I spent about 5 hours Saturday going through your video! It was so helpful installing my trolling motor and battery. Thank you so much for these resources. Keep them coming installing fish finders and anchors. I would love to keep improving my kayak!
Random question here but can you move the steering on the PWR 129 to a hand system like what’s on the Native Titan X? Reason being is that i fly fish and want to see if I can get the peddles (as awesome as they are) out of the way. Thank you so much again for all the videos and info. So helpful.
Unfortunately, we are not aware of any products on the market that allow you to move the steering from foot controlled to a hand controlled. One option you could consider is a bow mounted Xi3 GPS trolling motor: bonafidefishing.com/products/pwr129-bow-motorization-kit-with-saltwater-motorguide-xi3-gps-and-dakota-12v-100ah-battery
@@bonafidefish oh yeah. I have an Xi3 as well :) i just really wanted to steer the troqeedo when sitting (when traveling up stream or across the lake) but then not have the foot peddles in the way of the fly line. Not a big deal of course. Thank you again! You are so helpful
This is not something that we have tested so we cannot guarantee will work. That said, ff it is the 45inch 12v 55LB motor it seems like it could possibility work, but may require the specific Minn Kota Plug and Receptacle. The kit includes the Plug and Receptacle for the MotorGuide Xi3. Here is a list of what is included in the PWR Bow Motorization Kit (without Battery or Motor) below. -Breaker, Waterproof Manual Reset 60Amp -Screws and Nuts for Installations -Rod Sock to cover wiring -Wiring: 8 Gauge Black Red Zipper Wire -Dakota Lithium Connect-Ease 12 Volt Trolling Motor Connection Kit -Heat Shrink Sleeves 1/2" -Connector, 8 Gauge Butt Connector -Lugs, 8-gauge Copper Lug -Rope for Lift/Lower Lines -Bungee -Lift/Lower Knobs -Pull Handle for Lift/Lower Lines -Deck Line Guides -Spectra Cable -Carabiner -Knob Rest -MotorGuide Xi3 Quick Release Bracket -MotorGuide Trolling Motor Receptacle -MotorGuide Trolling Motor Plug -YakAttack GT Cleat XL -YakAttack Through Hull Wiring Kit(s) -PWR Bow Motor Mount Sorry we do not have a firm answer but hope this helps!
You do not have to mount the breaker on the hatch but we do not recommend laying it in the bottom of the boat. An alternative is to use our new "Computer Plate" which mounts inside the bow of the PWR for attaching electronics. It is in stock and can be found here: bonafidefishing.com/products/pwr129-computer-plate
@@thomasallar169 It is super simple - we basically send the plate with double sided taped foam strips and it slides right up into the bow of the kayak. The tape adheres to the kayak and to the plate.
I spent about 5 hours Saturday going through your video! It was so helpful installing my trolling motor and battery. Thank you so much for these resources. Keep them coming installing fish finders and anchors. I would love to keep improving my kayak!
You're welcome! Glad it was helpful!
LOL My GSH dog is like yours to. Loves the attention. Great video
Thank you, very nice presentation 👍🙏👍
Random question here but can you move the steering on the PWR 129 to a hand system like what’s on the Native Titan X? Reason being is that i fly fish and want to see if I can get the peddles (as awesome as they are) out of the way. Thank you so much again for all the videos and info. So helpful.
Unfortunately, we are not aware of any products on the market that allow you to move the steering from foot controlled to a hand controlled. One option you could consider is a bow mounted Xi3 GPS trolling motor: bonafidefishing.com/products/pwr129-bow-motorization-kit-with-saltwater-motorguide-xi3-gps-and-dakota-12v-100ah-battery
@@bonafidefish oh yeah. I have an Xi3 as well :) i just really wanted to steer the troqeedo when sitting (when traveling up stream or across the lake) but then not have the foot peddles in the way of the fly line. Not a big deal of course. Thank you again! You are so helpful
I would like to get the motorization kit without the motor. Will it work with a Minn Kota Terrova motor instead?
This is not something that we have tested so we cannot guarantee will work. That said, ff it is the 45inch 12v 55LB motor it seems like it could possibility work, but may require the specific Minn Kota Plug and Receptacle. The kit includes the Plug and Receptacle for the MotorGuide Xi3. Here is a list of what is included in the PWR Bow Motorization Kit (without Battery or Motor) below.
-Breaker, Waterproof Manual Reset 60Amp
-Screws and Nuts for Installations
-Rod Sock to cover wiring
-Wiring: 8 Gauge Black Red Zipper Wire
-Dakota Lithium Connect-Ease 12 Volt Trolling Motor Connection Kit
-Heat Shrink Sleeves 1/2"
-Connector, 8 Gauge Butt Connector
-Lugs, 8-gauge Copper Lug
-Rope for Lift/Lower Lines
-Bungee
-Lift/Lower Knobs
-Pull Handle for Lift/Lower Lines
-Deck Line Guides
-Spectra Cable
-Carabiner
-Knob Rest
-MotorGuide Xi3 Quick Release Bracket
-MotorGuide Trolling Motor Receptacle
-MotorGuide Trolling Motor Plug
-YakAttack GT Cleat XL
-YakAttack Through Hull Wiring Kit(s)
-PWR Bow Motor Mount
Sorry we do not have a firm answer but hope this helps!
Can I buy just the parts for the lift/lower install? I don’t see it on the website anywhere. I have everything else.
You should just need this kit here: bonafidefishing.com/products/universal-bow-mounted-motor-lift-release-kit-with-internal-routing
@@bonafidefish Thanks!
@@bonafidefish I just installed the drop / raise kit on my PWR. Super clean. Thanks again!
What rating are those anderson plugs?
So nobody hurts themselves. Man you aint wrong 🤣
When are the wire kits available? Couldn't find them on the website.
There are available now and can be found here: bonafidefishing.com/collections/motorization-kits
Is the cover for this boat that you guys sell on your website waterproof?
Do you have to mount the breaker on the hatch? Or can u leave it laying in the bottom of the boat?
You do not have to mount the breaker on the hatch but we do not recommend laying it in the bottom of the boat. An alternative is to use our new "Computer Plate" which mounts inside the bow of the PWR for attaching electronics. It is in stock and can be found here: bonafidefishing.com/products/pwr129-computer-plate
@@bonafidefish thank you so much!! any tips on how to install the plate?
@@thomasallar169 It is super simple - we basically send the plate with double sided taped foam strips and it slides right up into the bow of the kayak. The tape adheres to the kayak and to the plate.
@@bonafidefish thank you so much!!
Can i leave the xi3 on the kayak while transport it with my trailer trailer?
Thank you for reaching out! We recommend removing your Xi3 for transport.