yes to the new sizes thank you
I wish Siser would make a good heat press. Their machines look so dated. If they had a 15x15 slide out, that had a good interface I’d buy it immediately.
Nicccce❤
Thank you for this video! When I looked at the info on this product on one of your distributor's pages, it said layering was not recommended. So I'm glad to hear we can! I have one additional question about layering. Can you layer one Siser DTV image on top of another Siser DTV image?
Yes you can!
I tried my DTV but did not use a mask. The butcher paper partially stuck to the iron on and ruined it. Any suggestions? Thank you
I have all I need except time, I have had Kaiden my great grandson for several days due to be picked up tomorrow afternoon. It was so much fun! He is 14 months old and can't crawl yet, his therapists said he is delayed but will get there. He may need leg braces we don't care, Whatever it takes! Please keep him in your prayers.
Where do I find the designs to send to printer? Sounds crazy, I know
You can buy artwork from a ton of different sources on the internet.... Etsy is a great spot to purchase SVGs as well
Some get this guy a mic so he doesn’t have to yell!
Hi I am using circuit maker machine for cutting does the app work with the circuit maker ❤️❤️❤️ thank u
If you scroll down on this website page, you will see the cut setting recommendations for the Maker
www.siserna.com/easycolor/
Love how easy it looks. Stephanie you flower came out with less detail and did not do the electric HTV justice. But from a distance it’s cute.
Common sense if they just did it it needs to dry more
How do you get it to look vibrant? I'm using epson 2720. Mine is coming out dull looking.
please reach out to our Tech Support by emailing support@siserna.com
#replay, love this products , waiting for easycolor to get here
So exciting!
Directvto vinyl
I have a canon printer and every time I print the dtv the colors comes out wet, and the picture is very fuzzy there
please email our Tech Support at Support@siserna.com and we will try to figure out what is going on. It is most likely a settings issue.
I’m using easy press 340f for 25seconds but the edges didn’t stick to the cotton
If you let it cool for a few seconds then that should allow for the adhesive to cool enough for you to peel :)
@@SiserNorthAmerica thank you I don’t need to peel it. I’m pressing it onto the T-shirt with easy press. But it doesn’t stay on the edges peel away but the middle is ok
About how many washes is this good for?. Before fading,cracking or peeling starts...give or take?
My only problem was my cricut cut through the clear backing too. When I tried to get it off the first time, it ruined my vinyl. All my fault!
Once I got the hang of it! I absolutely fell in love!
Hi, where can I find the glossy teflon sheet?
please email us at info@siserna.com and we can let you know who sells them :)
Hi will the easy color dtv come in larger sheets soon?
Distributors are stocking larger sizes as we speak!
I am sorry siser easy color DTV can it be used in a mug press
It technically can, for the initial application....but, EasyColor DTV is not recommended to go on mugs. It will more than likely not last after you wash it
is there anything u can use if u dont have a mask
Great question. Hope they answer. But I think he said in another video that you can use the none shiney side of parchment paper.
Hello I was watching your video on the siser easyweed DTV. I would like to know if I can use the sister easyweed DTV on a mug in my mug press?
Why am I getting white lines around some of my design after I do my print and cut.
Your registration may not be correct.
Take a fine sharpie and very very carefully darken your registration lines sometimes they’re so faint the machine can’t read them the sharpie works like a charm
Can this be layered on with your other products?!
Yes
So I can lay this down first ND place another layer on top of it then?
I am excited to try this for Christmas presents for my family. They both turned out great. Thank you.
Can someone from SiserNorthAmerica please respond to my question below.
what was your question?
@@SiserNorthAmerica A lot of people have been posting in various facebook groups that the images have faded badly and are wrinkling after washing and dryer. This is very disappointing because you originally said it washes beautifully. What have you learned since the very beginning about washing & drying.
@@buddysmith7080 The fading is usually due to heavy saturation on the print and the ink not properly drying before the garment is laundered. Also, third party inks do not always work cohesively with the EasyColor.
As for the wrinkling, EasyColor is extremely thin and takes the shape of the garment. As your garment wrinkles in the wash/dryer, as will the transfer. This can be remedied by simply ironing out your garment/transfer with a home iron and the wrinkles will settle.
Please feel free to reach out to our Tech Support by emailing Support@siserna.com and we can any questions you may have about this topic. :)
@@SiserNorthAmerica What do you mean third party inks. I use and Epson printer with Epson inks.
@@buddysmith7080 You're saturation on your print may be too high then. Have you tried printing with the: Plain Paper/Normal setting?
Of you decide to change the finish after washing, how long do you press?
just about 5-10 seconds
@@SiserNorthAmerica thank you!!
