Step by Step Guide to Flash Micropython Firmware on A9G Board
HTML-код
- Опубликовано: 21 июл 2024
- In this video, I have shown the complete step by step process to flash Micropython firmware on A9G board so that we can use that board directly without any external microcontroller.
Not only that, I have also shown how to flash the AT commands firmware back in case you want to go back
Get a free trial of the world's most trusted PCB design software, Altium Designer with 365 and 25% off your purchase: www.altium.com/yt/techiesms
Free search engine for the best quality components from Octopart: www.octopart.com
__________________________________________________________
👨🏻💻 Important Links 👨🏻💻
All Important links and complete steps for firmware flashing are provided in this article - www.techiesms.com/steps-for-f...
Buy A9G Board - www.techiesms.com/product/ai-...
Buy Smallest TTL Programmer - www.techiesms.com/product/sma...
__________________________________________________________
You can now buy Electronic Components & IOT projects from www.techiesms.com
__________________________________________________________
⏱ Time Stamps ⏱
00:00 Introduction
02:00 Steps for Flashing Micropython Firmware on A9G Board
06:00 Testing A9G Board with Micropython
06:48 LED Blinking example on A9G board using Micropython
09:59 Steps for Flashing AT Commands Firmware back on A9G Board
11:05 Testing A9G Board with AT Commands
11:33 Looking forward to make more videos on A9G with Micropython
__________________________________________________________
🎥 🎙 My Video Gear 🎙🎥
Camera - Canon 750d
Lens - 50mm f/1.8 STM Lens (amzn.to/32gqnsi), 24mm f/2.6
Key Light - Godox SL60W (amzn.to/3522mHe)
Fill Light/Back Light - Osaka Lightning Setup (amzn.to/2I5cdDi)
Tripod - amzn.to/3uNhC4H
Microphone - Zoom H1N(amzn.to/3Osh12A)
Editing - Final Cut Pro X on MacBook Pro ( amzn.to/3vHcSyJ )
__________________________________________________________
Get connected with techiesms everywhere..
Subscribe Main Channel :- bit.ly/techiesms_youtube
Subscribe Shorts Channel :- bit.ly/techiesms_shorts
Facebook :- / techiesms
Twitter :- / imtechiesms
Instagram :- / techiesms
Website :- www.techiesms.com
Telegram - @techiesms
__________________________________________________________
techiesms
explore | learn | shared 
Наука
Techiesms... You videos are top-notch. You've been a great teacher and mentor. I realise that my A9G flashes both on board LEDs and when I connect it to a serial software, it print information on the screen and doesn't respond to AT commands on Arduino
Very nice tutorial ! After ironing out a few quirks of the burning tool, I managed to install Micropython on the chip ! Very eager to test it out !
Thanks for this nice tutorial!! I’m looking forward to the next tutorials!
Great 👍🏻 , we need more videos about micropython, thank you so much !!
As always an informative tutorial
Thanks a lot for sharing this tutorial. A9G is a very good (a little bad) module. Can we use installed TF card on module to save gps data?
Thumbnail is amazing 😆
Thanks
Excellent Video, Please advice how to use Micro Python with the A9G for GPS tracking application? and to send to thingspeak?
Dear
Could you make a video using servo motor on esp32 rainmaker no one has done it yet.
I count on your tutorials they are incredible excellent
Thank you very much
Man , really great video, can you please make a video about how to use I2C on this board?? it would be fantastic. Thank you for your videos!
Couldn´t winf firmware_debug_full.lod file, please, where can we find it?
Very useful 🎉😊
Great video! I seem to have trouble finding the link to the firmware files (3.58 0n video). Kindly guide me on the link to the files
Cannot find links from where I can download firmware_debug_full.lod or firmware_debug_flash.lod, neither in the tutorial (link from the video description) nor on the internet. Help wanted
hi,were you able to solve it?, i need that too
Hi, does any one knows "go to that page (for the firmware files) " where it is because I can not find it. Although very good tutorial
I have tried following the instructions to flash the firmware, "but before opening this we need to do two more steps", we have to visit what page to get the firmware? The article skips this firmware download portion of the video. Please share the page link.
✨✨ amazing i will try to make it.♥️♥️
Best of luck
That Board is a real Underdog!
do you know if this runs over Cardputer M5Stack? Because the mine stop after a brock upload in M5 Burner
Nice video nice presentation sir .please clarify me how much code memory it have sir?
Hello techiesms, do you know which accelerometer is compatible with this card, I would like to add it
Sir may you make a project using NODEMCU that can control home appliances with the help of ALEXA, BLYNK APP, IR and MANUAL Switches
am on Linux(Archlinux) am having trouble compiling CSDTK, any ideas?
Im install in my a9g module asper your instruction. But when i save the file inside a9g module , used thony, i cant show lib folder in root path. What a problem . But i see your thony, show that library folder.
What is the secret in this instruction.
Please tell about it. How to solve it. And sime times the module will be hang, till reset.
does anyone have a link to the 2 firmware files cant find them anywhere, please help :/
we can do this in linux ?
I'm using ubuntu software .
Awesome 👍
Thank you 😊
Good morning 🌞
Good morning!
Nice video sir... 🙏 Need gps tracker using micropython program only using A9G module videos ❤💛
Will try to make it and upload soon.
but before that we should learn how to do several tasks using Micropython
Do we know what is the CPU and memory on this?
Hi! techisms please give me link for a9g at command firmware using google drive. Because the link of website is not working ,crc error in zip file. Thankyou I hope you will respond soon.
What version of Thonny are you using? It's not the 4.x.x because the latest one has a Ukranian flag in the toolbar and yours hasn't. The latest version has problems, probably because (according to the Thonny wiki): "Thonny 3.2 sent it via 'raw' mode, Thonny 3.3.0 and 3.3.1 via 'paste' mode and since 3.3.2 the default is 'raw_paste' if the device supports it [...] or 'raw' as fallback"
Cannot find the flash.lod files can you share them here ?
Nice work!. Is there any A9G version that support 4G?
No
is arduino C possible?
Is there any update on programming A9G using arduino IDE? this is for people who is more comfortable with arduino platform.
Not possible
can i use the thonny from my mac after flashing with windows
yes
Nice video thanks for sharing! A nice application would be a self contained gps tracker, as the A9G even has a SD slot built in.
Perhaps an idea for your next video?
where is the link for the firmware_debug_full.lod or firmware_debug_flash.lod are????????
hi,were you able to solve it?, i need that too
Can you tell dimensions
I bricked it Any hints on how to recover it?
Did you manage to recover it?
@@originalauthenticost7869
Yes, I have to find the original link, but I was able to flash it with original firmware and use it again
🤩
The Memes Are Getting More And More Toxic Day by Day In His Video 😂😂😂🤣😅 i Guess He Should Continue it.
😂😂
You are making good videos home auto mation gps tracker ext., want to make pan mala network jammer please help
I am your subscriber!!!
Help me😊
`CHST_Read32': Request to coolhost timed out ! (CoolHostTimeoutError)
I have the same error, Have you been able to solve the issue? If yes please how did you solve it
@@mechatronifynigeria7558 I haven't solve it yet.
@@mechatronifynigeria7558 Are you solved this issue?
or give me a coding
in the upcoming video, I'll share couple of scripts as well
@@techiesms Thank you sir but this is my college project so can you make a video using Arduino UNO With A9G Module 🥺🙏🙏🙏