Hi! First of all, thanks for the video! I'm looking after a schematic, with sourcable elements in the EU, which can act as a PoE end device (so it got 48V from the switch, and after that I can do with the 48V DC what I want, and also able to forward the network traffic with 1Gb/s without forwarding the 48V) which can be later used as a PSU for any, non PoE capable device, which stays below 17W (my Philips HUE bridge for example)... I don't know, that you have time/capacity/etc for this kind of project, but if you have would watch it, and maybe other home automation guys aswell (no, I'm not intrested in 100Mb/s dump injectors, the power must come from the PoE switch itself)
Thank you for sharing such fantastic project! 3.3 million engineers have chosen EasyEDA for 19.69 million designs so far. Let's make more extraordinary creations together!
This is fantastic tutorial. I use Kicad for years, but still enjoyed watching this. If I had only watched this video years ago, it would helped me so much. It basically has everything. Well prepared, scripted, executed, flawless. As usually with Rober's videos! This video, is going to be huge resource to so many people.
Sure, usually I order from JLCPCB boards + assembly. Now I want to make also enclosure for my projects. With box it looks like finish output from HW Engineer for SW development.
Great video! The one thing I noticed is when you do the 3D rendering of the board is that the parts may not be accurately portrayed. I’m designing a board using some DIP sockets because I need to use some chips that are discontinued. The DIP sockets are the same style yet they are rendered differently. The parts are Boomele IC-14P (LCSC C2325), Zhouri IC-8P (LCSC C305904), and Zhouri IC-16P (LCSC C5289487).
That is such a great tutorial and so statisfying to watch! Thank you for a perfect instruction. What a time to be alive: we literally can make a new packaged device without leaving the desk.
Thank you so very much for this tutorial. I was really struggling with parts placement and had no idea it was so easy to pick the part from the schematic for board placement. I intend to watch this more than once as there is so much cool detail. Aldo, i had no idea about the shell capability of EasyEDA. What a wonderful feature!!
fantastic work !! thanks a lot ♥ also - very cool that you always keep mentioning keyboard shortcuts and rename and beautify component names and orientations 🤘
Tips: With jlcpcb, if you are doing PCBA, they wil automatically move the order number to the assembly rails they add. So you don't need to pay extra to remove the order number, as it will be outside of your board :D
Thank you so much for this great tutorial video! I learned a lot!! I especially love the boxes! What 3D print technology and material was the black one that you really loved?
You ordered both the PCB and the 3D printed case from JLC, but ordered some connectors from Farnell. You could have used LCSC instead! If time is not a problem, I'd use the cheaper global direct line shipping method, which takes around 2 weeks or less to arrive to Europe and you get free shipping from LCSC when you have a PCB order from JLCPCB with that shipping method. By the way, that was a nice looking transparent case. Wish you had shown the enclosures a little closer to better see the quality!
@@RobertFeranec Yes, it is IOSS. I just choose Global Standard Direct Line for both the PCB and the Component orders. At LCSC checkout, they automatically detect you have an active PCB order available and they offer free shipping on the Global Direct Standard Line and the International Registered Mail shipping methods. As an additional note, I recently ordered from JLCPCB and LCSC, both orders are shipped and in transit now, and I'm still given the free shipping option from LCSC. Guess that means you can order multiple times from LCSC.
Thanks for the wonderful tutorial! You are a very good lecturer! I have the following question: I use Altium Designer and have many of my own libraries. Can they be used in EasyEda? Can they be converted?
1:30:38 Where I can get those filaments for a short price in Amazon? I did a research for it and there are just BIG quantity options, and I just want to buy for the LEDs of my PCBs. Regards!
I was able to buy one reel for around 25 USD in our local online shop. It should be possible to find it somewhere or possibly you can try a different manufacturer.
Please add your parts list to your description for the video. I found that you were using the online version and I was using the desktop version. So in some cases, links did not line up. Great video thank you for making it.
When you place small SMT resistors you have to have the amount of copper each pad (near the pad) roughly with the same area (thermal heat sinking ability) otherwise when you reflow you get tomb stoning where the resistor/capacitor stands up on one end. That is why the default is spoking!!!
