Nice little bash session 👍👊 those 8s rigs are definitely pretty big to be flying.. but badass🤣 definitely have a sweet workshop for your collection. always love when one of your videos comes out 👍👊keep up the amazing job.
King Salami, love seeing your vids with the 1/5 rigs. Its a whole other level sending them big boys like that. Keep the vid's coming my bro. You're killing it and blowing up on YT quickly. Keep up the great content and give us more 1/5 action please. 🙏
Thank you brother appreciate that that 980 KV I believe is a 5680 Hope that helps you brother and I’ll try to do more 1/5 RC‘s in the future I am re-doing my 5B now
That is a beast and a half flying through the air omg lol that slo mo on the bk flip goin towards the road was timed to perfection brother, epic run 🤙👊💪👍😉
Thank you bro I like flying them 8s rigs I just don’t like the set up two batteries and all not to mention they’re heavier than hell to be lugging around yeah I don’t have far to go but I do have to get them off the shelf and onto the ground 😂🚀💪👊
Thanks bro i used to really like sending the big RC‘s I just love how they sound when they slap the ground I still like to get them out from time to time🚀💪💪👊
Big Girl can fly! She got Power for days! King 👑 Salami almost got taken out! 😱😬🤣. That was Nuts!! 😳😂. Killer session Bro! It's truly amazing to see how much these massive trucks can do. Loving those super plush landings. Awesome rundown of your station and Rigs. Bash my friend!
Thanks so much bro she does land nice with the M2C shock pistons and 7 mm shafts matched with the HR bladder less caps makes for a plush landing that’s for sure🤩🚀💪🔥👊
Nice brother.... M2Cified FTW man, love all the other little bits mixed in as well😍😎👍 Great rip in that Florida heat... Might have to gear down a tooth. Yeah them esc shrouds in skeptical of, I have one I'm afraid to use🤔😂 Nice Run down of your crazy amount of rigs and parts 💵💸💸😂😂.... That shop setup is sikkk. Do you have AC out there?
Thanks Dennis glad you liked it yeah it definitely gets hot out here in the garage I haven’t had AC out here but I did just purchase one of those commercial grade rollaround AC units with hoses where I plumbed it out the window it’s not a window shaker I guess you would say it’s a next step up works well though👍🤩👊
Soo good! it is amazing what those big rigs take but you must have built them well and mainly land well with them skills as have seen many others break em and say how easy it is to do when so heavy... I finally got some good weather, went out with my go pro and was all set, then a mum walking past on her phone was happy to let her kid lay down all over the track.. should have scared them off with a massive thud nearby but wouln't wanna risk hurting anyone. Went out the next morning and my gopro battery was dead :( .. then a sketchy looking rear outdrive finally went on a landing so ordered some gpm ones which claim to be harder than stock and were cheaper too..al ready for more power... at least it was the last diff I had left, to rebuild with thicker oil :).. was supposed to be my last run on old motor to have a comparison video but just want to get that new setup in there now that I have it :) ..... got 5 pack of pinions to mess with on the way too as almost got a 21 then realised I wasn't Aldo lol and found others were using 19 and 20 so I'm good from 18-22.
Thanks so much Bradlei i’ve had my share of issues with the 8S rigs but once I got them built to my liking they seem to hold up pretty well besides some minor electronic issues I am going to go back to the stock arms I’m just tired of bending shocks that’s one of the reasons I stopped running them as much as I used to I like to run Rc’s that have minimal damage a broken cup from time to time I can live with a shock rod end I can live with but $100 part start failing that’s a different story all right brother well good luck with everything you got going on there Gear up brother gear up😂🚀💪👍
Thanks Lil bro I agree that was way too close for comfort but it was fun👍 I will definitely keep doing it I just need to be more careful in the future The K8 with this motor set up is a beast🚀💪🔥🤩👊
Thanks bro my wife comes out from time to time when the kids are out there she’ll run one but typically she just watches on the sidelines gotta keep coming them involved so you can keep doing what you love😂🚀💪👊
@@AldoLoyal Wow thats great good to have some family support my wife is home and just watching my vids on youtube lol. yeah i gotta bring my son out too with his big rock. Great bashing brother keep it up.
