Thank you so much💗 i really loved this!! I did one with lilac wire and white pearls and it looks so cute! The tutorial was very easy to follow, thank you again!
@@Cocoabeads ohh then is 21 gauge okay as well ? Cause I can’t buy 20 gauge , it’s not available but out of 21 and 19 gauge , which one would u say is better !?
You said they are easy to make, and I was thinking, sure they are, then I watched your video, and they really are easy. I Love Them. Thank You for sharing this.
I just tried it out and WOW. I’m not a pro but I think it turned out well for my first try! The tutorial was so helpful and I’m so happy I managed to do a ring!!
Welp, my beads weren't big enough to fit 2 wires through at the same time so my ring was cute but a failure 😪 Update: Got beads with bigger openings, gonna try again🤞 It worked! Super cute, I'm a little sloppy but with practice, it's going to be pretty!⚘💜❤💛🧡
Here are some tips on how I made this: I used 24 gauge wire and 4mm gemstones, (sometimes the holes are smaller than others so you may run into this, just try another bead). I cut the wire ends at a point to make it easier to get the beads on. 7" of wire require 10 beads and make a size 7 ring, add more if you want to make a larger size. (Thought I was going to run out of wire but I had just enough to finish it off) Always keep your middle two wire flat together, don't let them cross over while putting your bead on. Straighten your wire as you go along to keep the wire looking nice. This can also be made into a bracelet, I would suggest 6mm beads. That's my next project. I love the look of the braid against the stones. Thanks for the lesson!
Beautiful ♡ if I had the proper wire it might have came out as beautiful as yours, but I still love how it came out. Such easy instructions even though I had no sound on hehe♡ Thank you.
I know this was a very long time ago, but I was wondering if you did end up making it and if so, how did it go? I am interested in trying it out but I wanted to see if someone else tried and was successful before I try it out:)
@@Ash-us3gs yes I made one but it was really tight trying to get 2 wires into 1 bead so I suggest maybe going up a size with a bigger opening, I say try it, mine wasn't as pretty as this one in the video but it'll take some practice, good luck with yours♡
It's beautiful. Like to make a ring later, but it gives me idea for a necklace for my crochet doll that I'm doing right now. Hope it works out like I want it to.
DIY Cocoa Beads English hi, I think turn out great. How do u add a pic on here? Do u have a Facebook page? If u do I could post a pic of it on there. Let me know.
Yea! Look for me as Cocoa Abalorios in Facebook or I am on Instagram too but I let you the link down below anyway! Unfortunately RUclips doesn't let us add pictures yet...thank you! m.facebook.com/CocoaAbalorios/
It's always always looks easier than it actually is when you get doing it I could watch that thing 50 times and still have a hard time getting it to look like that LOL anybody else agree sure you do
Since bead holes vary, you may have better success with either a bigger bead (maybe 6mm) and/or smaller gauge wire. I’d say any gauge between 20 and 24 should work. Someone on here posted a tip about cutting the end of the wire at a point, to make it easier to get the wires through the bead. Hopefully this helps someone!
The beads I used in this video: bit.ly/2MFiGqE
Hi could you tell me what the bears are called in English so I can search them
Thank you so much for linking this, I've been trying to find similar ones but didn't have much luck
Did anyone get this link to load?
Hi, for all those wondering about the beads: 4mm Resin beads, sizes--» width: 1.7mm, hole 1.5 mm material: Resin
@@kristendavis7870 what’s the length of wire to start.?
That’s the first time I could actually tell how it’s made
Neat idea thank you
Super! Thank you to you for watching! ♥️♥️
This is actually a very cute idea and i love how you actually GIVE the measurement
Measurements are different for each person. Be careful with RUclipsr's measurements they can make you waste your materials.
Jesus Christ loves you
This is SO much nicer for a beginner than the rings that use 3 "legs" of wire instead of the 4 "legs" you use. Thank you❤
so glad that i’ve finally found a tutorial video that actually showed me exactly how to make this ring!
Love!!!! Usually I don’t watch videos without spoken instructions but this was perfect!!!!! Thank you!!!!
Thank you so much! Now I have my cousins homemade brithday gift :)
Thank you so much💗 i really loved this!! I did one with lilac wire and white pearls and it looks so cute! The tutorial was very easy to follow, thank you again!
Ohhh I'd love to see It 😍😍👏🏻👏🏻👏🏻
20 gauge wire and 17 mm or 7 inches that is what I saw kept having to pause and rewind :o)
Yes, 20 gauge copper wire and 7 inches or 17cm. Regards 💋
Oh ok, my wire was too thick. Thanks
@@Cocoabeads Hii ! Is 19 gauge wire good for making this as well ?
