How to Fix Dreamcast Disc Reading Errors

Поделиться
HTML-код
  • Опубликовано: 5 дек 2024

Комментарии • 94

  • @dadncaleb
    @dadncaleb 3 года назад +3

    DUDE I THOUGHT I WASTED $40 on a bricked Dreamcast but after watching this video and using your technique I am happily playing code Veronica. Thank you so very much!!!

  • @redfanrod
    @redfanrod 3 года назад +5

    Spent a good hour tinkering with this. Cleaned the laser with "iso" alcohol, then I think I turned the screw too far to the right. Turned it counter clockwise about a half turn... and it (finally) worked. Back to Crazi Taxi! Thanks.

    • @HansKJohnson
      @HansKJohnson 3 года назад +1

      Thank you for this comment. I tried turning mine clockwise the first time and I still had the same problem. Then I tried turning it counter clockwise (maybe a quarter or half turn past the original position) and it worked!

  • @Laconia0940
    @Laconia0940 5 лет назад +2

    I couldn't remember where the motor control was!!
    Another Dreamcast repaired!
    Many thanks sir, you're a lifesaver! ^_^

  • @sirlani6152
    @sirlani6152 5 лет назад +1

    I can vouch this method works. Found my old dreamcast and it wasnt reading disc at first but after following the turtorial its working like a champ. Time for some good ol MvC2 and PowerStone.

  • @KewelsBri
    @KewelsBri 4 года назад +4

    Worked after a couple of tries, thanks. That ribbon cable ended up coming out for me, and getting that thing back in is NOT fun, but doable.

  • @SafetyRabbit
    @SafetyRabbit 9 месяцев назад +2

    I’ve got this problem as well, but I really needed to see exactly how far to twist that potentiometer. It’s obscured both times you made the adjustment :( I know this was a while ago but do you happen to remember how much of an adjustment it was? I’ve spent hours tweaking it back and forth with little result. Sometimes the disc spins up to full speed, then just slows right down. It never reads though.

  • @gamerfly101
    @gamerfly101 8 лет назад +1

    Thanks mang, at first I tightened it a bit too much and the disc was going at rapid speed. Then after loosening the screw it went too slow. After tightening just a tad bit, it started reading discs! Thanks for the tut my dude.

    • @letsgonow5641
      @letsgonow5641 8 лет назад

      its tricky...a hair too much it goes super speed up..too far back too slow..its only like a hair difference..

  • @c_era_una_volta
    @c_era_una_volta 4 года назад +4

    Hi excuseme an you help me? My DC read game disc ... I canmove on startinh option, but when i start to play go in CRASH . Video remain blocked. Manily with sega rally, f355 and other games. With other i can play normally. What can i do? Please help me . Thanks

  • @shunhensley
    @shunhensley 5 лет назад

    Thank you so much for this tutorial. I hadn’t played my dreamcast in a long time and found it being unable to read the discs. Found this video and you saved the day. Long live Sega 🤘

  • @Climhazard
    @Climhazard 3 года назад +1

    Good vids like this still around help the gaming community. Thanks, fixed my cast.

  • @ThatOldSchoolMagic
    @ThatOldSchoolMagic 7 лет назад +1

    This actually worked. I thought it was the pins that were dirty on the power. Liked and faved

  • @pinken
    @pinken 5 лет назад

    Thanks for this video man. Just bought two defective units and fixed the controller boards. One of the units also had this problem, tried your fix and voila! Got two fully functional units now. I smashed that like button like light punch in marvel vs capcom.

  • @xavierguzman4812
    @xavierguzman4812 7 лет назад +3

    Holy crap this fix actually worked for me! Hell yeah!!!! Crazy Taxi here I come

  • @alanjuarez2317
    @alanjuarez2317 6 лет назад +15

    I didn’t know Jeff Goldblum played Dreamcast

  • @bonesjones1658
    @bonesjones1658 2 года назад +5

    If you're going to block the view or not zoom in at all, you might wanna describe how far you turn the screw. Someone could screw up their system.