Hello Aldo krkrkr :)! Wow damn rc car battery for bash, how many years have you had this passion if it's not too indiscreet? Great sending the Kraton 8S to the moon, great fun man Can't wait to see King Salami next bash session haha, tchouss ;)
Thanks Nels RC 🤙 no bro I don't mind I've always been into RC at least as long as I can remember my uncle used to own a hobby shop here in the town I'm from they are real big into flying but I lost my way for a few years got back into it about 2 1/2 years ago and been going strong ever sense I just got into doing RUclips about three months ago I've been thinking about that for about a year but my wife finally talked me into doing it so here I am sorry for the long response bro I'm glad you're enjoying my videos a lot of rain here in Florida right now and more to come this weekend I'm trying to get out and bash as much as possible so I will get another video up as soon as possible happy bashing bro🚀💪🤩👊
@@AldoLoyal Ah it's so cool to have a model shop near your home and what's more family haha, your wife did well to insist that you share your passion for bash it's great, I like to see jump your machines on these big MX bumps! It's also raining in Fr right now haha it's stormy season coming up here too! Thank you King Salami for the content it's great, peace and enjoy!
Great bash as always Aldo! Love the workshop and the selection of rigs.. got a question for you about the new style badlands 5.7 you are running. Have you been cracking the rims at all? Man, I've cracked all 4 of the first set within a month. Got them replaced through horizon. Now 3 of the new set are cracked in the same place. Got maybe 5 packs on them. Just curious kif you have run into that issue. Thanks for the great content and humor as always. Look forward to your vids daily now. Keep bashing brother!
Thank you Daniel no I have not had a problem with them at all I have had the tires come unglued a couple times but once I re-glued them myself I have not had an issue with them🤩🚀💪💪👊
Great video man but question for you. I also have a Max5 and a TP 1270kv geared 26/39 it runs awesome except when I hit wot, it slows down and limited power. Then I lay off the throttle for a second and it lets me wot again but then it does the same thing. I have GCRC Maximus fans on the motor and esc so temps are low. What do you think? Thanks for any input!
I’m not sure on that one never had that issue. I do know the TP motors work better with castle ESC‘s I don’t run a max five with a TP motor anymore. Too much cogging. Thanks my friend. Hope you get it figured out.
Thank you buddy I really don’t know what went wrong I’m at a loss everything looks good on both connectors the one QS8 on the Lipo it was completely burned up on the inside of the bullet Musta had a bad connection but I can’t be sure I’m gonna try changing the connectors out and run it again and see what happens never had an issue with those at all🤷♂️👊👊
@@AldoLoyal I had the same problem smoked connections!. Someone with the same experience said that the connectors just comes lose and not all the way in! Try zip tying the connectors and see what happens!
@@rceskimo8229 yeah they were bro that’s what was weird about the whole situation you couldn’t push them in any farther I don’t know what it’s called but the red stuff inside the bullet that makes the anti-spark that was completely melted thinking that’s what caused it but I don’t know what caused the heat
I think the TP motor is a lot more powerful but the magnets are so strong it works as a break when you let off the throttle so that really did not work for me flying them like I do I would let off the throttle in the air and it would work like a break and Roll me over I think they’re more speed runner type motors
We’ve been getting a lot of rain bro my jumps have big holes at the base of them from all the rain I worked on them today a bit I’m planning on running the fire team tomorrow afternoon so I should have a vid tomorrow or the next day bro thank you man🤩👊
This is the EXB it comes with two Spur gears I’m not sure what the one that is installed stock is but the optional spur is a 39t and that’s what I’m running.
I guess you could look at it in a couple different ways. Castle motors are awesome but I have smoked them froze them up from overheating them. TP motors are awesome as well. They do run hotter, but I have yet to blow a TP motor. I’ve had them over 300°, and nothing happened to them From a performance standard, you can’t really tell a difference at least doing what I do with them you can’t the main reason I run them is it’s different not too many people run them, and I like the looks of them
Nice little bash session 👍👊 those 8s rigs are definitely pretty big to be flying.. but badass🤣 definitely have a sweet workshop for your collection. always love when one of your videos comes out 👍👊keep up the amazing job.
