For those who are pressing the button 5 times but it doesn’t work: you probably bought the mjx14210 which doesn’t have this feature. The car in this video is H16BM However it doesn’t not need it because it’s already 100% and has the same top speed with this model in the video The Hope I wasn’t too late
@@Moneypit__RC yup I trimmed the hell out of it.. It almost looks like 1 of the rearwheels gets more power . I will take it apart nd double check everything
@@inconceivable_tn do it! Just start posting. I’m still new to this RUclips thing. Have fun with it! You can find many GPS devices on Amazon for cheap.
@@Moneypit__RC I might try to I have a few things I could post about RC wise. I have a Traxxas Emaxx, two MJX 1/16 truggies, the MJX 14301 drift truck thing and soon the h14bm.
interested to knw does the speed controller to 70% in the slower mode make it slower? I'm looking to get one of these for my kids and worried about it being too fast. Whats the difference between slow + 70% in terms of speed?
Yea it does make a difference. I’d say about 4-5mph. If you’re getting this for your kid I’d keep it on the slow mode of the ESC (1 beep) and 70% I’d say you’re around 19mph top speed.
Can you tell what text is print on your ESC? 16207 16208 14301 14309 14310 does not to the hack. On mine esc is standing 3 different types, like the Receiver the are two different one’s. the frist esc E45 The second E45A The third E45AZ ThanKs for checking (Standing above on off buton)
@@m41_doggy62 The 14210 already has all power unlocked, but the issue with this esc is that the throttle response is garbage as you probably know by now, if it was programmable I'd change the start punch to at least 70%. I'm going to upgrade the esc on mine as soon as i get paid at the end of the month. I've ordered a metal gear upgrade servo which hopefully is stronger then the stock one so it can hopefully keep the car straight... Might have to order another metal gear servo in that size after that just to use another servo saver horn that's stronger as well as it's just wobbling all over the place as you know, especially with the stock wheels, 1:10 onroad tires & wheels with 6mm offset it was kind of nice but ofc not exactly going to go through grass that well then. Gonna see if changing the springs helps it as well here on the shocks as it dives forward under power & turning quite a bit even with the tension turned up on the shocks. My Traxxas stampede with a half broken servo saver goes straight more often then this thing under power & I'm only running a 2s lipo on smaller wheels & tires.
Blows my mind how many issues can be resolved and options can be discovered by simply reading the manual. Never understood the " Manuals are for noobs" argument. SMH
After I changed radios I saw a loss in speed in my 16209 Mt this hack works for it to and I just tried it and bam 2 beeps back to being a monster so think you sir because my manual doesn't speak of this function
For those who are pressing the button 5 times but it doesn’t work: you probably bought the mjx14210 which doesn’t have this feature. The car in this video is H16BM However it doesn’t not need it because it’s already 100% and has the same top speed with this model in the video
The Hope I wasn’t too late
Yes, you are correct. I had a lot of questions asking that but this is a different model.
1 beep on ESC is slower mode, then use the 70% on control, better for learners/children. 3 beeps on ESC and 100% on controler... fun times ahead 😮❤😂
let's go!
Thank you! It’s a speed demon now!
Ive got a ftx tracer with the hyper go motor and the ftx trace esc and for some reason i had 45/50 mph out of it
Hello Sir. What charger do you use for this mjx 14210 batteries?
The stock charger it came with. I also have a good balance charger I use also.
@@Moneypit__RC thank you. Thought that I would need a new charger with included balancer
Mine doesnt go in a straight line nd also the 5times press doesnt do anything with mine 😢
Hmm. That’s strange. Is the steering trim set centered?
@@Moneypit__RC yup I trimmed the hell out of it..
It almost looks like 1 of the rearwheels gets more power .
I will take it apart nd double check everything
Same with mine. I have the H16BM and it doesn’t work with the 5 presses.
Same with brand did we get.lol I'm kinda pissed 😤
Mine too trimmed it out but doesn't keep straight it's crazy annoying
I have a H16e I don’t think it will work . Maybe this is only for h14 models. I will try when I get back home . And let yall know
My hyper go rc Screws are Loosening after ride how can fix the issue
Use some loc tite.
Supposed to get mine on Saturday can’t wait to try it with my 50c 3s Zeee battery and the unlocked mode.
Yes! Do this. It’s a beast.
@@Moneypit__RC I may have to figure out making my first RUclips video and posting my results I don’t have a gps thing or anything
@@inconceivable_tn do it! Just start posting. I’m still new to this RUclips thing. Have fun with it! You can find many GPS devices on Amazon for cheap.
@@Moneypit__RC I might try to I have a few things I could post about RC wise. I have a Traxxas Emaxx, two MJX 1/16 truggies, the MJX 14301 drift truck thing and soon the h14bm.