Hi, yes, It is ok, It is not very different to the one I used, just a bit thinner 😊
@@Cocoabeads ohh then is 21 gauge okay as well ? Cause I can’t buy 20 gauge , it’s not available but out of 21 and 19 gauge , which one would u say is better !?
Thank you so much for this I was able to make an infinity gaulet inspired ring with this tutorial 💛
Fantastic idea! Its like a mini bangle for your finger! Make on a larger scale as a matching bangle!
You said they are easy to make, and I was thinking, sure they are, then I watched your video, and they really are easy. I Love Them. Thank You for sharing this.
OMG these are so cute
I just tried it out and WOW. I’m not a pro but I think it turned out well for my first try! The tutorial was so helpful and I’m so happy I managed to do a ring!!
I had some 2 mm beads and matching 8 mm so I made a matching ring & bracelet. Thanks so for sharing this.
SO EASY!!! Super helpful and clear. Also nice music in the back!🎶
Welp, my beads weren't big enough to fit 2 wires through at the same time so my ring was cute but a failure 😪
Update:
Got beads with bigger openings, gonna try again🤞
It worked! Super cute, I'm a little sloppy but with practice, it's going to be pretty!⚘💜❤💛🧡
Ohhhhhh I'm sorry to read this
oo could you send me the link for the beads please ?!
mine don’t either haha :(
same here :(
i’m having the same problem rn so i ended up doing a 3 strand braid instead ;-; i think getting a slightly thinner wire would work too
Same here:(
I wish I could post a picture but I just made my first ring and it's super cute. Will be giving it to my mom's part of her birthday presents :)
thank you so much for this I am not a ring fan ....but once I made this I love this and am wearing rings like this now.....thank you xx
I LOVE THE QUICKNESS OF MAKING THESE GORGEOUS RINGS 💍 AND THANK YOU FOR SHARING THIS AWESOME VIDEO, AND IWILL BE DOING THIS RING 💍 PROJECT 👍😃🖐♥️♥️♥️♥️
Thank you so much for showing this !
Can you upload more wire rings tutorials
They really helped me
it reminds me of my Voicely friends! I adore talking to them in this app))
Here are some tips on how I made this: I used 24 gauge wire and 4mm gemstones, (sometimes the holes are smaller than others so you may run into this, just try another bead). I cut the wire ends at a point to make it easier to get the beads on. 7" of wire require 10 beads and make a size 7 ring, add more if you want to make a larger size. (Thought I was going to run out of wire but I had just enough to finish it off) Always keep your middle two wire flat together, don't let them cross over while putting your bead on. Straighten your wire as you go along to keep the wire looking nice. This can also be made into a bracelet, I would suggest 6mm beads. That's my next project. I love the look of the braid against the stones. Thanks for the lesson!
Beautiful rings. Simple and direct instructions. Thumbs up 😁
Beautiful ♡ if I had the proper wire it might have came out as beautiful as yours, but I still love how it came out. Such easy instructions even though I had no sound on hehe♡ Thank you.
This was such a good tutorial I am fairly new to jewellery making and I found this very easy to follow thank you! 😊 🙏
I really love these, I must try. I have not done any wire working. I hope it works for me. Carol
This is a very easy project to start wire wrapping so I'm sure you'll make it great! thanks for watching!💚💚
That extremely cute! I'm going make this today, thank you, I love it!♡
I know this was a very long time ago, but I was wondering if you did end up making it and if so, how did it go? I am interested in trying it out but I wanted to see if someone else tried and was successful before I try it out:)
@@Ash-us3gs yes I made one but it was really tight trying to get 2 wires into 1 bead so I suggest maybe going up a size with a bigger opening, I say try it, mine wasn't as pretty as this one in the video but it'll take some practice, good luck with yours♡
@@heidijones580 thank you so much for the response! That is so helpful and I’m excited to try!
Have a great night (or day or afternoon
@@Ash-us3gs you're welcome, have a great day as well 😀
@@heidijones580 😊
Very clear demonstration, I loved it, thank you :)
This was so useful thank you
Loved the design ❤❤❤
It's beautiful. Like to make a ring later, but it gives me idea for a necklace for my crochet doll that I'm doing right now. Hope it works out like I want it to.
That's a very creative idea! Love it!!! Hope it will work! Let me know!
DIY Cocoa Beads English hi, I think turn out great. How do u add a pic on here? Do u have a Facebook page? If u do I could post a pic of it on there. Let me know.
Yea! Look for me as Cocoa Abalorios in Facebook or I am on Instagram too but I let you the link down below anyway! Unfortunately RUclips doesn't let us add pictures yet...thank you!
m.facebook.com/CocoaAbalorios/
Very easy and beautiful. Thank you.
