Это видео недоступно.
Сожалеем об этом.
Cattle Panel Trellis - what we like (and don't like) about ours
HTML-код
- Опубликовано: 17 июл 2020
- The things that we like (and a few things that we don't) about our DIY Cattle Panel Trellis, now that we are a few years in.
Visit www.wellgroundedgardens.com for more product descriptions.
email-us@wellgroundedgardens.com for more information.
![MURDER DRONES Series Finale [TRAILER]](http://i.ytimg.com/vi/p6mhC5Iatns/mqdefault.jpg)
The gal at Roots and Refuge attaches the panels a foot or two off the ground on raised beds, so there's plenty of room to walk under a wider walkway. She uses flat panels (also off the ground, so they are plenty tall) for tomatoes. In general not bringing the trellis to the ground seems to be a good idea - easier to prepare soil between plantings, plus a taller structure.
I love her set up!
Super clear and helpful video and just what husband and I needed to see. Off we go to buy our panels and thank you!
Hooray; I’m glad it was useful! Good luck-a few people have talked about how expensive they’ve been, lately 🤞
Some excellent tips regarding letting the suckers grow above the Determinate variety at an angle. I will consider this this Spring. Just subscribed, thank you
Glad it’s useful! I’d love to say that was an intentional idea, but it was very much a reaction to a flood last year-and now something I do on purpose :)
you got great ideas here and I love reading all the a lot of great ideas in there
Thanks! Super glad it’s helpful; I love the comments section on this one-lots of good “crowd sourced” tips! 👍
Very helpful. I have one 16’ piece in place and this inspires me to get another. I agree with the downfall of that space being inaccessible with a deeper garden. Such a great idea to put the pollinators there! Thanks!
I’m glad! And yes that’s the one part that irks me-in winter when I take down the panels the depth works really well and I can access from both sides, but in summers it’s awkward. The pollinator strip is a good solution for us
@@WellGroundedGardens Q NM
K
@@WellGroundedGardensWhy did you decide taking down panels a good idea?
Just love what you have done...I am gonna use this for many things, including a climbing Clematis and make it round...with the Cattle Panel and stakes...Thanks so much.
I wish I’d gone the round route-enjoy your project!
We used 5 cattle panels with a 30 inch wide (one rototiller width) bed outside each side. I'm a bit OCD so everything I do is a little overbuilt. Two 8 ft t-posts per panel, 4 clips per post, and I wired each panel together with 14 gauge galvanized wire. Super happy with it
Nice! If you’re going to get obsessive and overbuild, I’d say the garden is the right place to do it. 👍
Id love to see pics! That sounds like a great build!
Wow, BIG brain at work here - thank you for sharing !
Glad you enjoyed it!
I might have to try this, awesome channel btw. I’m watching all your stuff to get some new ideas!
Thanks! I’m always trying new experiments…if you try something I haven’t covered , please share. :)
Thank you for the practical advice!
Glad it’s helpful!
When I didn’t have my trailer available, I brought my bolt cutters with me.
I bought the 16’ and cut it half.
Somebody else said the same and I am deeply impressed and also depressed that I didn't think of it. I *hate* overpaying for things. Awesome idea!
Is that allowed?
I’ve done it a couple of times.
I do not think that the tractor supply near me stocks the 8 footers.
They were happy to cut mine into any lengths at the hardware store in frequent.
Your store has way better customer service-I’m jealous!
Ooo I didn't even think about access from the other side. This helps with my planning so much!
Glad it’s helpful!!!
Yes, thank you. Putting these up this weekend.
Awesome! Have a great growing season!
I would only change one thing for when I put up mine and that is to ensure a small 'walking' space (one or 2ft) around the *outside* of the trellis to ensure I could harvest from within and without.
Yeah, the 'dead zone' outside the trellis, that I can't reach easily from the other side of the bed, is the one downside. Works for pollinator plants, but if I had more space I'd consider straight trellises down the middle of the bed, instead of relying on arching it over the walkways.
Another idea... I got 16’ panels at Tractor Supply and used wire cutters to cut them to 8’ in the parking lot.
I only heard about that idea after we'd done this and MAN I wish we had been smart enough to think of it. They're still good value overall, but it irks me to overspend, ever. :)
They (TSC) cut mine in half for me as well... Courtesy cutting! 😊
Rita West nice! I didn’t think to ask em.