Thanks Brian I’m glad you’re enjoying them my friend and Thank you again🚀💪🤩👊
i hope you notify Nasa every time you take flight with those huge aerials. nice man cave. stay safe bro.
Thank you so much my spot is a mess haven’t had much time to clean it or keep up on it happy Bashing bro🚀💪🤩👊
The backyard every basher needs! Wicked bash as always
Thank you so much I’m glad you like it 🤩🚀💪👊
King Salami, love seeing your vids with the 1/5 rigs. Its a whole other level sending them big boys like that. Keep the vid's coming my bro. You're killing it and blowing up on YT quickly. Keep up the great content and give us more 1/5 action please. 🙏
Thank you brother appreciate that that 980 KV I believe is a 5680
Hope that helps you brother and I’ll try to do more 1/5 RC‘s in the future I am re-doing my 5B now
That is a beast and a half flying through the air omg lol that slo mo on the bk flip goin towards the road was timed to perfection brother, epic run 🤙👊💪👍😉
Thanks big Al appreciate you bro🤩👊
Haha that was real close Big Salami. Excellent video again, entertainment guaranteed and a phat collection of cars!Nice🤘
Thank you so much that was very close when I could feel my pant leg move yes sir very close😂thanks again happy Bashing🚀💪🤩👊
I love seein' the big boys flyin dude. Be careful out there dude! 1000 Subs comin in HOT! Right on.🔥🔥🔥
Thank you bro I like flying them 8s rigs I just don’t like the set up two batteries and all not to mention they’re heavier than hell to be lugging around yeah I don’t have far to go but I do have to get them off the shelf and onto the ground 😂🚀💪👊
@@AldoLoyal hahaha use the bucket of the tractor!
Dude!! Those are some big sends with the K8S 🚀🚀😱
Thanks bro i used to really like sending the big RC‘s I just love how they sound when they slap the ground I still like to get them out from time to time🚀💪💪👊
Big Girl can fly! She got Power for days! King 👑 Salami almost got taken out! 😱😬🤣. That was Nuts!! 😳😂. Killer session Bro! It's truly amazing to see how much these massive trucks can do. Loving those super plush landings. Awesome rundown of your station and Rigs. Bash my friend!
Thanks so much bro she does land nice with the M2C shock pistons and 7 mm shafts matched with the HR bladder less caps makes for a plush landing that’s for sure🤩🚀💪🔥👊
what an amazing session brother Aldo ❤. The K8s looks good with the tppower in it.
Thank you so much Thomas she’s a beast just need to change out one ESC connector and I’ll be good to go with that one🤩👊👊
Aldo, that is the squirrellyest car I own! You almost got taken out! Be carful! And when you learn the secret how to tame that beast, let me know! 🤣
Thanks bro sorry man I didn’t catch this until just now I love this rig the only downside is two lipos more work to get her out but she rips🤩👊
Nice brother.... M2Cified FTW man, love all the other little bits mixed in as well😍😎👍
Great rip in that Florida heat... Might have to gear down a tooth. Yeah them esc shrouds in skeptical of, I have one I'm afraid to use🤔😂
Nice Run down of your crazy amount of rigs and parts 💵💸💸😂😂.... That shop setup is sikkk. Do you have AC out there?
Thanks Dennis glad you liked it yeah it definitely gets hot out here in the garage I haven’t had AC out here but I did just purchase one of those commercial grade rollaround AC units with hoses where I plumbed it out the window it’s not a window shaker I guess you would say it’s a next step up works well though👍🤩👊
Awsome rip brother 👍 i love my k8s EXB! Things a beast 😈
Carry on ripping dude 😎
Thank ya Bro its A amazing rig power for days with the TP POWER MOTOR🚀💪🤩👊
Thank you for showing the shop
No problem bro hope you enjoyed it
you are funny as hell bro crack me up every video badass video again bro keep rippin and ill keep watching hella ya!!