@@Moneypit__RC thanks for the push we will see if I actually do it
Where to buy 3s baterry for mjx 14210?
HyperGo sells them
When I hit my button 5 times it doesn't do it, anything I may be doing wrong
Strange. It should work
Have you notived any throttle delay on the car? Seems like some people have experienced it.
Nope. Haven’t had any issues with jt.
@@Moneypit__RC ok thanks! Are the wheels tight or very loose?
Mine go backwards too fast then forward how to fix ot
I’m not sure….
You need to mess around with the channels on your rc car and eventually you will fix it
I had the same problem
I think i have a different model and it doesent work😢
Oh boo!!
I just tried it on the hypergo 14301 and it didn’t work
I’m sure it only works on this model
Tried it doesn't work...no 3 beeps...what am I doing wrong
I’m not sure. Try again. Make sure you have this model.
Did you ever figure this out. I have a 14210 and a 14301 and neither is doing the 3 beeps
I have the 14210 and I don’t get the 3 beeps either
Is there any speed difference between between 14210 and 14Bm the older and the newer one plz reply
No difference. From what I’ve experienced
Can you unlock the extra speed on that as well@@Moneypit__RC
Hi, will this work on the hyper go 14302?
I’m not sure… I don’t have that model. you can try it and let me know!
Does it make any difference with a 2s battery?
No.
interested to knw does the speed controller to 70% in the slower mode make it slower? I'm looking to get one of these for my kids and worried about it being too fast. Whats the difference between slow + 70% in terms of speed?
Yea it does make a difference. I’d say about 4-5mph. If you’re getting this for your kid I’d keep it on the slow mode of the ESC (1 beep) and 70% I’d say you’re around 19mph top speed.
@@Moneypit__RC Thanks! although i just heard from a UK distributor that the reset button you have is only on US models for some reason ☹
Pure Evil Genius to hide the unlock full speed mode in the owners manual !. Who Knew to look there!,. Haha 😂
I know right?! Hahaha.
😭🤣😂😭🤣😂😭🤣🤣🤣😭
Can you tell what text is print on your ESC? 16207 16208 14301 14309 14310 does not to the hack.
On mine esc is standing 3 different types, like the Receiver the are two different one’s.
the frist esc E45
The second E45A
The third E45AZ
ThanKs for checking
(Standing above on off buton)
You have to use a 3s 2,000mah battery.
It will not work with a 2s battery
I have the mjx 16208, does this hack work on it also ??
I am not sure! But give it a try and let me know!
In which part of the manual did it mentioned the hidden super speed mode? Cool vid btw
I don’t know. I couldn’t find it. But someone said about it was in the manuals.
@@Moneypit__RC thanks! And sadly I just realized I bought the 14210 and not the H14BM HAHAHA, how unfortunate 🥹
@@m41_doggy62 The 14210 already has all power unlocked, but the issue with this esc is that the throttle response is garbage as you probably know by now, if it was programmable I'd change the start punch to at least 70%.
I'm going to upgrade the esc on mine as soon as i get paid at the end of the month.
I've ordered a metal gear upgrade servo which hopefully is stronger then the stock one so it can hopefully keep the car straight...
Might have to order another metal gear servo in that size after that just to use another servo saver horn that's stronger as well as it's just wobbling all over the place as you know, especially with the stock wheels, 1:10 onroad tires & wheels with 6mm offset it was kind of nice but ofc not exactly going to go through grass that well then.
Gonna see if changing the springs helps it as well here on the shocks as it dives forward under power & turning quite a bit even with the tension turned up on the shocks.
My Traxxas stampede with a half broken servo saver goes straight more often then this thing under power & I'm only running a 2s lipo on smaller wheels & tires.
@@Mini-z1994 thx for the info
Which car
HyperGo.
Doesn't work on my 16207 😔
Awh boo.
This for all models
No. I have the H16BM and it doesn't have that feature.
What gps do you use
Skyrc gnss.
omg thanks bro, i just got this car
Anytime!!
How do u cut the leds on?
Should be a button on the transmitter
Blows my mind how many issues can be resolved and options can be discovered by simply reading the manual. Never understood the " Manuals are for noobs" argument. SMH
Thank you. 👍
After I changed radios I saw a loss in speed in my 16209 Mt this hack works for it to and I just tried it and bam 2 beeps back to being a monster so think you sir because my manual doesn't speak of this function
Anytime!! I’m glad it worked for you.
Sometimes good to rtfm! 🤣
I agree!
It’s not a hack if it was designed and stated in the manual.
Anything can be a hack if you don’t know about it.
@Moneypit__RC Exactly! By the way, thanks for the speed hack!
This must work only on the 14 BM the 16 BM does not work
I only have this model. So I’m not sure about other vehicles
Will this work on hyper go h16h/h16e
I don’t think so. They are already set up for 3S