You can actually fit a 16 foot in a 5 foot truck bed. RUclips has instructions.
@@TheRainHarvester you can also watch some epic fail videos on you tube of people trying to get them out. Easy option for me was cutting them. And by doing that, mine have a different shape than the usual. The ones in my side garden look like a cathedral window shape and the ones in the back have a “flat top” where I bent two of the courses and zip tied them together.
This is very helpful.
Thank you
Glad it’s helpful!
Great tips - thank you. Yes, we just got 6 sixteen footers - yet to be put up - working on new garden beds first - then placement of them. Judi
I’m jealous! Still too cold here to do much in the garden. Share photos when they’re up!
Great video...very helpful!! Thank you.
Thanks! I’m glad it was helpful. Are you thinking of using one as a trellis?
I love it. I have one cattle panel. I grow cantaloupe and beans on it. I am getting another for tomatoes and cucumbers.
I had the same slow, addictive spiral :) I am kind of curious to see how many I eventually build...
Very nice set up thank you:)
Glad it's helpful!
Love that you got right to the point.
Glad it was helpful!
Yea it only took 4 minutes and 15 seconds in a six minute video
Very helpful!😃
Yay! I'm glad.
Very helpful! Thanks!
I’m glad!
Nice vid. Learned a lot of new tips. Also, you have healthy, pretty hair.
Glad it was helpful! The hair has definitely taken a downward turn during COVID, but thank you! 😊
Lovely garden
Thank you!
Love your use of pollinators. The only change I would make would be to widen the tunnel enough to accommodate the pollinators inside the tunnel and leave narrow walkway outside the tunnel for harvesting. The tunnel would be a little shorter which would make produce more reachable.
Shoot, made a similar suggestion before scrolling down to read this. But yeah. Anything short and not too terribly light-hungry would do on the inside there.
@@jeffengel2607 You also have to ensure the 'pollinators' are not nutrient hungry or 'invasive'. I believe 'Borax' is invasive.
Borage reseeds like crazy, so yes I have to pull the baby plants on a regular basis. But I've resigned myself to it. :D
Others are suggesting the same and I am going to give it a go this year.
@@WellGroundedGardensI had wild mustard appear at edge of border. Saved lots of pods but 2bh it wasn't necessary 😂 I like borage too. I think I will add it in. I've searched and searched for wild yarrow. I think seed packets come from cultivars. What do you say. I think wild anything is better.
It was helpful 👍🏻😊
I’m glad! :)
Thanks for this great video! Such practical uses you pointed out. Ive wanted to purchase these but no truck. Im sold to the point im finding a delivery driver! Thanks again
I carried mine on top of my car roof
There is a video by Calikim where she and her guy rolled them up and put them in their SUV.
We rented a big van for 2 hours to buy them and bring them home -- easy peasy :)
We put cardboard on the roof of our car and strapped them VERY securely with bungee chords, anchoring the front and back ends especially so as to avoid 'lift' while driving. We looked like idiots but it worked well.
@@WellGroundedGardens 🤣
Great video thank u
Thanks! Glad you liked it. :)
I love your garden! What direction do you orient your arches? Reading conflicting information on whether tunnel openings should orient E/W vs N/S. Any advice appreciated! Thank you!
We placed the arches with their long axis running east-west to maximize the “face area” that’s facing due south. It means they cast some shade to the north, but we use that to protect things like salad greens so they don’t bolt as quickly. 😁
great info
Thanks!
that tomato tip dropped almost on que to your last comment :).
omg I completely missed that :D
Buy the 16' panels and buy a pair of bolt cutters (few aisles over) and cut them in parking lot.
Also, they have store use bolt cutters you could ask to use.
I’ve since switched to nylon trellis material but if I ever go back to using large cattle panels, and don’t have a truck, again, then I’m definitely doing that
I used the whole 16' to create a beautiful full tunnel with plenty of walking space and plenty of room for things to climb. I think this year, I will be using my tunnel area that's already built for flowers and use the second one under my two trees so I can grow plenty of pots as my trees lost several large limbs due to storms so my shade garden is now a sun/shade garden.