Thank you so much Robert🥰 I’m glad you’re enjoying it man I know I’m having fun with it I’ll keep them coming the best I can🚀💪🤩👊👊
Big collection !! Amazing rc cars !! 🤘🏻🤘🏻🇫🇷🇫🇷🤯💪🏻😎
Thanks ya bad boy Bashing🚀💪🤩👊
Good video. 😀👍
THANK YOU🤩🚀💪👊
Thing even sounds like beast thumbs 👍
Thanks 😎 I just love how it sounds when the chassis slaps 🤩👊
Solid
Nice
THANK YOU NIKK.🚀💪🤩👊
Wow !!!! That's scary close to be getting hit by a 30lb + truck !!! But great jumping !!!!
Thanks bro I get hit all the time it’s a common occurrence at the meat pit😂🤩👊
You got you some on that bash! What a beast of a rig 💪🏻💪🏻👍🏻🤙🏻
Thanks patriot good luck on that jump competition bro🤩👊
Soo good! it is amazing what those big rigs take but you must have built them well and mainly land well with them skills as have seen many others break em and say how easy it is to do when so heavy... I finally got some good weather, went out with my go pro and was all set, then a mum walking past on her phone was happy to let her kid lay down all over the track.. should have scared them off with a massive thud nearby but wouln't wanna risk hurting anyone. Went out the next morning and my gopro battery was dead :( .. then a sketchy looking rear outdrive finally went on a landing so ordered some gpm ones which claim to be harder than stock and were cheaper too..al ready for more power... at least it was the last diff I had left, to rebuild with thicker oil :).. was supposed to be my last run on old motor to have a comparison video but just want to get that new setup in there now that I have it :) ..... got 5 pack of pinions to mess with on the way too as almost got a 21 then realised I wasn't Aldo lol and found others were using 19 and 20 so I'm good from 18-22.
Thanks so much Bradlei i’ve had my share of issues with the 8S rigs but once I got them built to my liking they seem to hold up pretty well besides some minor electronic issues I am going to go back to the stock arms I’m just tired of bending shocks that’s one of the reasons I stopped running them as much as I used to I like to run Rc’s that have minimal damage a broken cup from time to time I can live with a shock rod end I can live with but $100 part start failing that’s a different story all right brother well good luck with everything you got going on there Gear up brother gear up😂🚀💪👍
Big Bro that was too close,awesome bash on 8s 🔥🔥🔥
Thanks Lil bro I agree that was way too close for comfort but it was fun👍 I will definitely keep doing it I just need to be more careful in the future The K8 with this motor set up is a beast🚀💪🔥🤩👊
TP BOI!!! ye CUZ!!
lets go my brother... GIVE THEM SOME👍🔥🔥
Thanks so much bro🚀💪🤩👊
Great vid brother
Thank ya sir 🚀💪🤩👊
Damn bro, king Salami almost got sliced thin!
Bro you just made me laugh thank you that’s damn sure right I almost got sliced thin😂🚀💪👊
NICE collection you got there ALdo. Wait your wife plays with these toys too? That's Kool mine my wife keeps nagging me about them lol.
Thanks bro my wife comes out from time to time when the kids are out there she’ll run one but typically she just watches on the sidelines gotta keep coming them involved so you can keep doing what you love😂🚀💪👊
@@AldoLoyal Wow thats great good to have some family support my wife is home and just watching my vids on youtube lol. yeah i gotta bring my son out too with his big rock. Great bashing brother keep it up.
What TP motor are you running? I know you said 970kv but I must of missed it if you said the model can. Thanks bro!
Hello Aldo krkrkr :)!
Wow damn rc car battery for bash, how many years have you had this passion if it's not too indiscreet?
Great sending the Kraton 8S to the moon, great fun man
Can't wait to see King Salami next bash session haha, tchouss ;)
Thanks Nels RC 🤙 no bro I don't mind I've always been into RC at least as long as I can remember my uncle used to own a hobby shop here in the town I'm from they are real big into flying but I lost my way for a few years got back into it about
2 1/2 years ago and been going strong ever sense I just got into doing RUclips about three months ago I've been thinking about that for about a year but my wife finally talked me into doing it so here I am sorry for the long response bro I'm glad you're enjoying my videos a lot of rain here in Florida right now and more to come this weekend I'm trying to get out and bash as much as possible so I will get another video up as soon as possible happy bashing bro🚀💪🤩👊
@@AldoLoyal Ah it's so cool to have a model shop near your home and what's more family haha, your wife did well to insist that you share your passion for bash it's great, I like to see jump your machines on these big MX bumps!
