Ty. Performed @ 2012 Lexus IS250. It works like a charm. Technically useful. No harm to car. It fixed the misaligned steering wheel. Enjoying to drive it again. U r a Genius !!! :)
@@kexsz25 I set the front wheels/tires straight using the steering wheel before pressing the "start stop button to the ACC position." Once this procedure is performed, the steering wheel is automatically aligned, reflecting the straight position of the tires. Ty.
Hi, i've replaced all of the wheel bearings and abs sensors on my is 250 and my vsc is turning on when im turning while reversing. Is it going to help in my case?
Thanks for the video. Does this work on a 2018 rav4? My steering wheel is tilted to the right after an accident. If I align the wheels and correct steering positon, I get "lane departure alert malfunction" and "pre-collision system malfunction " messages and skidding light. Thanks
Do you not have to reset the current zero point calibration first by opening and closing the same circuit at least 4 times in 8 seconds before performing the calibration?
If your vehicle has over 100k miles the power steering module computer is known to corrode and/or go bad over time. It’s easy fix if it’s just slightly corroded. It’s right under the battery under the battery cover. Buy some electrical parts cleaner and a tooth brush and clean well. Mine was so bad I was loosing power steering. Yours just needs cleaning. Theres many videos on RUclips one by an Asian guy with a is250 that has an excellent video on it.
I’m gonna try this cuz I have no codes no abs light on but only the power steering light is on no check engine so trying to figure this out before spending all this money to replace rack
@@isfworld same after i disconect the battery to clean the trottle body i connect the battery again and my car stuck on park and the ps doest work all fuse are fine and i buy a new battery and im still have the same problem also i have all lights come on
What have you done to the vehicle recently? Hit a hard pot hole? Alignment? Lowered? New rims? All of these can mess with the sensor which measures steering angle
Ty. Performed @ 2012 Lexus IS250. It works like a charm. Technically useful. No harm to car. It fixed the misaligned steering wheel. Enjoying to drive it again. U r a Genius !!! :)
Did you align the wheels or the steering wheel before starting it?
Because if it was misaligned 1 of the 2 was not straight
@@kexsz25 I set the front wheels/tires straight using the steering wheel before pressing the "start stop button to the ACC position." Once this procedure is performed, the steering wheel is automatically aligned, reflecting the straight position of the tires. Ty.
Thank you very much! I did this on a 2011 ES 350 and it works perfectly
Worked for my ISF. 👍🏼👍🏼👍🏼
this worked for me, it got rid of the C1336 code and C1201. i have a 2009 IS250. thanks for the video Daniel!
Nice IS250..... Kudos for having a manual transmission. Mine is a manual as well.
Save me a lot of money and time, thanks again
it worked in my Lexus IS-F!!!! thank you!!👍👍👍👍👍
Hi, i've replaced all of the wheel bearings and abs sensors on my is 250 and my vsc is turning on when im turning while reversing. Is it going to help in my case?
WORKS LIKE A CHARM ! GREAT VIDEO 👍
My P/S blinking but my ABS light was not blinking. i am having ABS light on since i changed the steering clock spring. Any Advice? Thank you 🎉
Hi please how can I off my AFS on my manual transmission uk is250 2006 ?
Best car Ever..... Lexus 💪
Can this possibly help with steering stiffness?
does it do you know now?
Thanks for the video. Does this work on a 2018 rav4? My steering wheel is tilted to the right after an accident. If I align the wheels and correct steering positon, I get "lane departure alert malfunction" and "pre-collision system malfunction " messages and skidding light. Thanks
Do you not have to reset the current zero point calibration first by opening and closing the same circuit at least 4 times in 8 seconds before performing the calibration?
No you don't have to do. With this method you overwrite the old zero point.
What was the car doing before the calibration
@@eloypadilla8851 Would be curious to know as well. Mine 09 is250 steering is little bit stiff and sticky. I wonder if this would fix the issue.
@@daniellengyel7966yeah what was the problem before the calibration?
@@TheJurciksdid you ever find a solution my steering wheel feels the same
Does the TCR button work after doing that?
I have power steering light flashs very fast, no fault codes. Everything is normal but the light only come. What could be the issue?
Mine comes on and turns off sometimes stays on but of car restart goes back to working, no fault codes either
If your vehicle has over 100k miles the power steering module computer is known to corrode and/or go bad over time. It’s easy fix if it’s just slightly corroded. It’s right under the battery under the battery cover. Buy some electrical parts cleaner and a tooth brush and clean well. Mine was so bad I was loosing power steering. Yours just needs cleaning. Theres many videos on RUclips one by an Asian guy with a is250 that has an excellent video on it.
Can I do the same with GS 350 2010 model?
Would the work for a 2015 is250?
Are all USE20 (2nd gen IS) OBD2 pinouts the same? I have an ISF and I need to do this
Yes
this a FIRST that i got corrected and fixed on my lexus, First
I’m gonna try this cuz I have no codes no abs light on but only the power steering light is on no check engine so trying to figure this out before spending all this money to replace rack
Did it work??? I have power steering issue as well.
@@isfworld same after i disconect the battery to clean the trottle body i connect the battery again and my car stuck on park and the ps doest work all fuse are fine and i buy a new battery and im still have the same problem also i have all lights come on
let me
know if you fixed
what if my P/S not flashing?
Hello Daniel do this work for stiff steering wheel with p/s light on!?
Did you ever figure it out I’m dealing with the same on my 08
same@@CarJunkiez0825
what did you end up doing? @@CarJunkiez0825
@@CarJunkiez0825there’s a harness under the car right in the middle of rack you’re supposed to tighten it with a zip tie same for the airbag light
could you elaborate or share a link to this?@@erickvillanueva6506
hi, any idea how to change the MPG to L/100km?
part it
Does this help centering the steering wheel?
Didn’t work for me not sure it didn’t even say testing but it was flashing
now i only got that Nagging airbag symbol sitting on the right upper corner just orange me everytime i get in my car
What wheels are those?
Hyundai Genesis wheels
Did not work on IS250. Auto. Still have torque sensor 2 on obd scan
I have 1 and 2... did you fix it by any chance?
What have you done to the vehicle recently? Hit a hard pot hole? Alignment? Lowered? New rims? All of these can mess with the sensor which measures steering angle
@@Embrxceyourdemonsalignment. Fixed when recalibrating them with odb reader/system
@@MegaG15 haha same issue with me. Did my alignment at Toyota and I guess they forgot. I did the manual paper clip jump method to fix mine.
awesome trick!!
What year is yours?
2006
now to find a paper clip
damn didn’t work
Steering still stiff
did you figure it out?
have the same issue now and i took it to the mechanic and they supposedly changed the steering rack
I have a 2014 IS 250 dash board says EPS harder to steer would this help
@eloypadilla8851
Hey did you figure out your problem I’m have the same issue?