The panels are very worth the money and very easy to put up. I'm 5'0" and I put mine up myself. The hardest part was putting in the posts. Happy gardening.
@lovelight9164 we moved to a new property, and I think I’m going to use the full 16’ long ones for our trellises, here 👍
How about installing trellises about 6 inches away from edge of the bed and plant tomato’s on inside of the tunnel. ,not outside, I also leave some space between panels when I install few of them in the row to get side reach also I would tight trellises a foot above the ground
Great idea!!! I think we've got enough height at the midpoint to still walk underneath even with a 'flatter' arch--I may give that a try this year! Thanks!
One suggestion I may have for the accessibility of your plants growing on panels is to move the panels 6 in. from the edge of the bed and plant on the outer side (closest to you when you're in the walkway). It's hard to see how you've set it up so sorry if that's not helpful.
For that matter: with a 4' deep bed, you could put the trellis base 18" in from the walkway side - second foot-row out from that edge - plant the trellissing plants there and something short inside from them. You'd have an easy enough reach on the other side of the bed and an easy enough one of the walkway side too.
That's a great idea; somebody else said the same and I think I may try it this year. There's enough height at the midpoint to 'flatten' this out a bit and still walk underneath.
I was thinking the same if I can still keep enough height to walk underneath (the arch is 3' wide now and would be 6' wide if each one went out 18"). If I can, it'd be a good shady spot to try and extend things like spinach and lettuce in the summer.
@@WellGroundedGardens No reason you can't keep it up near the walkway on one side and deeper on the other to fine-tune the top height and shape too.
I painted my cattle pannels and t post olive green they look so much better. I also used t post brackets instead of zip ties they will last years.
Nice! What type of paint did you use? Our T posts are currently a dark green color
@@WellGroundedGardens I actually used a olive green camouflaged spray paint . It looks so good in the garden the paint is a flat sheen so it blends well with the background.
Do you move these each year for crop rotation? That's my only complaint about my beautiful cattle panel arches - I have to rotate what I plant there because they're too hard to move.
I leave them in the same place at this garden-not because they’re hard to move (I take them down every fall for better access to my fall greens) but because with only the four beds, there’s no other logical place to put them. I make a point of putting in as many families as I can: spring peas before, beans and melons along with tomatoes, and fall peas after. But our new place has room for a much bigger garden and I’ll rotate them, there. Because we used zip ties to hold the panels to the supports, taking them down is as easy as snipping the ties. The hard part is setting the supports in place-at our next place I plan to build slots/sleeves into the beds so I can just drop in the panel supports.
A galvanized cattle panel (16 footer) is almost $80 canadian funds here at Buckerfield's stores .. in Canada. That is about $58 per panel ... in USA funds.
The price variance on these things is amazing. Even in this area there’s a wide range across retailers and regions, but the products appear identical. 🤷♀️
Thank you for this vid . I m still learning and have heard that tomatoes and cucumbers should be grown in a diff place every year ....how do you overcome the rotation ?
For this garden (small) rotation isn’t really possible on the trellis without giving up too much growing space. Instead I grow polycultures of multiple plant families to balance the nutrients we are taking from the soil and to avoid creating a “point load” for disease organisms. The trellises usually have sprint peas, then tomatoes, beans, cucumber, watermelon, and some years Malabar spinach on them. Followed by fall peas to add even more nitrogen back to the soil. If I ever have a serious disease outbreak I’ll have to not use them for a few years and plant fumigants in the soil, but so far, so good.
We garden this way (x30) and my biggest complaint is cleaning the dead plants off in the fall. If there is an easy way I'd love to hear. (especially when growing climbing beans)
Honestly, same. I have this obsessive habit of pruning the lower levels of things as they grow and that helps, some, at the end of the season. But cleaning off the panels is not at the top of my "fun gardening tasks" list, either. Maybe we could try lighting all of the debris on fire and burning the trellises clean. ;)
@@WellGroundedGardens Nah. Not good for the panels, will rust worse after burn. Let plants dry out, knock off with a broom. Pull up and discard roots. Or pressure wash if possible. Try small reusable carabiners to clip panels together. Keep the metal off the ground. Cheers !
It's called Fire.
