Yeah, same. Ironically I found this video right after I purchased mine. Didn't know you did pre buy inspections, just got mine in so cal, was right near your shop too lol. Fortunately I checked most of the things you showed here and it was all okay, no major rust issues anywhere, engine was new and most of the components underneath were new. Still has the original paint job. Though the wiring inside for the stuff they've done leaves a lot to be desired, will be redoing that. Thanks for this video, makes me feel a lot more confident in my purchase! Drove it to Texas, only issue I ran into was trying to start it when I stopped in Gallup NM, it dropped to 10 degrees over night.
I love your videos very informative and not afraid to point out problem areas. Your lnput about add on wiring is spot on!!! I've seen and repaired many of them(a friend had a 65 GT fast back Mustang , that had poorly dash done (very hacked) wire harness, did set itself on fire), but I had to replace. One thing I do, I have all of speciality tools(including ones for GM weatherpack plugs), and buy specialty plugs and shrink tubing bulk. Also I've seen the black tape on the gauge trick (lol, jerks). Keep up the great work on these fantasic vehicles!!! They are fun, but do need the proper attention!!
Damn that’s a helpful video. Could you release a price guide video? I’m shopping for an H1 right now and curious what you think good price points are for different years, conditions, duramax conversion, etc
Could you guys address the cylinder 8 issues on specific engine models? What to look for and typically cost for replacement or how to avoid it all together?
Okay... I know on the last vehicle I watched about the copperhead, thought it was the perfect vehicle with a few changes I suggested..... now, after watching this... the Copperhead in the Station wagon configuration is even better. Exoskeleton rails around the back for spare tire. All my gear would fit perfect in the back, also lockable. The back should be rhino lined with indoor/outdoor carpet over the top.
Awesome video, I live in SoCal and i have an H2. I am going to trade it in but I don't know if I want a newer H2 or an H1 yet. Can you do a pure inspection video like this one for an H2 ? Also, once I do decide what to get if I look at the car and see some issues I will definitely pay you to go out and look at it if I really want the car.
Back in 1994 or 1995 I was going to Tampa, and I stopped at a dealership that was in or near Tampa that was selling new Hummer's, and I looked at one just like this one, I thought the prices were around $65k. but they wanted just over $100k. I think it was $105.000. And I was like, Thank you, I hope you have a nice weekend, and I left! lol.
100%! Great engines. A bit under powered but still good. They have an inherent failure point that could pop up with the #7 and #8 cylinder cracking. That said it typically happens above 100k miles a day honestly it's a very low percentage. 👍
All this amounts to the garage making thousands of dollars on labor and only a couple hundred dollars worth of parts. Do it yourself and save thousands!
Lots of buyers for high end rigs/ any toys for that matter like this don’t have time or the will and tools/skill to repair these little things. They rather walk Into a place like this or sometime don’t even go in they just call and ship it back and forth, and say “fix it right now” and move on with what ever they do that makes them enough money to splurge on wants like this.
![Lil Uzi Vert - We Good [Official Audio]](http://i.ytimg.com/vi/DrSfBULAsek/mqdefault.jpg)
I wish I had seen this before I got my H1. Can't stress the value of this video enough.
Thanks Isaac! Much appreciated! Still missing a few key points but hopefully it helps people out. Thanks again!!!
Yeah, same. Ironically I found this video right after I purchased mine. Didn't know you did pre buy inspections, just got mine in so cal, was right near your shop too lol. Fortunately I checked most of the things you showed here and it was all okay, no major rust issues anywhere, engine was new and most of the components underneath were new. Still has the original paint job. Though the wiring inside for the stuff they've done leaves a lot to be desired, will be redoing that. Thanks for this video, makes me feel a lot more confident in my purchase! Drove it to Texas, only issue I ran into was trying to start it when I stopped in Gallup NM, it dropped to 10 degrees over night.
Dont forget door hinges for rust. And fuel and water pumps. Hoses belts. Pitman arm, bushings often need replacement etc. Thanks great video
Such great addvice truly wish you did this years ago. This will save you lots of money if you listen to these very wise words.
I love your videos very informative and not afraid to point out problem areas. Your lnput about add on wiring is spot on!!! I've seen and repaired many of them(a friend had a 65 GT fast back Mustang , that had poorly dash done (very hacked) wire harness, did set itself on fire), but I had to replace. One thing I do, I have all of speciality tools(including ones for GM weatherpack plugs), and buy specialty plugs and shrink tubing bulk. Also I've seen the black tape on the gauge trick (lol, jerks). Keep up the great work on these fantasic vehicles!!! They are fun, but do need the proper attention!!
Literally one of my favorite cars
Love the vids. Keep them coming. Been watching them for 3 years now. I love the blue h1 overlander
Thank you!
Great video. Tons of information. Thanks for all the great points to check !
Great video! Can you do one on the h3 adventure package?!
This had so much packed info!
Damn that’s a helpful video. Could you release a price guide video? I’m shopping for an H1 right now and curious what you think good price points are for different years, conditions, duramax conversion, etc
I love your videos. One of my favorite truck H1. Greetings from Finland
se on kyl kova
Aimar, kitos, my regards to Tapani Kansa.
Could you guys address the cylinder 8 issues on specific engine models? What to look for and typically cost for replacement or how to avoid it all together?
Check out about 2 or 3 Vlogs ago. I believe it was titled year to year changes. We went over some of the #8 cylinder issues. Thanks for watching!!!
