JOHN DEERE GATOR FRONT AXLE INSTALL -$200 easy fix
HTML-код
- Опубликовано: 27 авг 2024
- Save yourself $600+ by fixing yourself! We changed out the right front axle on this 2013 825i in under 10 minutes for $200 at home. Bought my axle from eBay for $199.95. Proceed at your own risk..
This is killer guys. You totally rock. We're doing this on our 850D. Front left is making a super angry noise when loaded up on hard right turn. Thought it was more like an ATV CV joint with a retaining clip in there. Nope! Whole thing comes out. Wouldn't have figured that out without your vid. Thanks, guys.
I just did the same job, dang I wish I had a lift. Funny you guys say how easy it is to pop loose the ball joint on "new stuff" its a shame John Deere built such a weak vehicle. FYI I didnt need to take loose the shock, might save ya some time next time. Like the video fellas.
Good Video Guys. I just replaced both front axles on my 2007 850D, cost $104 US ea thru ebay, $361.00 CAD delivered to my doorstep here in BC, local JD dealer wanted over $860.00 ea !! Took me the better part of a weekend to install both but did xtra maintenance incld'g replacing all ball joints . Not a fan of using a crescent wrench on much but ya did kick my butt on 7 mins!
Thanks so much for this video guys! I cannot wait til the part comes in the mail. This video has given me all the confidence needed to knock this job out! Many Thanks!!!!
Just did the front left on my 2011 XUV 625i (pretty much the same as the 825i). It went pretty smooth, the only issue was separating the upper and lower control arms. I used a puller to get them apart.
I repacked the CV joints and replaced the CV boots on the prop shaft last winter. The replacement was far easier than the repair!!
Great video guys.....JD wanted $200 just for the outer CV joint and boot....ridiculous......I found it for $125 for the whole half shaft online. You saved me a ton of money!
Thanks for the video! Just done the job on my 19 XUV 825m s4. Took less than 20 minutes! Got mine off eBay for $120 for a pair from caltrix
Y’all make it look easy!! Thank you.
Tons of help! You saved me a ton of money
It is MUCH easier to remove axle nut and hub/disk as well as bottomed ball joint by leaving top shock on. It holds everything and doesn't have to come off.
With a little forethought the new axle could have been readily available to install. A minimal amount of lube would have been lost and a lot less wasted. Nonetheless, it’s helpful for most unfamiliar with the process.
Liked video,but had problem getting bottom ball joint off. Put shock back on and it came right off. Didn’t need to remove bolt on shock.
Where did you order that axle from? I just busted the same side on the same year and model. Thanks and good video.
prices coming down
Do you have a video on how to repair leaky rear end where the drive shaft comes out of a John Deere Gator XUV 620i 4 Wheel Drive? Thanks
+Joe Wiess No sorry
Nope....busted up, not just boot leak.
Do u have a part number for cheaper shocks then 200 each from John dear
Nope....aftermarket lol
yeah and they are not cheap
I bought it at a John Deere dealership and it cost $250.
You could have just cleaned up that axle, repacked with grease and replaced the boot for 29$...js
nope....sorry
do you have a video of replacing an RSX 850i front axle
+rugby no I dont
+Brian Eades axle for rsx850i is 300 dollars at the jd dealership
+Brian Eades I just wonder if axle from a different brand would fit it
You two idiots might want to put a drip pan to catch front gear oil before you remove axle. Amature hour.
$100 (Amazon) easy fix
Iya ya Allah.