dear indian dude who's lit, I thank you with alll my heart, all the way from turkiye, we're using your guidance for an UAV, letting you know at the end of the year, if we win the contest, tribute to you after beyonce, cheers.
Thank you,Great video...the code does not want compile" MPU6050_SCALE_2000DPS, MPU6050_RANGE_2G)class MPU6050 has no member named "begin" ".And what is the distance?and would you be nice clarifying which of MPU6050 lib have you used?b/c i checked in google and i found out many ppl are facing this same problem.regards.
Hello friend, I was interested in this joystick project and until today, a year later, I haven't seen the result of your question to the designer, how did you manage to solve the NPU code?
@@intisharalammisbahul9927 I have connected one without antenna module with receiver and another module WITH ANTENNA with transmitter...so what will be the range?
@@subhajithalder3358 the range will depend on which is the transmitter and PA level set in code. I assume you set to max? Truth to be told, I started learning to use them yesterday.
hello, thanks for this video i made the transmitter and receiver and their is a connection between them but i have a problem no channel on the receiver is resetting to 0 for example if i connect a led to a potentiometer CH the led doesn't turn off if the potentiometer is all the way down but i can increase the brightness of the led when i move the potentiometer up even servos don't move or the motor on esc ,i can control the throttle but not turn it completely off. the same happen with switches can't turn of a led but can increase brightness of led when turned on. please if you have any idea tell me thanks in advanced :)
Dear sir In transmitter ckt u need 3.3v supply for nrf module and u can provide it by using arduino nano directly like u provided in receiver. Then why u use 3.3v voltage convertor in transmitter pcb Please respond
The code does not work, it tells me an error in the MPU. It does not let me compile. Can you give me the correct libraries because the ones I installed do not work and it sends me that error 'class MPU6050' has no member named 'begin'
Hello friend, I was interested in this joystick project and until today, a year later, I haven't seen the result of your question to the designer, how did you manage to solve the NPU code?
Any chance you can make me a remote for my blink acton Qu4Tro using this. I know it’s a lot to ask, someone broke into my car and stole the remote and the board was at home. This board is sentimental, I have been trying for a year looking for a used remote but no luck, thank you in advance greatly appreciated!!!❤
I need nrf2401 customized bord can you give me Mai buy kar sakte tha par shipping price bahut jaida hia to kya aap mujhe transmitter and receiver ka ek board de sakte hain please
New sub here Great video. Hey my friend do you have away someone could contact you privately besides here? I would like your advice on a project that I am doing. And I got no problems paying you for your time and friendship. Thanks blessed be...
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
dear indian dude who's lit, I thank you with alll my heart, all the way from turkiye, we're using your guidance for an UAV, letting you know at the end of the year, if we win the contest, tribute to you after beyonce, cheers.
Bro your youtube channel is one of the best channels in electronics and the good part is you explain all wiring connections in detail..😇😇
After long time you made something unique. Or else all time you make home automation projects.
Good love it
WHAT component for JRX and the JTX is that just for Jumper ? or that's component???
I'm interested to. Did you find what is in that position?
which software you use for circuit diagram (not for pcb)
Thank you,Great video...the code does not want compile" MPU6050_SCALE_2000DPS, MPU6050_RANGE_2G)class MPU6050 has no member named "begin" ".And what is the distance?and would you be nice clarifying which of MPU6050 lib have you used?b/c i checked in google and i found out many ppl are facing this same problem.regards.
Hello friend, I was interested in this joystick project and until today, a year later, I haven't seen the result of your question to the designer, how did you manage to solve the NPU code?
Thanks for the wiring and code. Question what do the potentiometers control?
what software do you use for electronic diagram?
it was fritzing ig
Thats nice, but how would you recharge the Li-ion batteries? Also, no over charge/discharge protection?
The regulator does that. Li-ion batteries dont recharge you just buy new ones they are fairly cheap
How many channels doest the transmitter has
What platform did you use to draw the circuit diagram? (2.15 min - 3.30 min) please tell me..❤❤❤
what is the range of this transmitter and receiver?
1000m got antenna ones and 200m for the smaller ones. Depends on circuit though
@@intisharalammisbahul9927 I have connected one without antenna module with receiver and another module WITH ANTENNA with transmitter...so what will be the range?
@@subhajithalder3358 the range will depend on which is the transmitter and PA level set in code. I assume you set to max?
