Nice job, but it sounds more loud? Way loader! Was that the goal? Next time? Run two nuts on the exhaust bolts, and drive them together, that's the easiest way to remove the long bolts. Then you can new short bolts for the exhaust
Love the idea, but didn't quite work, seemed more noisey, how exhaust right in to your face and water in to the engine if it rained. I also remember doing something similar for my old motorbike using a coke can as a temporary fix, I also added glass wool (rockwool) which helped with the noise.
Exhaust bolt fatigue from vibration may become a problem. And it didn't seem much quieter in the video TBH. Could you angle the muffler down and put it through a close fitting hole in the deck?
A small, easy to make improvement. Calculate the area of the opening made by the exhaust valve. Make a plate with an opening 30% smaller. Weld it onto the existing tail pipe. Betcha less noise.
Ha seen this one coming from a mile away it’s actually louder the noise from small engines are not usually from the exhaust it’s engine noise through the crank case dang kids
Out of all the metal you could've made a sleeve or something to fit over the bolts for your muffler and tighten the nuts on that instead of using so many nuts. Just a suggestion.
Haaaa, that was really cool dude! I put a pod filter air intake on my mower. The exhaust was next. After that perhaps some led strip lighting underneath and I'll have the most pimping mower on the block!
I enjoyed your video, i absolutey LOVE over-engineered stuff. Your little silencer looks like it could take a direct nuclear hit and still keep on doing it's job.
My question is...... Why would you make a muffler that points directly backwards in your general direction? Being a landscaper for several years grass clippings tend to fly everywhere and this is just giving yourself an eyeball full of grass with this invention!
if you roll a tank over the lawnmower, the muffler will survive so f***ing heavy build, vibration can damage the aluminium cylinder head if it should be louder don´t use a muffler, if it should be quiet use a battery powered mower if you want to poisen yourself use a hose and put it on the exhaust and you mouth if you want to learn how to weld, ask some experts for help or make an education if there are any other reasons to build this "thing", I don't get it
RayZor that the point of the joke man. When he's cutting the grass while it's snowing, he can keep warm. But who the hell cut their grass when it's 20-30 degree.....lol
It looks great, but you would be better off pointing it straight up or to the side to keep it our of your face.You should have cut the exhaust bolts down so that you dont have to mount all those nuts.Not insulting it, i love and kinda wanna try it myself,but its constructive criticism.To make it better you should paint it too,that way it looks much cleaner
That's not how a muffler work man, you should've used two pipes. One coming in one side and the other opposite, stop them about an inch from the end of the can, where the pipe would almost be side by side inside. That would help cancel sound. All you did was make a gun silencer for your mower exhaust.
I’m curious... any input on whether mineral wool would be a better sound dampener? I know it’s one of the best sound dampeners in houses. Great vid! Need to make a new muffler for my Onan on my wheel horse. Now I have the confidence.
Everyone looks at when you mow the lawn and thinks... He's the kool dad in this neighborhood. This is the reason my wife makes me sleep in the other room now.
Ok ever body is talking about where its pointed and hoe it sounds the same but lets be real here why would you stack up all those nuts when you could just pull out the studs and run in 2 bolts
It’s louder, blows right in your face, and took half the day to do it,And yet I couldn’t stop watching. The shims on the studs is the best part
You can hardly hear it now! WHAT?? I SAID,, YOU CAN HARDLY HEAR IT NOW!! 😁
I think the fumes from aiming that directly into your breathing path is what is making you put mufflers on stupid shit lmao
What’s wrong with you are you mad you don’t got skills like him
This is like funny af
I love fresh exhaust in my face while I mow. Nice job!
RUclips has some of the best comedy on the net. Keep up the good work.
Why would you put the exaust end towards your face?
All fumes goes in your lungs
Did you do all that work just to make it louder?
All of that to make a muffler this is going to blow exhaust directly into your face. and it doesn't sound any more quiet. what's the purpose?
Ummmm...? Yeah.?. Like is it me,....or is it just as loud as the original? Then what's the point.
I miss the old 2 stroke lawnboy that dumped the exhaust under the cutting deck. Made it a lot quieter too.
That's NUTS😂 pointed it to your head, now you need ear muffs
And an oxygen musk
Nice job, but it sounds more loud? Way loader! Was that the goal? Next time? Run two nuts on the exhaust bolts, and drive them together, that's the easiest way to remove the long bolts. Then you can new short bolts for the exhaust
Why would you point the exhaust at the user?
It is very likely louder having the thing pointed towards your face. A baffle style muffler would have done a better job of muffling the noise.
how does that hot smelly exhaust feel in your face when you mow?