I made a bracelet using this method
It was beautiful and easy to make
this tutorial was great and relaxing to make! my ring came out perfect :D!!!
i'm 100% making these and then
making a stand to sell them for money.
p.s i love the idea, it turned out very pretty
I would love to see earrings made to match the ring.😊
Thank you so much!! Easy tutorial and beautiful ring!!
I made a bracelet like this and it was fabulous
Excellent, you gained a new subscriber
Wow thanks I followed this vid & made a really cute dupe!! Super easy to follow along! Tysm for the inspo.
Thankyou for your wisdom 🙂
So sweet I’m gonna try this awesome ring tomorrow
Wow! Gorgeous and so, so easy. Again Wow!!
I love this diy!!! I just finished my ring and it’s perfect!!! So easy and cute🤗🥰
Happy to know! Congrats!♥️♥️♥️
What brand of beads did you use? :)
How'd you get 2 wires into one bead?
@@Lia2222 probably use a bigger bead
@@Lia2222 no one replied. This is neat. Hobby Lobby should be able to help
Beautiful rings and very fast tutorial and Thanks
This is such a cute and easy idea
Can't wait to try this! Your voice is so relaxing. Thank you for sharing!
Easy and beautiful ring
This is gorgeous and I am def going to make some
It's always always looks easier than it actually is when you get doing it I could watch that thing 50 times and still have a hard time getting it to look like that LOL anybody else agree sure you do
Um
Yes I agree
Beautiful ❤️🥰 and easy for you but looks tricky for me 😆
I would love to make a bracelet like this ❤
Wow, these are so cool. I'm so going to try this, thank you.
This is so amazing I love them
Thank you very much! I am very happy to know you liked the idea ♥️♥️♥️♥️♥️
I love this so much pls keep up the good work
Lovely new design not seen any like it. New subscriber!👏🏻👏🏻💕💕💕😍😍❤️🇬🇧🇬🇧🇬🇧
BEAUTIFUL! Thank you for posting!
i dont have wire cutters so i was using regular scissors and i cut the palm of my hand open while makinig this but the ring is so cute 😍
oh my God! Hope your hand is ok 😣😣😣 take care and look for proper tools they are quite cheap, your hands worth It!!
@@Cocoabeads haha thanks i'll be fine i promise!! and i'm gonna get some tools today :)
So easy, and so pretty.
THANK YOU SO MUCH GIRLY😻🙌
This is amazingly beautiful 😍 ❤ Best wishes
They are way too cool and simple to make. Liked it
Happy you like them ❤️❤️❤️
Thanks for sharing!! I made a red one and it turned out really good!! Great video👍
I am so happy to read that! Thank you for letting me know! ♥️♥️♥️♥️♥️
Beautiful! Thank u!
OMG!! It turned out so good 😍😍Thanks a lot!!
Simple and pretty.
None of my beads can fit the double wire through them. Are these a certain type of bead?? This is a very cute method. Hope I can do it justice ❤
Since bead holes vary, you may have better success with either a bigger bead (maybe 6mm) and/or smaller gauge wire. I’d say any gauge between 20 and 24 should work. Someone on here posted a tip about cutting the end of the wire at a point, to make it easier to get the wires through the bead. Hopefully this helps someone!
absolutely wonderful video, inspired me with some new ideas, thank you!
That's sounds great! I'm so happy to inspire you with my humble work! Thank you so much! ♥️♥️
Omg... I make this at home and its so pretty 😍
Easy and beautiful 😉
Lovely!
I love these rings!
ive made this, super cute!
This is so pretty :-) wow, thx for the awesome tutorial
I really love it, going to give it a try today
Beautiful 😍
No. I’m right there with you!
I used this video to make bracelets. TYSM
Nice, not to crazy about how it is finished. Maybe end it with a wire rose for a more finished look. I will be trying this
thank you for this helpful video! i just made my first ring :)))
They look so good! So easy to make with your tutorial. :)
Cool ideas!😻
Those are so cute
They look so easy and awesome thanks for the video❤️
This worked so well! This is amazing thank you so much, I’m so glad I watched this!!!!
Simply superb 😍😍😍💖💖❤❤
That's so cute!
Beautiful, and looks doable!!!
Super doable!
Beautiful ❤❤❤❤
Absolutely gorgeous.
Omg! Thank you so much! This was so easy to do for me and my best friend :)
These are absolutely stunning!💖 I was wondering if these could be made with 24 gauge wire?
I just made one with 24 gauge and it turned out good.
@@luna8295 thank you so much for letting me know!💖
@@Le-SWEETS No problem!
Sure! I have a couple of rings made with 24 gauge wire, I used beads with an smaller hole to get a better result. Regards!!
🌼I loved it! Thank you ✌️🌙
I made it yes! Tysm
Love these! So easy.
Thank you! Hope you can make some for your own!! ♥️
You are genius
Love it ! 😍😍😍😍
Nice job🙏❣️🙏
So beautiful