Truth to be told, I started learning to use them yesterday.
hello, thanks for this video i made the transmitter and receiver and their is a connection between them but i have a problem no channel on the receiver is resetting to 0 for example if i connect a led to a potentiometer CH the led doesn't turn off if the potentiometer is all the way down but i can increase the brightness of the led when i move the potentiometer up even servos don't move or the motor on esc ,i can control the throttle but not turn it completely off. the same happen with switches can't turn of a led but can increase brightness of led when turned on. please if you have any idea tell me
thanks in advanced :)
What is the component jtx and jrx and the connection?
Waiting for receiver,are you planning to do one right?
Can we control Quadcopter with it?
Thanks for the video. What is capacitor value that you used instead of 0.1uf ?
Yes reply
What is the application for drawing wiring diagram..?
Dear sir
In transmitter ckt u need 3.3v supply for nrf module and u can provide it by using arduino nano directly like u provided in receiver.
Then why u use 3.3v voltage convertor in transmitter pcb
Please respond
That way the voltage is much stable
You Can add nrf24 adaptor modules instead of capacitor and HW-775(Mh-CD42) module convert to 5V to 3.3V and charge&discharge lion or lipo battery.
Hello bro.....I want try it but i only have 2 ESP8266 NODEMCU can i use it instead of arduino nano?
Hello thank you so much
I can use this remote to controle a drone ???
which software did you use for the circuit designing?
fritzing
The code does not work, it tells me an error in the MPU. It does not let me compile. Can you give me the correct libraries because the ones I installed do not work and it sends me that error 'class MPU6050' has no member named 'begin'
Hello friend, I was interested in this joystick project and until today, a year later, I haven't seen the result of your question to the designer, how did you manage to solve the NPU code?
Desculpa amigo, essa pergunta eu tambem fiz para o nosso colega
@aberateklehaimanot9804, estou no aguardo de qualquer de nossos amigos
hi, can I change from arduino nano to Digispar Attiny85 Attiny85?
Attiny85 Insufficient pins
Sar ya resaver drone ma kam bhe karaga
Hola, se podría usar el joystick de nintendo switch con arduino?
What is the voltage of the capacitor?
100uf and 0.1uf
Game aap Ka nrf 24l01 Ka receiver Ka video nhi mil rha krispy us video ko upload kariya
This excellent friend! I hope to see soon an application of that control with an airplane. Greetings from Mexico
Any chance you can make me a remote for my blink acton Qu4Tro using this. I know it’s a lot to ask, someone broke into my car and stole the remote and the board was at home. This board is sentimental, I have been trying for a year looking for a used remote but no luck, thank you in advance greatly appreciated!!!❤
your website link is not working please give me the link of your website
Thank you for the video, I will go somewhere else now that is not trying to force me to download a program.
Which website u use for circuit?
Fritzing
Is ka receiver wali video nahi hai kya
Sir Can I control drone with it?
Jlcpcb charges so much for shipping
Bro I have want to this pcb design for own my project
Why capacitor is important
Can you make a drone with arduino and 180 dc motor
Thanks for video, can you please upload button code for reciever. i want to use 4 relays. with same transmitter
Mujhe aapka tranmiter and risiver wala vidio mil nhi rha
great video, i am not used mpu
I need nrf2401 customized bord can you give me
Mai buy kar sakte tha par shipping price bahut jaida hia to kya aap mujhe transmitter and receiver ka ek board de sakte hain please
I can't complie your transmitter code .
how to fix it?❤
Which programming language is this used in circuit
this may be c++ because arduino ide allows c++ language to program to Arduinos.❤
Bro can you make incubator with in low cost plz
so amazing bro, love it
Please part 2 bhejo sir
can you add display on it 🙂
recevier pins 🤔 Can you send me diagram
Bro u ordered 5 pieces, Can i get one piece ?
we need much more modified this code
Excellent ! I enjoyed it very much !
Bro where is the Arduino code???
Thanks for the wiring and code explanations. It's a great controller and your vid helped alot.
And pls don’t change the way of explaining things in future also..😇😇
Please make resiver module with arduino nano board 12 chennels rc aeroplane controller
superb!!!! nice one!
Very nice
the code you used in video and the code you provide on your website are completely different. can you explain mr. fraud
Nice man.
thanks bro
👍👍
Reten error
👍👏
❤️❤️❤️👍👍👍👍
Please 🥺 help me
Moore Ruth Thomas Deborah White Karen
like and sub bro
You are a lier there is no code her
New sub here
Great video.
Hey my friend do you have away someone could contact you privately besides here? I would like your advice on a project that I am doing. And I got no problems paying you for your time and friendship.
Thanks blessed be...