I have not found the final answer on this topic. Often I use direct for SMT as often power pins are connected to polygons and I would like to keep the connection wide e.g. in this case USB-C power pins. I asked number of people about this and some say no problem, same say it may be problem .... but I never get complains from assembly house, so I don't really think much about it. I only use thermal relief on through hole pads connected to ground planes (especially to multiple ground planes) as these are soldered manually and if there would be for example 4 solid ground planes connected to a through hole GND pin it can be extremely hard to solder that pin. What's others people experience?
Thank you! But I'm getting this warning: "Component attributes does not match the Supplier Part, It is recommended to use Device Standardization." What should I do next?
Please can you ask your questions on our Discoro d channel? Possibly, I think someone already asked something similar. Here is the link: discord.gg/8a8dUcHmrx
How come you ordered the pcb with no colors, but you can receive both the pcbs with no colors and colors? I didn't saw you do anything to the gerber that the pcb has the colors?
Right now the color PCB ordering is not supported on the JLCPCB website outside of China (but they are planning to change this, so I included it in the video). I had to talk to JLCPCB directly to get the color PCBs.
Right now, I believe this what I used can only be done in EasyEDA and manufactured in JLCPCB China. But it is very new, I guess if people like it then JLCPB will probably try to push it more.
Check DRC give me this msg: "[Warn] : Component attributes does not match the Supplier Part, It is recommended to use Device Standardization". I follow the tutorial and place only part with a lot of JLCPCB Stock. I've not change any attribute. Why It says me that I'm not following "Device Standardization" ? (every item) ...
Compare: I give you 64 dollars and you spend them vs. You pay 64 dollars for getting confidence in your skills that can help you to get a good job or build things you dream about. This tutorial is not about price of the board it's about to give you an opportunity to say in future "This is not very expensive"
Color PCBs are now available at JLCPCB for everyone! Also, here is a link to the finished project: oshwlab.com/robertferanec/usb-c-power-supply
sure, Thank you soo much🙂
Hi! First of all, thanks for the video! I'm looking after a schematic, with sourcable elements in the EU, which can act as a PoE end device (so it got 48V from the switch, and after that I can do with the 48V DC what I want, and also able to forward the network traffic with 1Gb/s without forwarding the 48V) which can be later used as a PSU for any, non PoE capable device, which stays below 17W (my Philips HUE bridge for example)... I don't know, that you have time/capacity/etc for this kind of project, but if you have would watch it, and maybe other home automation guys aswell (no, I'm not intrested in 100Mb/s dump injectors, the power must come from the PoE switch itself)
Thank you for sharing such fantastic project! 3.3 million engineers have chosen EasyEDA for 19.69 million designs so far. Let's make more extraordinary creations together!
This is fantastic tutorial. I use Kicad for years, but still enjoyed watching this. If I had only watched this video years ago, it would helped me so much. It basically has everything. Well prepared, scripted, executed, flawless. As usually with Rober's videos!
This video, is going to be huge resource to so many people.
thank you very much
Thanks for the tutorial, I'm sure more people will know about our one-stop 3D printing service now!😀
Sure, usually I order from JLCPCB boards + assembly. Now I want to make also enclosure for my projects. With box it looks like finish output from HW Engineer for SW development.
I had a lot of fun working on this tutorial and I am very happy with the results.
Thank you! This was a very helpful introduction.
Thank you very much
Great video! The one thing I noticed is when you do the 3D rendering of the board is that the parts may not be accurately portrayed. I’m designing a board using some DIP sockets because I need to use some chips that are discontinued. The DIP sockets are the same style yet they are rendered differently. The parts are Boomele IC-14P (LCSC C2325), Zhouri IC-8P (LCSC C305904), and Zhouri IC-16P (LCSC C5289487).
That is such a great tutorial and so statisfying to watch! Thank you for a perfect instruction. What a time to be alive: we literally can make a new packaged device without leaving the desk.
That clear box is lovely.
The best-in-depth tutorial so far, I have been exactly the example you gave.
Fantastic tutorial from start to finish. Much appreciated!
Thank you so very much for this tutorial. I was really struggling with parts placement and had no idea it was so easy to pick the part from the schematic for board placement. I intend to watch this more than once as there is so much cool detail. Aldo, i had no idea about the shell capability of EasyEDA. What a wonderful feature!!