I’m going to let you and Paul Moss debate that one ;)
I use cable ties to connect the cattle panels together. I use wires to connect the panels to the T post. My favorite veggies to trellis is pumpkins, butternut, acorn, spaghetti squash, green beans , cucumbers & zucchini.
I'm worried about it getting blazing hot in the Houston heat. I don't want it to fry my plants! Have you had any experience with that?
Not as bad as Houston but yes; it gets well into the 90s here in the summer and pollen goes sterile at those temperatures, plus tomatoes don’t produce lycopene to ripen. So we’ve got a few weeks where we have poor production. I keep things well watered and I’ll use trellises to cast some shade by planting stuff to the north side of them, but mostly I work on acceptance 😂
I’m curious if your orientation for the trellis. Is it east-west or north-south? I’m planning now and trying to figure that out. Thank you! Looks great
We built these with the long axis running east-west, to maximize the surface facing due south. It does mean that the north side gets a bit less sun, but I use these mostly in the summer when the sun is almost directly overhead, anyway. I put “needier” things like large heirloom tomatoes on the south side and cherry size tomatoes in the north side.
How difficult is it to remove the determinate plants? Do you remove the at the end of the season?
We let everything die off in our first frost (usually mid-October) and then cut the vines at the base, near the ground, and pull down the dead plant material from the panels and add it to our compost. I cut the zip ties to “release” the panels but we leave the T-posts where they are. Cattle panels go in the garage for the winter. I’d say the whole process takes maybe 45 minutes? It’s easy to get the plants off of the trellis once they’ve died back.
Do you have to worry about the height if the plants blocking the sun from the other plants? This is my only concern.
Where I live, you have to use partial shade in the summer when it gets too hot for tomatoes a peppers. So, partial shading is good here. It most definitely needs to be condidered.
I am the same as Joanie S--we do get some shade from the trellis immediately to the north of it (but honestly not much; the trellis is very 'airy' and allows light through, and we prune our tomatoes to single stems). But, it's a good thing for us--we plant lettuce and spinach in that area in the spring, and when summer comes around the shade from the summer crops on the trellis helps create a little microclimate where they don't bolt as quickly from the heat.
WOW, I like this trellis. Can you please tell me what the ideal sun orientation is for this? I imagine, that if the sun shines primarily on the long side of the trellis, then the other long side will be shaded by the plants in front of it? Is it better, if the trellis faces the sun with the walk in opening? Thank you
A lot of people orient them north-south so that they get even levels of sun; we ran ours east-west and intentionally created different microclimates around them…a “sunnier” side on the south and then a “shadier” side on the north where I could (as an example) plant salad greens to help give them cooler conditions and delay bolting. Depends on your goals…but that’s always the answer 🤷♀️
Thanks
Glad it was helpful! 👍
I like how you pronounce Borage - with our Kiwi accent it sounds more like porridge here lol. i'll use your version -sounds eloquent and fancy haha
I mean; it’s a fancy-looking plant so that’s appropriate 😂
What about alignment - how do you align it - east/west or north/south?
We have the long dimension running east-west to maximize the southern exposure. That does mean one side gets more sun than the other, but we use this for summer crops and in the summer the sun is high enough to give plenty of light to even the north side.
I was half-expecting you to say that the metal got too hot in the sun and sometimes scorched the tender shoots growing on the trellis. Not a problem?
Nope, that one hasn’t been a problem for us 👍
I really like the look and ease of the cattle panel, but I want to use it to maximize my space. I’m also concerned about the accessibility from both sides of my raised planters. I’m thinking of cutting it down into 2’ X 16’ wide sections for the trellis. 🤔
Worth a shot!
I am going to try winter squash on this trellis this year
Nice! I did spaghetti squash a couple of years ago and may try it again, this coming year. What are you growing? I've been curious if they could support heavier squashes.
@@WellGroundedGardens I'm gonna try acorn squishes and the butternut type
I would think about getting some wire before zip ties get to warm and come apart.
We cut and remove the zip ties at the end of season when we disassemble the trellis (to allow full access to the winter veggies in beds from both sides), so they work well for us. But if somebody wanted them to stay in place for years at a time, UV exposure and weakening could definitely become an issue.
I’m going to try a trellis like this. Can u show how u put up one???
