Long shot since this video is ancient now but I got a v2 kit for my car and preset mode doesn’t work, whenever I go into preset mode and try and select one of them the controller resets itself just turns off and on kind of thing, does the same when I try to calibrate it too, manual mode however works fine
Will this system work with any air compressor setup? I have a 2014 ram 2500 diesel with full air ride already installed. It has an engine driven air compressor. Thanks.
got my kit installed but when i go to use a present is says: NOT TUNED i did the calibration and set all the presets but nothing will work in PRESET mode. only manual mode works. do i need to do another calibration? thanks
Hey i bought a 6y rambler and it came with this airluft system now i lower the car a few months ago and didnt drive it and turn off the airlift system but just a few days ago i tried to raise it up and now my compressor wont turn on
To bad they forget to tell you cant use your presets if you got air struts with sleeves bags since they need more pressure to raise I'm stuck using manuel mode have you guys made any updates to the software to fix this issue ??
How does it level side to side with the car having different weight from side to side?? I can't make up my mind between the v2 and the accuair e-level. But the hight sensors seem like they would be more accurate side to side. Thank u look forward to your response
T C Thanks for the great question! The short answer is the V2 system does not automatically adjust for weight differences side to side. However, if this is a situation that you frequently encounter, we have 8 user programmable presets you can use after determining the pressures necessary to level the ride. Then a level car is just a double click away! Another benefit is the ease of installation of the V2. The wiring is very simple and there is no figuring out height sensor locations etc. And you can always tell how much air is in the tank or the springs because we have those values prominent on the display. Hope that helps!
I just installed V2 on my 2011 Honda Civic & I’m pretty satisfied! 🔥
just installed on my 05 xb. couldn't be happier
Thank you for the quick response. And your answers were very help full. Thanks again
lol @1:25 Well i wanna see you do it, thats why im on youtube....AND at @5:20 why does it say stopped/failed?
I noticed on mine I don't have the tank min option only max... whyyyyyy is that lol
i just got my kit for my 2010 accord, i cant wait to install it !!!!
Where is the next video from this that he talks about at the end?
Long shot since this video is ancient now but I got a v2 kit for my car and preset mode doesn’t work, whenever I go into preset mode and try and select one of them the controller resets itself just turns off and on kind of thing, does the same when I try to calibrate it too, manual mode however works fine
they got everything fixed, thanks
can't wait to get my installed..
What does the calibrate adjust do?
Was wondering what the drone noise is from. Is that constant when the air lift is engaged?
Love this setup on my 2013 tiguan
Will this system work with any air compressor setup? I have a 2014 ram 2500 diesel with full air ride already installed. It has an engine driven air compressor. Thanks.
Can't wait
what wire did you guys connect the pink to ?? im having problems with my autopilot v2 saying Comm error, and yes i did call airlift already..
Are there different controller options that screens small
got my kit installed but when i go to use a present is says: NOT TUNED
i did the calibration and set all the presets but nothing will work in PRESET mode.
only manual mode works. do i need to do another calibration? thanks
Is it safe to air out parked on a hill ?
Can I conecte the v2 controller to my 3s management?? Cause can’t sync the app to the manifold
How do I turn on the control?
Hey i bought a 6y rambler and it came with this airluft system now i lower the car a few months ago and didnt drive it and turn off the airlift system but just a few days ago i tried to raise it up and now my compressor wont turn on
I know this is an old video, but i got dust in behind my screen. Anyone know any ways to get it out?
My v2 won't calibrate?? It goes straight to manual mode and this is my replacement part too! Any help??
PonteLoco89 Sorry to hear that! If you hit up our support team, they will absolutely get this all sorted: www.airliftperformance.com/support/contact/
Does anyone has any problems with the compressor not working nor getting any air ?
WHAT IS TOGGLE MODE AND HOW DO I USE IT???? TY
On mine, I can only adjust the tank maximum, not the minimum. How do I change that
joe slater same issue here, did you ever find a way to fix this?
Same problem here
Thanks T C
To bad they forget to tell you cant use your presets if you got air struts with sleeves bags since they need more pressure to raise I'm stuck using manuel mode have you guys made any updates to the software to fix this issue ??
ace cuzz is it good now ? Did they fix ??
I'm having issues with my system not calibrating
When adjusting my tank I can only adjust Max pressure, not minimim
Got the same problem...
Same here
What does an L mean on the controller?
Did you ever figure this out? I get an L on mine sometimes
How does it level side to side with the car having different weight from side to side?? I can't make up my mind between the v2 and the accuair e-level. But the hight sensors seem like they would be more accurate side to side. Thank u look forward to your response
T C Thanks for the great question! The short answer is the V2 system does not automatically adjust for weight differences side to side. However, if this is a situation that you frequently encounter, we have 8 user programmable presets you can use after determining the pressures necessary to level the ride. Then a level car is just a double click away! Another benefit is the ease of installation of the V2. The wiring is very simple and there is no figuring out height sensor locations etc. And you can always tell how much air is in the tank or the springs because we have those values prominent on the display. Hope that helps!
Brother has this, works great ;p
can i upgrade from my manual setup to an auto setup?
Wondering this lol did you end up doing it ?
Mine is stuck at "ecu boot".
that's the compressor no it isn't constant
I live in LA CA any body knows who can install my Air Lift I have a 2014 Subaru wrx sti ?
Hit up Go-ez they do great work there in Anaheim.