This is so cool!! I always thought PCB printing was expensive gor some reason. Thank you for the tutorial please make more with easyeda.
fantastic work !! thanks a lot ♥
also - very cool that you always keep mentioning keyboard shortcuts and rename and beautify component names and orientations 🤘
Thank you for amazing tutorial! Nice to see how these online manufacturing services are developing.
thank you！it is my first pcb
such a exquisite little thing
very good Robert. From almost 3 years i'm learning from you.
AWESOME Robert...AWESOME, love the way you teach this kind if things. You the BEST on this area. Shout out from Spain.
BLESSINGS 🌟💯!!!
Thank you very much for nice words.
This is the best video I've watched in 2024 ❤👍
Great video, I've completed this video today and that's really helpful for beginners. Thank you for your clear english 🆒
Good work sir...🙂
Nice and very clear tutorial and outcomes are so fascinating. Love very much
Thank You especially for mech part. Didn't know I can do it so easily with easyeda! Hope I can load some of my Altium projects to make this mech!
HI Sir ROBERT I would like to thank you for THE video The tutorial was Amazing Just as you
this is the love from INDIA
Awesome video, Robert Feranec you are amazing!
Nice overview of the 3d print ordering process, with all the needed details.❤️👍
Liking is a way of saying Thank You🙏
저는 한국사람입니다. 얼마전부터 관심있게 영상을 잘 보고 있습니다. 그동안 진도가 상당히 많이 나가고 있습니다. 모두가 @Robert Feranec 님 덕분입니다. 정말 감사합니다.
Enjoyed watching your video. Thank you 😊
Thank you for this video! It is time for me to switch to EasyEDA Pro.
amazing work, well done
Pozdrowienia z Polski. Dobra robota Robert!
Great video, Thank you for making it :)
شكرالكم 🎉🎉🎉
Good work. A very premium looking product.
Nice Job, Thanks!
Great Tutorial
How many layers did this particular PCB design have?
Tips: With jlcpcb, if you are doing PCBA, they wil automatically move the order number to the assembly rails they add. So you don't need to pay extra to remove the order number, as it will be outside of your board :D
I just one word that is WOW
Thank you so much for this great tutorial video! I learned a lot!! I especially love the boxes! What 3D print technology and material was the black one that you really loved?
imagine black
@@RobertFeranec thank you for your quick response 😃👍
What an awesome video I learned alot thank you
Good video, well done 👍 (now I just have to find a way to mount components on both sides. 😀
thank you. just change its layer from top to bottom
I could make pcb and transparent box with your tutorial. Thank you.
@RobertFeranec At 12:04 I cannot find the LED header in the device part of EasyEDA? What do I do?
The created mounting hole footprint does not appear in the "Personal" (or any other) library. What could be wrong?
You ordered both the PCB and the 3D printed case from JLC, but ordered some connectors from Farnell. You could have used LCSC instead!
If time is not a problem, I'd use the cheaper global direct line shipping method, which takes around 2 weeks or less to arrive to Europe and you get free shipping from LCSC when you have a PCB order from JLCPCB with that shipping method.
By the way, that was a nice looking transparent case. Wish you had shown the enclosures a little closer to better see the quality!
I didn't know they have free shipping. Is it the IOSS? I will try it next time!
@@RobertFeranec Yes, it is IOSS.
I just choose Global Standard Direct Line for both the PCB and the Component orders.
At LCSC checkout, they automatically detect you have an active PCB order available and they offer free shipping on the Global Direct Standard Line and the International Registered Mail shipping methods.
As an additional note, I recently ordered from JLCPCB and LCSC, both orders are shipped and in transit now, and I'm still given the free shipping option from LCSC. Guess that means you can order multiple times from LCSC.
Well Done
How many layers did this particular PCB design have?
Thanks for the wonderful tutorial! You are a very good lecturer!
I have the following question: I use Altium Designer and have many of my own libraries. Can they be used in EasyEda? Can they be converted?
Thank you very much for watching. I have never tried that, so I don't know what are the options.
@@RobertFeranec Thanks for the reply!
nice video
1:30:38 Where I can get those filaments for a short price in Amazon? I did a research for it and there are just BIG quantity options, and I just want to buy for the LEDs of my PCBs. Regards!
I was able to buy one reel for around 25 USD in our local online shop. It should be possible to find it somewhere or possibly you can try a different manufacturer.
