Good video - Showed me what I should expect when I use it in the future and good idea about the small hole in the foil, I would have just ripped it off.
thank you for the video. i agree with you 100%, the No Toil air cleaner method is the best i have experienced. i like to fill a bucket with water and cleaner solution, and another bucket with the air filter oil. submerge the air fitler into the oil bucket, then squeeze out the excess oil. works well, and some air filter oil will eventualy drip insde the airbox, but the air filter is definitely soaked and ready for use. it's also a good idea to use some air cleaner grease around the rim of the air filter to better seal the incoming air.
This is fine, however it chokes the bike down because the oils so thick on the filter, and if you run a two stroke carb it can even sometimes foul a plug because of the air mixture being off at low rpms with the lack of air. Just my 2 cents
@@241420ful i hear you, but i have not had any carb or spark plug issues. the trick is to squeeze as much oil as possible to fully coat, but also flow.
Thanks guys I’ve been using the cleaner wrong this whole time and wondering why I doesn’t work... been doing them in the sink and pouring the powder directly onto the wet filter and it doesn’t do a whole lot. Reading the directions might help 😂
Excellent instructions...just what I was looking for. Thank you. Do you bother to grease around the rim? Some say it's not necessary. If so, what product do you use. Thanks again
@@DirtBikingwithDonnie After research people use " Oxi Clean" with the main ingredient being "Sodium percarbonate" which is what no toil cleaner is believed to be.
So just buy what you need, you don’t have to buy the combo each time. Do you buy new toothpaste every time you replace your toothbrush? Dumb question, I’m guessing you lost most of your teeth.
Спорт
Glad this was the first video that came up, super informative without wasting any time
I'm glad it was helpful!
Good video - Showed me what I should expect when I use it in the future and good idea about the small hole in the foil, I would have just ripped it off.
Thanks for the overview! just got a KTM 2017 EXC-F and this produce would be great for it.
Thanks for the support & great video Donnie & Chase 👍
No-Toil Industries It’s one of our favorite products! We use a lot so feel free to send some our way. 😀
That cleaner is pretty impressive!
Super helpful, thanks bro
thank you for the video. i agree with you 100%, the No Toil air cleaner method is the best i have experienced. i like to fill a bucket with water and cleaner solution, and another bucket with the air filter oil. submerge the air fitler into the oil bucket, then squeeze out the excess oil. works well, and some air filter oil will eventualy drip insde the airbox, but the air filter is definitely soaked and ready for use. it's also a good idea to use some air cleaner grease around the rim of the air filter to better seal the incoming air.
This is fine, however it chokes the bike down because the oils so thick on the filter, and if you run a two stroke carb it can even sometimes foul a plug because of the air mixture being off at low rpms with the lack of air. Just my 2 cents
@@241420ful i hear you, but i have not had any carb or spark plug issues. the trick is to squeeze as much oil as possible to fully coat, but also flow.
Awesome. Thanks for the explanation.
Glad it was helpful!
Thanks guys I’ve been using the cleaner wrong this whole time and wondering why I doesn’t work... been doing them in the sink and pouring the powder directly onto the wet filter and it doesn’t do a whole lot. Reading the directions might help 😂
I'm glad the video was helpful. Thanks for watching!
Just buy sodium carbonate (soda ash) for the cleaner. Its literally the exact same ingredient no toil uses
You are hilarious I need to find a pic of my filter to show you really dirty.. Haha
Vegas RoManiac We need guys like you to test the true limits. 😂
Excellent instructions...just what I was looking for. Thank you. Do you bother to grease around the rim? Some say it's not necessary. If so, what product do you use. Thanks again
Good info, thanks for sharing.
Thanks for watching!
I just baught this oil for my yz250f hope it works as it should
Sameeee
i use oxyclean instead of the oil cleaner, but i use the green bottle for the oil (without alcohol)
That's crazy fast
It’s funny how twin air says you need to let their oil sit for 4 hours before putting the filter back in the bike.
Do you have to let the air filter fully dry before putting the oil on it?
yes! put it over a fan and you’re good to go after 30 mins/1 hour
@@jxsndvl222x thank you brother!
I was told surf washing up powder works for cleaning no toil oiled filters.
That's a good tip!
@@DirtBikingwithDonnie After research people use " Oxi Clean" with the main ingredient being "Sodium percarbonate" which is what no toil cleaner is believed to be.
@@killerconsoles517 Thanks!
No toil works very well, however not as tacky as I would like, and their cleaner to oil ratio is way off I've got lots of sphere cleaning lying around
You’re right, I don’t buy the combo sets anymore. I usually just buy the bottles of oil. Thanks for watching!
@@DirtBikingwithDonnie the rim sealer grease it comes with lasts half as long as the oil again
So just buy what you need, you don’t have to buy the combo each time.
Do you buy new toothpaste every time you replace your toothbrush?
Dumb question, I’m guessing you lost most of your teeth.
I think you put too little of oil
Maybe so. Thanks for watching!