Hi! I have this model but the thread keeps getting caught on something inside the machine when the needle is moving up and down and then snapping. Do you know what might be happening?
Slide the bobbin cover, you will see There a small metal latch on the top left of the assembly as you are facing the sewing machine which holding the case in place, if not, make sure rotate it to hold the case.
I have the 9005 model. Is there any way to adjust the needle position? I got the machine used and the needle is slightly off center. It sews O.K., I would just like the needle aligned properly.
If just slightly off center, I'll leave it be. It seems they are made like that. If not, you can remove the top cover, on the upper left, there is a thing which control the widths of the zig zag, by adjusting that it can also change the needle position.
Kiitos hyvästä videosta. Tässä videossa on selvästi kuva koneesta ja toimminnoista. Lisää tällaisia hyviä opetus videoista.👍 🌹
У меня 9020! Классная машинка!
Hi! I have this model but the thread keeps getting caught on something inside the machine when the needle is moving up and down and then snapping. Do you know what might be happening?
sewingmachinebuffs.com/thread-getting-caught-in-bobbin-area/
Cómo se arma donde se regula la tensión del hilo
I have this and the bobbin case keeps popping out as soon as the need goes down. Can you suggest a fix?
Slide the bobbin cover, you will see There a small metal latch on the top left of the assembly as you are facing the sewing machine which holding the case in place, if not, make sure rotate it to hold the case.
thank you
Do you perhaps have instructions for using the machine to paint for me because I am a difficult beginner
www.manualsdir.com/models/singer/9008.html
I have the 9005 model. Is there any way to adjust the needle position? I got the machine used and the needle is slightly off center. It sews O.K., I would just like the needle aligned properly.
If just slightly off center, I'll leave it be. It seems they are made like that. If not, you can remove the top cover, on the upper left, there is a thing which control the widths of the zig zag, by adjusting that it can also change the needle position.
Thank you.
My regulater dai settings is disturb how I repair