Now I'm no expert, but isn't the point of a muffler to... idk, MUFFLE the sound coming FROM the engine?
Now the mower is: louder, heavier, points right into your face… yikes. Looking for a quieter muffler…
I would have aimed it forward instead of right at my face.
Now it’s twice as fast😁 because you’re running to get done faster now that it’s blowing right at your face.
😂😂🤷
why did you point the exhaust right back in your face?
I was going to ask that. I guess he likes fumes.
You do realize a 90 degree elbow has far more restriction than a bend right? There is a reason why exhaust systems use bends not elbows.
Love the idea, but didn't quite work, seemed more noisey, how exhaust right in to your face and water in to the engine if it rained. I also remember doing something similar for my old motorbike using a coke can as a temporary fix, I also added glass wool (rockwool) which helped with the noise.
Mount some lights on your mower and nite mow,,, oh yeahhhhh👍🏻👍🏻👏🏻👏🏻👏🏻
hahahahaha yeahhh xd
i like it. nice job .nice work shop so how many vices do you have?
Aiming the exhaust towards your face does not seem like a good time mowing to me
So this must be the Manscape Lawnmower 3.0 everyone’s been talking about. Ok. You got me, I’ll get one lulz.
i was actually expecting it would be much quieter,lol.feel sorry for the nieghbour.
Haha good one man. I straight piped my mower. 👍
you have aimed the exhaust right at Your air intake
electrondady1 that’s called EGR bud
😂 Nice
He just made a cheap simpler version of a egr lol
The air intake is actually on the opposite side.
Exhaust bolt fatigue from vibration may become a problem. And it didn't seem much quieter in the video TBH. Could you angle the muffler down and put it through a close fitting hole in the deck?
A small, easy to make improvement. Calculate the area of the opening made by the exhaust valve. Make a plate with an opening 30% smaller. Weld it onto the existing tail pipe. Betcha less noise.
you lose power....
the way to get less noise is to make the airwaste energy before it gets out of the muffler
Why not stick it straight up n put flapper thing on top of stack???
Now this guy knows how to make an instructional video no talky talky but a lot of worky worky
Why did you position it to blow right toward your head...
You can make a lawnmower silent by turning it off.
Wow thank you so much for this advice it save my life and give me 10 wife’s
I don't care if it's a good idea or not. You created. You invented. You tried.
Ha seen this one coming from a mile away it’s actually louder the noise from small engines are not usually from the exhaust it’s engine noise through the crank case dang kids
Got all that exhaust fumes blowing right into your face now 😮
Why in the world would you want the exhaust pointing straight back at your face?
Why would someone make a muffler pointed up towards there face. All the nuts on the muffler? Guess you were board,nice job fabricating all the parts.
Out of all the metal you could've made a sleeve or something to fit over the bolts for your muffler and tighten the nuts on that instead of using so many nuts. Just a suggestion.
Haaaa, that was really cool dude! I put a pod filter air intake on my mower. The exhaust was next. After that perhaps some led strip lighting underneath and I'll have the most pimping mower on the block!
It is a baby pod filter by the way, only about 1-2 inch diameter. Looks awesome!
hahahahaha nicee
I enjoyed your video, i absolutey LOVE over-engineered stuff. Your little silencer looks like it could take a direct nuclear hit and still keep on doing it's job.
My question is...... Why would you make a muffler that points directly backwards in your general direction? Being a landscaper for several years grass clippings tend to fly everywhere and this is just giving yourself an eyeball full of grass with this invention!
At 8:15, why don't you cut the screws too? Or change it.
I'd rather not have the noise pointed right at my face, but that's just me.
It would be cool if you could make mowers quiet.
Reminded me of a day I helped my friend change his exhaust on his Honda Civic
if you roll a tank over the lawnmower, the muffler will survive
so f***ing heavy build, vibration can damage the aluminium cylinder head
if it should be louder don´t use a muffler,
if it should be quiet use a battery powered mower
if you want to poisen yourself use a hose and put it on the exhaust and you mouth
if you want to learn how to weld, ask some experts for help or make an education
if there are any other reasons to build this "thing", I don't get it
Nice idea but it sounds louder than the original muffler.
Bazooka Joe isn't that the point ?
And now you have fumes blowing directly in to your face😏
The spray paint to mark holes/outlines is pretty clever.
From lawn Mower to Honda Civic
How can I get the last 11 minutes of my life back?
Good thing I skipped to the end😂
A 90-degree Bend for an exhaust pipe. how's that working out?
John Sears about as good as them nylon nut spacers
Whats the problem with that? My rider has a stock one. Just tell me the issue.
vic steckhan if I have to explain that to you you do not need to be around any type of gasoline engine. Or diesel or 2 stroke.