Hi! We did a video on it: ruclips.net/video/LHCSJK_jezU/видео.html. Let me know if that works. :)
How is your trellis oriented? Like North south east west?
Hi! Its long dimension is east-west, so it presents as much surface area to the southern light as possible.
How wide is the pathway they're over? I've got a preexisting 2' wide path between beds and had assumed it wouldn't work with the full panel arched over. Yours appear to go straight up and bend to meet, and that seems much more possible! (If still tight)
They are over a three-foot pathway. We did sort of a Gothic arch shape at the top-I like the look of a full, curved, panel better, but this functions just fine. It does feel a little tight when they’re covered in plants, mid-summer.
@@WellGroundedGardens That makes sense, thank you. Maybe I'll end up trying it a foot into each bed at some point.
Definitely worth a shot-you could plant salad greens (or other shade-lovers) in that one foot stretch. 👍
Where did you buy the panels from ? 🙏🏼 thank you
Tractor Supply. :)
Great video, with important info. Work on getting the sound louder, though.:)
Yeah, I know! We shot this one about a year ago and since then I’ve invested in a proper microphone. Glad you liked the content. 👍
I have been thinking about doing this excet that I do not see the value in putting in 60 panels/ 15 panels per row. My plan is to just make 5 rows of fence and just trellis everything on it. This would make for a much cheaper option and should work just as well. What do you think? I mainly grow tomatoes, butternut squash, cucumbers and beans. Other than my other crops. I also use the high end weed woven weed barrier which does very well.
So you’re thinking of using the cattle panel as fencing (I am guessing oriented horizontally-about 4’ tall?) and growing up it? Or some other fencing material? If the panels, I think it’d work it’s just going to be shorter.
@@WellGroundedGardens Yeah the plan is to just make a few rows of fence with the cattle panels in their normal state. It will be shorter for sure. I have seen bit of other people who have done some short trellis like this and it works out good for them.
The other thing I forgot to mention if you keep having to replace your zip ties as they age you can always switch to stainless steel one. They run about 100 units for about 10 dollars. If you want to see which ones are the best then look at Project Farm's channel, I think the video is zipties or something along that line. He did a year long test to see how aged zip ties held up. Just a thought!
Thanks.
Good recommendation, thanks!
Where did you buy your cattle panels from
We got ours at Tractor Supply 👍
Can you set up the cattle panel to be less than 6ft? I live in a community where hoa will be on my neck if it goes above my fence. And I really want to use this in my backyard garden
Yes! They are 50" wide; if you turn them on their side and install them, that way, they'd be just over 4' tall. :)
@@WellGroundedGardens thanks
Great video. I may have a challenge with the full u shaped trellis since my space isn’t that big and it will create a challenge getting to the middle.
Thanks! For me I’d only do a curved design like this if it spanned a walkway or access aisle…you don’t want to create a “no man’s land” underneath
Exactly. I have a small space depth wise (2-3 ft) but it has decent width (10 ft).. The trellis would block me out from accessing soil to apply fertilizer, pull weeds, etc. So thinking maybe I just do 1 side of panel held by 2-3 T posts. I’m wondering if it will be stable if the panel is raised off the ground by 12 inches? Or could it fall over? I plan to hang winter melon which can grow 20-30 lbs each so kinda heavy. That said, I plan to dig the T posts into the ground by 12-16 inches so hoping that is ok.
Also considering if there’s a way to brace/support the T posts, but unsure right now.
@michaeljordan317 Jess at Roots and Refuge built her trellises that way-flat cattle panels attached to t-posts and raised about 18” above the soil. Here’s her video: ruclips.net/video/T5e4wf-QtUo/видео.htmlsi=Tkj9uqQYPl26qqEJ. Your approach is solid l, though winter squash might be too heavy of a load for it…maybe add some diagonal bracing at the base of the T-posts?
@@WellGroundedGardens Great! Thank you for sharing the video and for the suggestions. Next I’ll need to see what kind of braces could work with T posts.
… I plan to use my panels on the 4’ end caps bridging the walkway between beds to eliminate the hassle of reachability …
Awesome idea!
Can you use 4 foot t posts instead of 5 foot? I have lots of 4 foot ones.