  • @deadringerfpv6412
    @deadringerfpv6412 6 лет назад +2

    crazy taxi time!!! This really helped me Alex. Thank you

  • @TheRetroPerspective
    @TheRetroPerspective 7 лет назад +3

    It kinda worked but then it kinda didn't. Started reading but crashing or having the music cut out after a certain amount of time. Eventually I couldn't seem to find that sweet spot again so now it's not reading at all =(

  • @Will-nm7vy
    @Will-nm7vy 4 года назад +5

    Still works in 2020 thx man!!

  • @charliezilla685
    @charliezilla685 6 лет назад +2

    I did exactly what the video told me and when I was done I saw the disc spinning and then I saw that the disc was stopping and going a lot and it slowed down and stops?! And it has the same error again?! I think there’s something wrong with the thing that makes the disc spin? I need some help please!!!!

  • @edwardchiu2905
    @edwardchiu2905 5 лет назад +2

    You've just saved my Dreamcast !!!

  • @DoswarePictures
    @DoswarePictures 4 года назад +1

    I have no idea how I fixed it but I did. Thanks a lot, now I can go back to THPS.

  • @GMmadness
    @GMmadness 5 лет назад +2

    Dolan, youre a genius!
    Thanks!

  • @johnd5307
    @johnd5307 6 лет назад +3

    Nice video🙂But it’s good practice when you take the cover off to open the lid first,then take it off,and the same when your putting it back,because you could break the pice in the back,and then it won’t spin.Besides that,nice job🙂🙂🙂

  • @SPEEDSTER7201
    @SPEEDSTER7201 6 лет назад

    Had a problem with my Dreamcast only reading games when the lid was partially opened, but tightening the potentiometer worked perfectly, in less than 5 minutes. thanks!

  • @dannyvaughn4489
    @dannyvaughn4489 3 года назад +1

    Spot on, fixed my Ebay return now I can sell it and save a loss. Thanx.

  • @calvindejong4566
    @calvindejong4566 7 лет назад +2

    For me When I powered it on, The disc reader goes to 1/4 regular reading speed for about 3 seconds then stops for 5 seconds & keeps looping.

  • @jesses9899
    @jesses9899 2 года назад

    Thank you, you guys are a genius, my dreamcast works again

  • @benjamindupont3522
    @benjamindupont3522 5 лет назад +3

    I can't wait to play Shemue now after all those years 😁

  • @leecroft1983
    @leecroft1983 2 года назад

    I think due to the GD rom drive constantly in motion and vibration of the spinning disc this causes the screw to move over time. The screw only needs to be very slightly off to cause issues.

  • @federton5
    @federton5 5 лет назад

    Thx man i forgot this was a way to fix it, i didn't remember the screw of the disc lens until i saw your vid, now playing PSO online again :D

  • @dennisburke199
    @dennisburke199 4 года назад +4

    Whoa easy on that cog, ouch! It helps to grease the gears/cogs with a LITTLE petroleum Jelly. You're adjusting a POT for the laser right now. Increasing/decreasing the resistance. Anyway making adjustments on the laser has extended the life of so many Dreamcast systems I have. Bought them on Ebay with people claiming the eye is shot just to tweak the laser. Just bought one with no video. The guy didn't seat the PSU all the way. Had to replace GD-ROM from a cannibalized system that had a bad DAC. Speaking of, has anyone found an easy way to fix a DAC, or a bypass or something? If not I'll be troubleshooting traces for HOURS!! If someone has any info please help!! Thanks ;)

  • @nickravera4069
    @nickravera4069 4 года назад

    Thank you for this! Tried it out and got my DC to work.

  • @ametze07
    @ametze07 5 лет назад +1

    Worked. Just probably a 5-10 degree (very very slight) turn clockwise.

  • @tjerj1
    @tjerj1 4 года назад

    Thank you. Cleaning the lens fixed mine!