Please do, I have been a very successful mechanic on all you listed for 20+ years. I am not being sarcastic, just want to hear your point.
vic steckhan if I have to explain to you what is wrong with that 90 degree Bend you are not a mechanic and never have been.
now that's that most painful 10 min of my life,
Points exhaust right at face lmao
Best sounding Honda ever.
Skipped right to the money shot, it sounds the same? Let’s rice the lawn mower mom.
Ok you got the fart cannon on now you need a cold air intake!
He must be a honda guy
If you made a much bigger muffler like how you made that one would it make engine quieter?
I wonder the same thing. I bet the longer it is the quieter it would be to a certain extent
Will this fit my 99 civic?
A grinder and paint make you the welder you ain’t
How to make a honda civic
Ahahahaha pure alla macchinetta pe taglia l erba!!! Che grande!
2kg exhaust? Why you pointed it in to your face?
that was a fun video. Well-paced and visible.
It's good for the winter time. The exhaust is pointed right to the face to keep warm. This is a low key life hack.
who the hell mows the grass during wintertime :D
RayZor that the point of the joke man. When he's cutting the grass while it's snowing, he can keep warm. But who the hell cut their grass when it's 20-30 degree.....lol
Maybe next time you can just hook up a hose and directly suck up the fumes.....
It's louder than the original
All smoke in your face🤣🤣🤣🤣🤣All noiz for neighbours😂😂😂
but it is easy to turn hahahahhahah
ADD VTEC AND DONE! 😎
Great video bro 👍👍😂 odlican video 😂👍#žp
tnx brooo
hahahha hvalaaa
So... will this fit a 1/2-28 threaded rod ;)
Engineering,design and build all are about a hundred years too late. You know there's nothing wrong with the original right?
Redirecting the carbon to go right up your nostrils. Well done.
Geez dude, get you wire fed mig instead of that stick welder, and why would you point the exhaust up at your face?
he's not trying to weld..he's learning how to make sanmiches!! those beads look like chunky peanut butter and jelly!!\
It looks great, but you would be better off pointing it straight up or to the side to keep it our of your face.You should have cut the exhaust bolts down so that you dont have to mount all those nuts.Not insulting it, i love and kinda wanna try it myself,but its constructive criticism.To make it better you should paint it too,that way it looks much cleaner
Now you can wake up your neighbors early in the morning.
Anyone that uses that many nuts to space something dont deserve a watch cut down the bolts but ima watch anyway
Just gotta have nothing but that carbo dioxide in you lungs the entire time 👍
Ouuuuuu yeahhhhh
That's not how a muffler work man, you should've used two pipes. One coming in one side and the other opposite, stop them about an inch from the end of the can, where the pipe would almost be side by side inside. That would help cancel sound. All you did was make a gun silencer for your mower exhaust.
chimp3376 yea I understand about resonance, but what I said will inherently have noise cancelation within the can.
was looking for this. looks good apart from the direction and the nuts to secure it perhaps cut the rod shorter and tap it
What welder you running
Im not quite sure why your would not have pulled out those long studes and and put in shorter bolts
I’m curious... any input on whether mineral wool would be a better sound dampener? I know it’s one of the best sound dampeners in houses. Great vid! Need to make a new muffler for my Onan on my wheel horse. Now I have the confidence.
Everyone looks at when you mow the lawn and thinks... He's the kool dad in this neighborhood. This is the reason my wife makes me sleep in the other room now.
the first 46 seconds are the best I laughed hard ..revving the engine .. ha ha bold!
FINNALY. He modded the Honda😂😂😂😂😂😂😂
hahahhahahah xd
Sounds better than a lot of Ricers
That isnt really a muffler it is a glass pack for a lawn mower. But nicely done it is way loud though.
Video starts at 9:10
Super cool, any guesses on the decibel change?
Terrible design, but your welding skills with that cheap stick welder aren't bad.
Cool video, very interesting! Love the way you pin all the negative comments 😂.
hahahhahah tnx :D
I had a loud gas powered generator, so I got an electric one - but somehow it doesn't work
It’s better not to weld on a magnet as it cause holes in side the weld
Technically a good work, but I wished to have reduced the noise of the lawn mower, not even increasing it.
Ok ever body is talking about where its pointed and hoe it sounds the same but lets be real here why would you stack up all those nuts when you could just pull out the studs and run in 2 bolts
Odličan video kolega.Pozz
Imt zakon mašina Hvalaaa careee😘😘
Imt zakon mašina sto čekaš?snimaj tafe-a hahaha
Toni4K ne stiže se brate mili,posla preko glave
12 seconds looking at an actual muffler would have produced a 10x better unit.