Many forget to remove the stock air clear support at the back, so the new replacement will fit properly. In some instances you have to take off the tank to get at the bolts.
Thanks for watching and for the money yes I love them I don’t bottom out anymore it rides like a totally different bike I recommend them I would appreciate it if you would subscribe really helps thank you
@@capecodbiker9902 Thanks for getting back to me. You’ve had no issues using just the washers? I’m asking because I ordered one yesterday that says it fits my 2010 FLHTK. Just watched your video today to find out any issues I might run into. You’ve been very helpful.
Orale wat up Homie, thanks for posting a video about that, I've seen the anodized color tarnish to a green color over time, hopefully yrs doesn't do that, love the bike I have the same bike same color, everything I have on my bike is not China made, well I mean the aftermarket stuff I've gotten I'm sure there's China made stuff for Harley, nothing I can do about that, but I try to get USA made or made anywhere else but China.. but yr bike looking good Homie.. 👍 Cee U On The Road.
Exactly. I tried the exact same filter, and not Roland Sands. Cost 100 bucks. Everything looked exact until I tried to install the breather bolts. They were too big, even though it was supposed to be an exact match. Plus there were no instructions, or extra seals. Fortunately it was just a matter of sending it back. Sometimes if it looks or sounds too good to be true it usually is.
It runs much better it sucks. A lot more air in then the se one I just got it Dino tuned. She’s running top notch with the 30/30 cam and that cleaner I ordered a nice k&n air cleaner to but in that one to replace the cheep one 🔥🔥🔥🔥thanks for watching
No the Open face definitely flows better you can literally hear it sucking them the screaming eagle oval I changed it to a screaming eagle extreme flow since this video
Alright, let’s unpack this ….. first off WTF HAPPENED THAT A COP PULLED OUT IN FRONT OF YOU AND YOU DON’T TELL THAT STORY??!! Why isn’t that covered under the cops insurance?? How’s you get the tank off? Would you post links to other videos that you might have watched to take the tank off? I have a street glide and I want to replace the spark plugs and wires but I need to take off the tank to get to that stuff. And, the thing about the knock-off cheap stuff from China, in the long run we’re only F’ing ourselves and our country by saving a few bucks man! I have mixed feelings about it but we are all witnessing how China is dogging us in every way with our jobs, our products, and they don’t care about copyright infringement. Plus how they F’d the world with this virus and bought this dummy and his kid in the whitehouse….. rant sorry. But it looks awesome and I’m going to take a look at the Rolland sands product for the Softail Slim I have. It’s a mean look for that bike. Can’t wait to see the powervision setup you have running and when you get the cam work done! Nice ride brother!
What up bud thanks for watching and commenting I am going to buy the good air cleaner but I wanted to see how it looked you know. I with you on the china thing. I will do a video just for you how to take the tank off it’s really really easy. The cam is going in this week I got the exhaust off and started job already. The hardest part on the tank is the fuel line. But it’s not that bad
Many forget to remove the stock air clear support at the back, so the new replacement will fit properly. In some instances you have to take off the tank to get at the bolts.
Off subject but you installed drag specialties shocks on your bike how did the ride come out r u happy with the shocks
Thanks for watching and for the money yes I love them I don’t bottom out anymore it rides like a totally different bike I recommend them I would appreciate it if you would subscribe really helps thank you
That casing looks good.. I think I would look for a KN high flo filter and call it a day🤙🏼
Lol I just ordered one smart people think alike 👍🏻
What filter did you order that works with it?
I have a 2021 Electria Glide standard with a 107, wonder if it would fit it?
Yes it would
Thank you
Instead of a stainless washers could you use “O” rings or rubber flat washers?
I don’t think. There enough gape we’re it would push in the manifold and crack something
@@capecodbiker9902 Thanks for getting back to me. You’ve had no issues using just the washers? I’m asking because I ordered one yesterday that says it fits my 2010 FLHTK. Just watched your video today to find out any issues I might run into. You’ve been very helpful.
@@coreycallahan7443 thanks for watching and no I’ve had no issues at all
External Breather. You and your bike will be glad you did.
Do you still have the stock air cleaner? Or I should say the screaming eagle one?
No I have a extreme flow round one though
E mail mail me if you’re interested. Carlosgomes5786@gmail.com
Orale wat up Homie, thanks for posting a video about that, I've seen the anodized color tarnish to a green color over time, hopefully yrs doesn't do that, love the bike I have the same bike same color, everything I have on my bike is not China made, well I mean the aftermarket stuff I've gotten I'm sure there's China made stuff for Harley, nothing I can do about that, but I try to get USA made or made anywhere else but China.. but yr bike looking good Homie.. 👍
Cee U On The Road.
Thanks bud ya it’s was kinda. A test to see if I like it I’ll. Get a good one once this one starts messing up thank you for watching and commenting 🤙🏻
Does it sound like an egg beater or something weird at idle?
Any open face filter sounds weird you can hear the air going into the engine a lot more it’s kind of a pop sound
Knock off of Roland Sands.
Exactly. I tried the exact same filter, and not Roland Sands. Cost 100 bucks. Everything looked exact until I tried to install the breather bolts. They were too big, even though it was supposed to be an exact match. Plus there were no instructions, or extra seals. Fortunately it was just a matter of sending it back. Sometimes if it looks or sounds too good to be true it usually is.
but how does it run ?lol looks good tho. if it was me i would leave the screamin eagle
It runs much better it sucks. A lot more air in then the se one I just got it Dino tuned. She’s running top notch with the 30/30 cam and that cleaner I ordered a nice k&n air cleaner to but in that one to replace the cheep one 🔥🔥🔥🔥thanks for watching
That stock air cleaner probably flows better.
No the Open face definitely flows better you can literally hear it sucking them the screaming eagle oval I changed it to a screaming eagle extreme flow since this video
I bought one similar, junk and no response from seller
I guess it’s a hit or miss with that cheap stuff mine was not bad. I since then got a good one
Cop pulled out in you then shouldn’t that be an insurance cla
They wouldn’t pay for it and it’s a 500 deductible that’s how much the fender is
@@capecodbiker9902 have your insurance go after them. Why are u backing down?
@@IndiansAuto I should of I know it’s been too long now that happened like 5 months ago
Alright, let’s unpack this ….. first off WTF HAPPENED THAT A COP PULLED OUT IN FRONT OF YOU AND YOU DON’T TELL THAT STORY??!!
Why isn’t that covered under the cops insurance??
How’s you get the tank off? Would you post links to other videos that you might have watched to take the tank off? I have a street glide and I want to replace the spark plugs and wires but I need to take off the tank to get to that stuff.
And, the thing about the knock-off cheap stuff from China, in the long run we’re only F’ing ourselves and our country by saving a few bucks man! I have mixed feelings about it but we are all witnessing how China is dogging us in every way with our jobs, our products, and they don’t care about copyright infringement. Plus how they F’d the world with this virus and bought this dummy and his kid in the whitehouse….. rant sorry.
But it looks awesome and I’m going to take a look at the Rolland sands product for the Softail Slim I have. It’s a mean look for that bike.
Can’t wait to see the powervision setup you have running and when you get the cam work done!
Nice ride brother!
What up bud thanks for watching and commenting I am going to buy the good air cleaner but I wanted to see how it looked you know. I with you on the china thing. I will do a video just for you how to take the tank off it’s really really easy. The cam is going in this week I got the exhaust off and started job already. The hardest part on the tank is the fuel line. But it’s not that bad
Rolland sands products all built in China. Been in the factory :)