Predator Inc will do! Thanks
Doing free inspection is so stand up. When I purchase a H1, I will have you inspect it first !!!
Let us know when you're ready and we will be happy to help. 👍🏻
Okay... I know on the last vehicle I watched about the copperhead, thought it was the perfect vehicle with a few changes I suggested..... now, after watching this... the Copperhead in the Station wagon configuration is even better. Exoskeleton rails around the back for spare tire. All my gear would fit perfect in the back, also lockable. The back should be rhino lined with indoor/outdoor carpet over the top.
Yes! Completely agree!!
Great video! Maybe you can do the same kinda video but about a military Humvee.
Sounds good! We will do one soon for you. Thanks for watching!
@@PredatorInc well thank you very much! Hope it gives you a ton of views.
Thank you for making this video.
Great information. Whats your opinion on the Planbsupply military Humvee?
Can't wait to see the interior build out 👍
Very interesting. Great job.
Thanks!!!
How much does it cost to get a Duramax conversation on a 2006 h2
Awesome video, I live in SoCal and i have an H2. I am going to trade it in but I don't know if I want a newer H2 or an H1 yet. Can you do a pure inspection video like this one for an H2 ? Also, once I do decide what to get if I look at the car and see some issues I will definitely pay you to go out and look at it if I really want the car.
Do yourself a favor Sean. Ditch the Blazer (H2) and buy a real Hummer!
surprisingly, many videos dont have details of the rear suspension, or the 'inner' brake. Just do a search...
Could do one of these videos on the H2?
Great information u guys give 👍👌
Back in 1994 or 1995 I was going to Tampa, and I stopped at a dealership that was in or near Tampa that was selling new Hummer's, and I looked at one just like this one, I thought the prices were around $65k. but they wanted just over $100k. I think it was $105.000. And I was like, Thank you, I hope you have a nice weekend, and I left! lol.
With out adding the Duramax what would it cost to fix all the issues with that H!?
Very good question……would like to know myself 👍
do you guys ship to other countries as well
Worldwide
Thanks very informative video. 👍🏼👍🏼
can you use the 6.5 to travel around? what are the chances it will breakdown
100%! Great engines. A bit under powered but still good. They have an inherent failure point that could pop up with the #7 and #8 cylinder cracking. That said it typically happens above 100k miles a day honestly it's a very low percentage. 👍
h1 is my dream vehicle. ill visit your shop if i ended up with up
Can you guys convert left hand drive to right hand drive?
Yes we can. Thanks for watching!
Sodering wires up north is bad . Salt corrode copper/aluminum
I’m looking buY H1 which year should I guy that would give me the least amount of problems ?
You should build that soft top you have listed for sale
Petrol version ,how do I get parts just in case I bought this Hummer
I wish engineers would had mad interior and hardtop like ford bronco 2024. Then it would be ultimate suv
Nice Breitling!
Does harbor freight make a good tester for getting codes ?
who are you? how the heck do you know so much about hummers? if I ever need to buy a hummer.. I'll be for sure getting you to do all
Haha!!! Just a guy spending too much time under the hood of a hummer I guess! Haha!!!
Which is the video that shows the different H1 model generations?
ruclips.net/video/Nni5FuE5oYs/видео.html
WOW VERY NICE H1 HUMMER
HOW TO PROCESS IF WE ARE GOING TO BUY THIS KIND OF UNIT
Shoot us a call, 760-734-1749 thanks!
Ryan looks like Tony Hawk.
Great video, informative.
Thanks!
Art what’s the going price of these hummers 1s. 2s
must have a 360 camera.
All this amounts to the garage making thousands of dollars on labor and only a couple hundred dollars worth of parts.
Do it yourself and save thousands!
Lots of buyers for high end rigs/ any toys for that matter like this don’t have time or the will and tools/skill to repair these little things.
They rather walk Into a place like this or sometime don’t even go in they just call and ship it back and forth, and say “fix it right now” and move on with what ever they do that makes them enough money to splurge on wants like this.
Wow very nice H1 hummer
Thank you!
I love hummer
Happy Thanksgiving..
Happy thanksgiving!!!
Does anyone know a company like this that does inspections on the Hummer H2
We do them on the h2 and h3 as well. Thanks!
Very informative
Thanks for watching!
Where's yr location in Central Florida??
Just north of tampa
How munch does these humerus cost. 1 s. 2s
Happy Thanksgiving 🦃🦃🦃
Same to you and your family!
I thought H1's body is made of Aluminum?
Predator 👍👍👍👍👍💪💪💪💪💪💪💪we love you.
My dreem SUV
what is ecm system
Engine Control Module or simply the computer that runs the engine. Thanks for watching!
How much to buy a h1?
مِنْ أَمْسِ أَوْ قَبْلَ أَمْس ! إذْن إلَيّ جَاءَ إلَى قِيَامِ السَّاعَةِ .".
I noticed he's not showing the rear seats ??????????????
Check out a few other vlogs. We have lots of interior footage. Thanks for watching!
Can someone guide me how can I import to Pakistan ?
Shoot us a call. Thanks
@@PredatorInc I don't have your number
a wide truck with a very limited seating capacity !!!
Exactly what makes it the best off road vehicle in the world. Entire drive train is tucked up out of the way. Thanks for watching
are you rich
beacauce you have many hummer,s
🇹🇲🇹🇲👍👍🇹🇲🇹🇲👍👍
Bad all talking no job done
Sorry, don't understand what your saying or asking. Please ask again. Thanks