With the caveat that I am not a structural engineer, I totally think that you could. Our 5’ ones are super sturdy but feel like a bit of overkill
@@WellGroundedGardens thank you
Yeah make a 2'wXLength of run on ea.side of panels and plant. Space a walk way then a 4'X 8' bed for non climbing
But where I can buy it? I visited home Depot, Lowe's and some other places and not found It
We got ours at Tractor Supply Co; you could try there if you have one nearby. The global supply chain issues might also be making these hard to get, right now. Ours was a couple of years ago. Good luck 🤞
Tractor supply, rural king, local farming coops
Tip for no trailer or truck for hauling. Take your boltcutter or hacksaw and cut it into the lengths you can haul, right out in the parking lot.
A few others mentioned this and I *really* wish we’d thought of it at the time 🤦♀️
Tomato is high in acid. I wonder if any zinc leaches into the fruit when it is touching it. galvanized steel does not meet USDA food-safe serving standards for acidic foods; like tomatoes, pickles, fish and fruit juices.
Interesting question-i imagine the acid in the interior of a tomato, if you, say, cut it in half and rubbed it on the trellis, could cause zinc to leach in...but the exterior of the fruits aren’t generally acidic. The portions of the plant that touch the trellis are primarily the vine stems and leaves, so it hasn’t been a concern for us. Definitely something to keep in mind for canning jars and food storage containers, though!
WOW in Canada they are 100 dollars plus delivery. We don’t have 8 foot ones.
😳 Which part of Canada?
Where can I buy the trellis I am in the north New Jersey thanks
I'm in south jersey and I've located them at Tractor Supply Company for the best price. Other farming supply stores can order them in for you at request usually too. You'll need to buy cattle panels and bend them into an arch and secure them on t posts
Thanks for responding .Happy Healthy NEW YEAR 2021
I'm over in PA. If you make sure your top has a pitch, you can also cover this with plastic and have it shed snow so you can use it as a greenhouse during winter. Good luck with your garden in 2021!
@@FairieChele ooh that’s a good suggestion and good reason to move the bases of the t posts out from the edge of the bed and towards the center
@@FairieChele hi! Is that what they call "floating cover" or is that something else? Cheers!
I bring bolt cutters and cut the 16 footer in half .
Several people mentioned that, and I wish I’d thought of it. Badly.
Great panel but it's $70 for that size in my neck of the woods ☹️(Sault Ste. Marie, Ontario, Canada)
Whoa!!! That is a serious price difference. There may be other less expensive options that would still work. What kinds of plants are you trying to trellis?
I grow masses of pole beans and cukes. This year squashes will be trained on them as well. I did purchase the panels on sale($50 each... What a steal!🤪) but I still can't get over the price difference!
We’ve used electrical conduit in the past (like this tutorial: ruclips.net/video/TIrEaq49iXQ/видео.html). For me, a ten foot length of the conduit is $3.70. They’re sturdy and only a little more work to put together. 🤷♀️👍
Keep an eye on kijiji. I found hog panels on there for 55 for 16ft.
ok so just put cattle panel trellises on narrower beds (or use pollinators), not really a big deal. I have a spot in my side yard that gets decent sun in May-July but then the shadows from the fence and house start to extend deeper into the area in Aug-Oct, but only at ground level. At a height of 5-8ft, there's still good sun, so I'm thinking of putting a cattle panel forest there.
Yeah, exactly-ours is only an “issue” because we use 4’ beds and access them from both sides during the winter (when the trellises are down). Your idea sounds like it should work 👍
@@WellGroundedGardens Have prices gone up a lot in your area since you made this video? Was $22 the standard retail price in your area or did you get a really good deal? The ones I could find were $75 so I'm wondering if those are overpriced or the new normal... Hard to say how much the price for all these things will improve too, how much is due to the current high rate of inflation, how much is due to supply issues, etc.
2024 the panels are $48.00 each for a 16 foot by 50 inch panel 4 gauge wire
I used 8’ panels for this; they’re currently selling for $25 at Tractor Supply in my area (about the same as when I made this) and the 16’ ones are going for $45.
@@WellGroundedGardens thanks I'll check Tractor Supply. They ONCE had them locally at Home Depot and Lowes.... No longer. They WILL deliver from Lowes. HD says simply not avail in Dallas.
