@@jaywealthmechanics9285 Jay! Please what can I do to reduce the noise of my Sumec 3000 generator, I bought it used before, and the tuggle switch to power the home is not working.?
@@shamxykillz1297 replace the oil stick but you see the oil at the entrance of the oil compartment case. If it is gauge you will see it but if not you won’t see any oil at the entrance. Or you bend the generator small to check if is gauge
![Why Your Generator is Burning Oil [8 Reasons]](/img/1.gif)
Special salute for sharing
How did u loose the bolt without the flywheel rotating along
Use crew driver to hook the starting coil and flywheel then you loose it.
Hey thanks alot
@@onyinyeobinwa4022 you are welcome 🤗
Exactly what I'm experiencing
Check the oil seal
@@jaywealthmechanics9285 Jay! Please what can I do to reduce the noise of my Sumec 3000 generator, I bought it used before, and the tuggle switch to power the home is not working.?
Please show us winding diagram bro
Ok
Where to get a new oil seal for generator
What about if the oil leakage is from the piston?
Not possible
And what are the names of the tools you are using?
Go get a complete set of tool at the store. Range from size 6 to 22. Including plug spanner
You used a t spanner
@@shamxykillz1297yes 8, 10 and 12
What can I do to make my gen work
What is the fault.
My gen is not starting
Check out the oil gauge and the plug
@jaywealthmechanics29285 the problem is that the oil stick to check the level is broken
@@shamxykillz1297 replace the oil stick but you see the oil at the entrance of the oil compartment case. If it is gauge you will see it but if not you won’t see any oil at the entrance. Or you bend the generator small to check if is gauge
@@jaywealthmechanics9285 thank let me check
@@jaywealthmechanics9285 when i added more oil, it gave a little spark at the exhaust and released dark smoke