fantastic, my bolt got a little stuck the other day, i would never of stripped it down if it wasn't for this video, now the bolt is back like new, many thanks Dave,
great video,Not trying to knock it at all but here is a video of a full strip down of the rifle,including the bolt. CZ 452 .22 Rimfire Rifle Stripdown and Rebuild Tutorial
Nice video, i just got one of these... Um just wondering now that i know how 2 strip the bolt down and put it all back 2geather, what type of oils should u use and where would u oil the bolt after stripping it down?
In order to give the bolt a good cleaning, should you always disassemble it and clean all the parts individually? I've had mine since November of '08 and all I've used is a special toothbrush-like thing that I dip in solvent and then give the bolt a good scrubbing, no too hard though.
Can you tell me where to get a new set of Extractor Pins for the Bolt, mine seems to be chipped on one at the point and 2 out of 5 shots won't eject... thanks in advance..
When the bolt pushes a rimfire cartridge out of the magazine, where upon the base of the cartridge does the bolt touch, and push? How come we don't hear of rimfire slam-fire?
I have a cz 452 22lr ultra lux. The bolt handle is loose when in the down position for two to three inches with an empty chamber. CZ U.S.A. says this is normal. CZ Republic says contact CZ U.S.A. I have never seen a bolt gun with looseness in the bolt handle. If this is the way they are manufacturing the bolts, no one can give me an explanation, why a loose bolt handle. And what can it benefit. What do you think. THANK YOU
Nice video, i just got one of these... Um just wondering now that i know how 2 strip the bolt down and put it all back 2geather, what type of oils should u use and where would u oil the bolt after stripping it down?
I know that is not video related, but, lovely english accent you have, sir.
It's always a pleasure hearing that.
fantastic, my bolt got a little stuck the other day, i would never of stripped it down if it wasn't for this video, now the bolt is back like new, many thanks
Dave,
Thanks for sharing Gunvidder. I had my bolt cleaned after watching this and it had rust on various areas that I could have never known. Thanks
Cheers for making this video as my Bro-in-law came around and we stripped our rifles step by step using your Vid.
Thanks much! I've already memorized your method in case I need to strip it out in the field.
Great info and video. Great job.
Thank you for that.
Excellent. Just what I needed to change to a stiffer firing pin spring. Thanks!
Please just tell me where to find that type of spring
@@williamweels5555 Diversified Innovative Products company
Thank you so much
great video,Not trying to knock it at all but here is a video of a full strip down of the rifle,including the bolt. CZ 452 .22 Rimfire Rifle Stripdown and Rebuild Tutorial
Thanks 😊
Cheers old mate, after watching your viedo pulling down my bolt was easier than shitting in bead and kicking it out with ya foot !
@stuntmansyd I use Tri-Flo on my guns and my airplane. great stuff.
Nice video, i just got one of these... Um just wondering now that i know how 2 strip the bolt down and put it all back 2geather, what type of oils should u use and where would u oil the bolt after stripping it down?
Great video, any chance of a field strip/disassembly video for the CZ 452 .22?
nice vid,
can i suggest the same, but also recommended lube/grease points in your vid?
thanks
carl
Any chance you could do a video on trigger ajustment.
In order to give the bolt a good cleaning, should you always disassemble it and clean all the parts individually? I've had mine since November of '08 and all I've used is a special toothbrush-like thing that I dip in solvent and then give the bolt a good scrubbing, no too hard though.
Can you tell me where to get a new set of Extractor Pins for the Bolt, mine seems to be chipped on one at the point and 2 out of 5 shots won't eject...
thanks in advance..
When the bolt pushes a rimfire cartridge out of the magazine, where upon the base of the cartridge does the bolt touch, and push? How come we don't hear of rimfire slam-fire?
I have a cz 452 22lr ultra lux. The bolt handle is loose when in the down position for two to three inches with an empty chamber.
CZ U.S.A. says this is normal. CZ Republic says contact CZ U.S.A.
I have never seen a bolt gun with looseness in the bolt handle.
If this is the way they are manufacturing the bolts, no one can give me an explanation, why a loose bolt handle. And what can it benefit. What do you think.
THANK YOU
Where can i find that kind of spring for my bolt
555ต้องประกอบเข้าชุดถึงจะขึ้นลำเข้าเซฟได้
Nice video, i just got one of these... Um just wondering now that i know how 2 strip the bolt down and put it all back 2geather, what type of oils should u use and where would u oil the bolt after stripping it down?