  • @ravenkline9524
    @ravenkline9524 7 лет назад

    This fix worked perfectly! Thank you so much!!!

  • @atsallthemsounds8304
    @atsallthemsounds8304 Год назад

    I appreciate this extremely random and irrelevant content given to me today. Thanks algorithm 👍

  • @f.a.modster788
    @f.a.modster788 3 года назад

    The only thing I didn't see or maybe you mentioned but I didn't hear is how much did you turn it a quarter turn? a half a turn? a full turn???

  • @fatefinger
    @fatefinger 3 года назад +3

    It kept turning and turning. You don’t show how much you turned it. I turned it clockwise over 50 times. Nothing.

  • @JamesGeraldEckertJr
    @JamesGeraldEckertJr Год назад

    I'll give this a try. I got two recently purchased from internet that are both experiencing this problem. Looks easy.

    • @suppaman12
      @suppaman12 10 месяцев назад

      How’d it go

    • @JamesGeraldEckertJr
      @JamesGeraldEckertJr 10 месяцев назад +1

      @@suppaman12 The fix shown in the video has no impact on actual system hardware. Both systems failed, by design. My old Dreamcast worked immediatley.

  • @djconvoy
    @djconvoy 6 лет назад

    This worked great for me on a DC I just bought off of eBay; thank you!

  • @WyattGoulet
    @WyattGoulet 4 года назад

    What tools you'll need?

  • @JohnTheD0n2025
    @JohnTheD0n2025 3 года назад

    Also what if the one original model I had from when I was a kid won't work with VGA boxes?

  • @kleadron
    @kleadron 6 лет назад

    Thanks dude, this fixed my Dreamcast!

    • @lovelorn88nick
      @lovelorn88nick 5 лет назад

      Its honestly a temporary fix. More then likely it's a sign of a dying laser

  • @JohnSmith-xx1lx
    @JohnSmith-xx1lx 7 лет назад

    It did work! Only come to find out my Dreamcast does not play burned games, it is the September 2000 model have i been lied to??

  • @louisemcmahan6858
    @louisemcmahan6858 3 года назад +2

    My game jet set radio it well load to the loading screen and kick me off to the home screen of the Dreamcast can anybody help me

  • @SevenDeMagnus
    @SevenDeMagnus 4 года назад

    Hi. Would you know if changed all the capacitor of my US Dreamcast all to solid capacitors make it read the games again (not even the CD can be read- music CD)? The Dreamcast is relatively new, it's not been used for a 1 week (24 hours each day) in total. It was working well the last time I used it but now it won't read, after being stored for more than 1.5 years.
    I already cleaned the lens with 99% alcohol but it now won't read. Suggestions are welcome.
    If yes, replacing all capacitors in the unit (except the modem) with solid capacitor, will fix this, is there a shop who sells a complete Dreamcast solid capacitor? If there's none, any list of all the unit's capacitors and values?
    I have another PAL Dreamcast, I've replaced it's GD-ROM but it keeps burning the chip in it, I wonder how this can be fixed. It first started when I left the Dreamcast for about 8 hours playing one song, from a music CD, in an infinite loop (I fell asleep).
    Thank you. Stay safe.
    God bless, Rev. 21:4

    • @rodrigomiranda8779
      @rodrigomiranda8779 4 года назад +1

      try getting the PSUs, power supply from ALiexpress or ebay. It might have happened that the capacitors might have leaked and damaged the PSU board.

  • @adamxftw
    @adamxftw 10 месяцев назад +1

    Iv adjusted this little fu*ker back and forth for a couple hours and gotten nowhere. Any suggestions anyone?

  • @dalohe82
    @dalohe82 5 лет назад

    Did all that. But it doesnt want to read the disc. I even turned the screw a bit more and more. And nothing :'(

  • @vulbina
    @vulbina 5 лет назад +1

    This actually worked!!!

  • @TheRealK2F
    @TheRealK2F 3 года назад

    Literally a live saver thank you it was the screw

  • @retrogeek6868
    @retrogeek6868 2 года назад

    Solved my problem, many thanks.