It's also raining in Fr right now haha it's stormy season coming up here too!
Thank you King Salami for the content it's great, peace and enjoy!
Great bash as always Aldo! Love the workshop and the selection of rigs.. got a question for you about the new style badlands 5.7 you are running. Have you been cracking the rims at all? Man, I've cracked all 4 of the first set within a month. Got them replaced through horizon. Now 3 of the new set are cracked in the same place. Got maybe 5 packs on them. Just curious kif you have run into that issue. Thanks for the great content and humor as always. Look forward to your vids daily now. Keep bashing brother!
Thank you Daniel no I have not had a problem with them at all I have had the tires come unglued a couple times but once I re-glued them myself I have not had an issue with them🤩🚀💪💪👊
8s close salami shave there Aldo.✌️
Thank you Johnny it was definitely a close one😂🚀💪👊
Great video man but question for you.
I also have a Max5 and a TP 1270kv geared 26/39 it runs awesome except when I hit wot, it slows down and limited power. Then I lay off the throttle for a second and it lets me wot again but then it does the same thing.
I have GCRC Maximus fans on the motor and esc so temps are low.
What do you think?
Thanks for any input!
I’m not sure on that one never had that issue. I do know the TP motors work better with castle ESC‘s I don’t run a max five with a TP motor anymore. Too much cogging. Thanks my friend. Hope you get it figured out.
@@AldoLoyal I have a Max4 laying around somewhere that I’m going to try. Still only going to run 8s though.
Nice run! K8 rips. Let us know what went wrong with the connector. I run those as well so that would be nice to kno
Thank you buddy I really don’t know what went wrong I’m at a loss everything looks good on both connectors the one QS8 on the Lipo it was completely burned up on the inside of the bullet Musta had a bad connection but I can’t be sure I’m gonna try changing the connectors out and run it again and see what happens never had an issue with those at all🤷♂️👊👊
@@AldoLoyal I had the same problem smoked connections!. Someone with the same experience said that the connectors just comes lose and not all the way in! Try zip tying the connectors and see what happens!
@@rceskimo8229 yeah they were bro that’s what was weird about the whole situation you couldn’t push them in any farther I don’t know what it’s called but the red stuff inside the bullet that makes the anti-spark that was completely melted thinking that’s what caused it but I don’t know what caused the heat
So which one's more powerful you think the TP power one or the other one you just ran
I think the TP motor is a lot more powerful but the magnets are so strong it works as a break when you let off the throttle so that really did not work for me flying them like I do I would let off the throttle in the air and it would work like a break and Roll me over I think they’re more speed runner type motors
Weathers not looking good man. Good luck with the storm.
Thanks bro I’m sure we’ll survive just lots of rain👊👊
When we getting more of the fireteam
We’ve been getting a lot of rain bro my jumps have big holes at the base of them from all the rain I worked on them today a bit I’m planning on running the fire team tomorrow afternoon so I should have a vid tomorrow or the next day bro thank you man🤩👊
Nice video bro. 39pinon 37spur? or 37pinion and 39spur?
Thanks man 39 spur 37 pinion
One word!!
SENT ha ha
Thanks Dan👍🤩👊
What spur gear comes in the kraton 8s
This is the EXB it comes with two Spur gears I’m not sure what the one that is installed stock is but the optional spur is a 39t and that’s what I’m running.
Is that tp motor better than the castle 2028?
I guess you could look at it in a couple different ways. Castle motors are awesome but I have smoked them froze them up from overheating them.
TP motors are awesome as well. They do run hotter, but I have yet to blow a TP motor. I’ve had them over 300°, and nothing happened to them
From a performance standard, you can’t really tell a difference at least doing what I do with them you can’t the main reason I run them is it’s different not too many people run them, and I like the looks of them
What wheels are them
MX57 badlands Proline appreciate it bro