Please add your parts list to your description for the video. I found that you were using the online version and I was using the desktop version. So in some cases, links did not line up. Great video thank you for making it.
How many layers did this particular PCB design have?
@@pranjaltrivedi1727 Basic 4 if I remember right
Hello, what picture resolution is recommended for the best result when adding a colorful image to the PCB?
according to their post: 1200 dpi ultra high resolution 6 Color UV Printer jlcpcb.com/blog/653-multi-color-silkscreen-pcb?from=mcss
Thanks for your help
Hi i want to make an esp32 board that can be powered by barrel jack connector...or possibly battery...any ideas for the schematic
When you place small SMT resistors you have to have the amount of copper each pad (near the pad) roughly with the same area (thermal heat sinking ability) otherwise when you reflow you get tomb stoning where the resistor/capacitor stands up on one end. That is why the default is spoking!!!
I have not found the final answer on this topic. Often I use direct for SMT as often power pins are connected to polygons and I would like to keep the connection wide e.g. in this case USB-C power pins. I asked number of people about this and some say no problem, same say it may be problem .... but I never get complains from assembly house, so I don't really think much about it. I only use thermal relief on through hole pads connected to ground planes (especially to multiple ground planes) as these are soldered manually and if there would be for example 4 solid ground planes connected to a through hole GND pin it can be extremely hard to solder that pin. What's others people experience?
Maybe some fuse/0Ohms resistor and a tvs/esd would protect the PC USB Host.
Hi Robert. I appreciate a lot your tutorials specially this one.Please Robert, how can i add text on the 3d enclosure? Thank you
What material did you use for your transparent 3d housing?. It looks cool.
8001 resin jlc3dp.com/3d-printing-quote
The same in KiCAD would be more interesting.
Where are you from?? Are you engineering??
Who the fuck wants to design on browser?
@@LeandroSehnemHeckif you use easyeda, than you as well
It's the same process, learn KiCAD
I am appreciate.
Awesome tutorial! Is the main purpose of this PCB to serve as a LED light, with 2 options to power it?
It's a simple +5V power supply generated from USB-C
@@RobertFeranec Thanks for the clarification!
Thank you! But I'm getting this warning: "Component attributes does not match the Supplier Part, It is recommended to use Device Standardization." What should I do next?
Please can you ask your questions on our Discoro
d channel? Possibly, I think someone already asked something similar. Here is the link: discord.gg/8a8dUcHmrx
Great, great, great tutorial.
One of the best.
Thank you a lot 👍👍👍
please make a video about pcb's with pictures
How come you ordered the pcb with no colors, but you can receive both the pcbs with no colors and colors? I didn't saw you do anything to the gerber that the pcb has the colors?
Right now the color PCB ordering is not supported on the JLCPCB website outside of China (but they are planning to change this, so I included it in the video). I had to talk to JLCPCB directly to get the color PCBs.
Is there a way to add colour to silkscreen in Altium?
Right now, I believe this what I used can only be done in EasyEDA and manufactured in JLCPCB China. But it is very new, I guess if people like it then JLCPB will probably try to push it more.
@@RobertFeranec So it is not some multi silk screen layer with each a colour of its own but a proprietary system
@@RemiBusseuil no, it's something special, I don't know exactly how they do it.
Check DRC give me this msg: "[Warn] : Component attributes does not match the Supplier Part, It is recommended to use Device Standardization". I follow the tutorial and place only part with a lot of JLCPCB Stock. I've not change any attribute. Why It says me that I'm not following "Device Standardization" ? (every item) ...
you can ignore these warnings, i also tried to fix them in my other project, only fixed some but could not figure out how to fix them all
31:30
noob question here why do you 1k ohm for an led
54.21
DESIGN ON BROWSER, LOL
EasyEDA has also an app
As helpful as this video is. I don’t think it’s exactly “quick and easy” at one and a half hours long
64 dollars
"This not very expensive"... Bro, give me 64 dollars just for nothing in this case
Compare: I give you 64 dollars and you spend them vs. You pay 64 dollars for getting confidence in your skills that can help you to get a good job or build things you dream about. This tutorial is not about price of the board it's about to give you an opportunity to say in future "This is not very expensive"
Regular prototypes only cost you $2 for 5 boards to manufacture and you can build you own boxes if you have a 3D printer.