  • @retrohetero885
    @retrohetero885 2 года назад +1

    Broooooo thank you man!!!!!!! Pfffff ❤️🙏🏻

  • @lilman8720
    @lilman8720 2 года назад

    Thank You! You are a lifesaver.

  • @Jozzie1987
    @Jozzie1987 5 лет назад +1

    Thank you so much!! It worked!!!

  • @markmolino6091
    @markmolino6091 6 лет назад

    Could I try this same method to burned discs as well

  • @King_Of_Rapture
    @King_Of_Rapture 2 года назад

    What are you using to turn the screw? Its not a flat head or philips. I cant get it to turn.

    • @xdifficultviper9916
      @xdifficultviper9916 Год назад

      Just took mine apart yesterday, a small philips worked fine for all of the screws (including the lasers resistance) just be careful and take it slowly

  • @pineyro88
    @pineyro88 6 лет назад +1

    You sir have won a follower hehe thank you!

  • @mangotree9126
    @mangotree9126 2 года назад

    I know it’s been a long time but I did it and it worked but it broke off the thing so I can never twist it again. Do you think I’m going to need to twist it again in the future?

  • @benjamindupont3522
    @benjamindupont3522 5 лет назад

    Cool dude, it worked!!!! I guess I can now purchase a Dreamshell 😀

  • @jazzosazzo4279
    @jazzosazzo4279 4 года назад +1

    Worked for me, thanks

  • @indonsial9904
    @indonsial9904 6 лет назад +2

    it is just temporary fix & will burn the laser diode even faster

  • @VeeIn3D
    @VeeIn3D 7 лет назад

    Fixed it for me! Thanks!

  • @talksick508
    @talksick508 4 года назад

    Trying to fix mine I don’t have that piece on mine least don’t see it
    It was in a flood some rust
    So I’m not sure if that’s why it don’t read discs

  • @martindaley9977
    @martindaley9977 4 года назад +2

    Didn’t work for me.

  • @AmbientsonarVA
    @AmbientsonarVA 2 года назад +1

    Thank you so much

  • @eljuancitoq.v.3167
    @eljuancitoq.v.3167 11 месяцев назад

    Thanks it worked for me too!!

  • @nikostsaousoglou
    @nikostsaousoglou 5 лет назад +2

    πολυ καλη κονσολα...αλλα εχει και τα σχετικα θεματα...κυριως με θερμοκρασιες..και σκονη...προσεξτε το..και θα το χαρειτε...

  • @JohnTheD0n2025
    @JohnTheD0n2025 3 года назад

    What if it's only certain games that won't read?

    • @VictorColli
      @VictorColli 2 года назад +1

      Then it's the disc that doesn't read

  • @rogerchristensen2741
    @rogerchristensen2741 2 года назад

    Nice video, Thank you :)

  • @navext
    @navext 4 года назад +1

    Thanks a lot

  • @Myjacob99
    @Myjacob99 5 лет назад

    It worked I just had to turn my thing back the clockwise thing

  • @SyedJohnson
    @SyedJohnson 4 года назад

    That is gotta give it a try🤞🏾

  • @robertmiller2434
    @robertmiller2434 5 лет назад +1

    Worked

  • @haihuachen2627
    @haihuachen2627 2 года назад

    Capacitors bad? After so many yrs.

  • @jordangagat
    @jordangagat 3 года назад

    Check disc first if not help check a laser

  • @floyprod4899
    @floyprod4899 4 года назад +1

    Thx bro very cool guy

  • @charliezilla685
    @charliezilla685 6 лет назад +1

    Never mind I fixed it!!! Sorry

    • @vini4us798
      @vini4us798 5 лет назад +1

      How did you fix it, Mine did the same thing even after I did this.

  • @Yayatouu
    @Yayatouu 2 года назад

    Thanks for the tip, but I had this disc problem like... 20 years ago