I attach my panels up about 18” - 2 ‘ up on the t posts.
I've seen others do that, too!
Why is that?
Jess at Roots and Refuge does that to get more overall growing height
Anybody reading this....buy the 16' and fold it in the middle to 8'....unfold when you get it home....or even just cut it where you buy it easily with cheap bolt cutters into half.
Several people flagged this-wish we’d thought of it!
Priced them today in Fairbanks, AK. $130.
Yikes!
those 8 footers are like $80 in australia
Whoa!
When you purchased the 8' cattle panels for $17 each, why didn't you just take a pair of bolt cutters to place where you bought them and cut the $20 16' panels and save $14 per trellis?
Many others flagged this and MAN I wish I'd thought to bring cutters. I hadn't thought through the issue of transport until it was too late.
Instead of buying single panels, you can buy a large roll which will fit in the back of an SUV or van
At the time we only had small cars-but good tip!
@@WellGroundedGardens ah. In that case arrange with Home Depot or Tractor supply for delivery.
This was several years ago but if I could go back, I probably would do that or take the other suggestion on here and buy a large panel, then cut it in half with bolt cutters
But I thought the “suckers” don’t produce fruit (.?)
If you root them they will grow into a completely new plant-but I’d recommend doing that at the start of the season so they have time to grow to full size and produce. Or do what we did and train them off to the side as a second main stem. This is for the true suckers (the ones that grow at a diagonal from the intersection of the main stem and a leaf)-not the side leaves :)
Nothing for nothing, I agree with all you say but learned the levels of cadmium and zinc are elevated around this type of fencing. After of course I spent over 300$ on 16ft panels.
Interesting. Ours aren’t in contact with the ground, but I suppose rainwater does wash down them…
Didn’t know tomatoes had suckers I’ve ignored them I guess
You can gently break them off, put in water for a couple days and plant. You’ve cloned the original plant. Did it with three of my favorites this past summer
I mean, it's not the end of the world if you ignore them. :) It does help ours avoid diseases if I keep them pruned, and as Bradford Homestead said, they make free plants for you. I did a whole video last summer on rooting suckers--they make really nice, healthy plants. Works for basil, too!
Sometime told me they get hot and hurt the plants
The plants that we grow on it shade the trellis with their leaves and it never gets that hot…it could maybe be an issue with very fast-growing crops as they climb up into the recently unshaded areas? Or maybe if you grew something “low density” that didn’t offer much shade it could happen… but so far we’ve never had that issue.
$22 ! ! ! !? I pay $150 regular or $99 on sale per panel in Canada
Good lord! They increased in price, here, during the post-pandemic inflationary period but nothing close to that! We’re at $42 USD for the 16’-long panels.
Nothing you said as to with the trellis it's self, and everything to do with how chose to use it. So I guess it's good to know what not to do.
User error is real-we adjust every year.
???? buy a 16' and use a cable cutter on site to cut them in half and save $12 dah! using a mallet not a good idea, use a pole driver, safer on your fingers
Other people suggested the same cable cutter idea. Wish we’d thought of it ahead of time! We don’t own a pole driver as we otherwise don’t have a use for one.
Wow so cheap❤❤❤
Definitely good value for the money!
16 footers are no longer $20. They're like $35 now. 😐😐😔
I believe it. Construction materials of all kinds went through the roof.
@Well Grounded Gardens yeah. :/
We were building a house during the worst of that, and DEFINITELY felt it. :(
I got robbed tractor supply charged me $28 dollars 💸 for a 4x16 foot wire panel they are over charging all of their customers I call it stealing and believe me they want see me again for a very long time 😡
Ugh, sorry. The pricing is definitely inconsistent from area to area.
Well, the price rocketed up a lot and now at $25.99/sheet.
STOP with the UPspeak!!!!
My top priority at the moment is saying the word “so” less frequently. I’ll add that one to the list. 😉
$22... Those are now $37 and during covid in 2021 they were over $50. Bidenomics at work. Let's Go Brandon!
They’re still currently $22 in my area, same as when I made the video. I think it varies by region. Also, can we not make EVERYTHING about politics…? This is a gardening channel
2023 pricing at tractor supply
- 16 foot long = $33
- 8 foot long = $22