A lot of people have been posting in various facebook groups that the images have faded badly and are wrinkling after washing and dryer. This is very disappointing because you originally said it washes beautifully. What have you learned since the very beginning about washing & drying.
He said he does it but it’s not recommended to put it in the dryer and wash it inside out
hi from Montana thanks for doing your video. question is there anything u can use if u dont have the tdd mask they are sold out everytime i need it lol
HELLO good afternoon I was wondering what cut setting should my machine be on I have a cricut maker?
We have our recommended cut settings over on our website
www.siserna.com/easycolor/
Do sublimation inks work on that? Maybe print with sublimation inks on it and press.
Use easysubli for that
EasyColor is not recommended for sublimation inks... you can use EasySubli for sublimation
I use sublimation ink yesterday and came out fabulous
@@bethalvarez6956 with EasyColor or EasySubli?
I know this is late (not during the live, I am just watching it), do you sell off of Siser website directly or do you have to buy from a dealer, such as Michaels or Joanns ect.
We do not sell direct.... Michaels and Joanns will have this product in about October.... you can also email us at info@siserna.com and we can let you know where your nearest authorized Siser distributor is located
You could put it on cool fluff after it’s almost all dry
I hope you see my question. I tried your color dtv for the first time and it was great. However, the image I did was a white ghost and after I pressed it on a black shirt the ghost turned light grey. Did I do something wrong?
This sounds like you may have had dye migration from the application.
Please contact our Tech Support by emailing Support@siserna.com and we can help you out with this :)
Can you explain the difference between Printable vinyl and DTV?
They are similar in functionality....other than the differences in the inks that are used on them.
EasyColor DTV is used with inkjet and our other Digital Media is used with EcoSolvent, Solvent, or Latex inks
Love the content as always.... One question, Can I use this product with my eco solvent printer
Thank you! We are still doing tests on EcoSolvent and it has been successful....but, we dont have EasyColor in rolls yet.
Hi if i use a Iron can i sale the T-shirt
You can! but it is important to make sure you applied your transfer as thoroughly as you can.
@@SiserNorthAmerica thank you
Another great video!! Thank you!!
💖🏵🌺🌼🌹🌻🌸💐🌷💖
Thank you so much!
Easy Color looks awesome. Can it be used on uneven fabrics like waffle fabric dish towels, or can it only be used on smooth surfaces?
I dont want to say "no", but you may run into uneven application, which could cause the transfer to peel up.
Do you know which are the best serious for an Epson eco-tank so the color don’t fate thanks
Please email our tech support at support@siserna.com
Direct to vinyl lol
Love how they both came out. Thank you for this Tutorial! 💖💖💖💖👍
You are very welcome!
Love these tutorials! Just wish you wouldn’t yell!
sorry....just excited :)
Direct to vinyl
I love this video. One comment though, you always mention a couple of cutting machines. Why don't you ever mention Scan n Cut. Its a great machine and many of us have them. There are few videos with it and most of these products since most of them are sponsored by the other co. You aren't, as far as I know so how about including us. thanks and keep up the great videos
Hello Judy! I (Joe) do not use the scan n cut often. Or really anyone in our office, so we arent as familiarized with that, but we will try and find out the best process for the and include it for the future content
@@SiserNorthAmerica Thank you. I love it, it has different blades and for quite a while now, they have the auto blade where it figures out what dept to cut the design, fabric, etc. It does a good job at it. and, I don't have to have a computer unless I want to. Keep up with the videos, they help so much. Thank you again.
Love it!!!!
Hi, is safe to use EasyColor on baby clothes ?
yes!
Do you have to mirror your image to print on a white tshirt?
You do not mirror your image when printing on EasyColor DTV!
I have all the materials so now to try it out today! Soooo excited! Thank you guys for all your information ❤️
You're very welcome!
Will there be bigger sheets???
We hope so!
love it!
Can you use laser printer?
We have seen success on a laser printer!
Such a great demo on this "magical" product!
now its time for you to try it out!
How do we use the SNC sdx to cut DTV
please reach out to our Tech Support by emailing support@siserna.com
Love these videos the only thing is most of the time I can’t hear the ?
Ill try to be sure to read back the question before answering
@@SiserNorthAmerica it’s ok could be me no worries most of the time I can figure it out
Great info.
thank you!
This guy talks so so much, plus at the beginning...just get to the point and demonstrate. Overall great video
How rude
@@ruthybarretta7955 the world is rude. It is not rude when you can better your video. This is RUclips, keep don't have all day to video. Videos should be made to the point so audience will not detour from your platform.
sorry you feel that way.... I like to make sure I am as thorough as I can with our products and make sure people that have questions leave feeling a bit more confident with the experience.
He is just giving the necessary information, leave him alone