Hi ollie. I love your passion for this. I wouldn't have come across you unless your latest video popped up.....your bravery humbled me more than words can say.....You are a credit to your family and just a absolute gem of a person. Sending you good vibes and know you are thought about by many people who have seen your video. I wish you the best of luck ❤
such a cool video I love this and the other more chill video you did with ur other mate. Ive just got into gas blowbacks and the mws platform thanks to your videos and I have to agree the mws comunity is so friendly and welcoming to even gbb noobs especilly with the tm discord. My friend has a vfc m4 and he asked a question in the vfc channel in hrc discord and no one could seem to agree on the answer very unlike the tm channel. I also noticed you were talking about the court in bristol which sadly closed before I got into airsoft but are there any sites you recomend in the bristol area? ive moved down here for uni.
I think you sold me on the bj tac trigger! Im not too keen on dropping a load of money on an entire trigger box. I have yet to remove to my stock trigger box though 😬
What trigger were you talking about arround 5:30-6:20 ?? I kinda want to upgrade my Tm mws trigger, i would love to have some kind of wall on the trigger before the setgo
Hey Ollie, big fan of your tech advices. I’ve got an MWS mag that’s leaking slightly from the top gasket next to the feed lips. I’ve taken it apart and even replaced the valve, but it’s still leaking. Any advice?
Sounds like there may be something that's either got caught in the threads or there's a bit of damage or dirt in there somewhere. If it's only coming out of the top then you'll need to take the valve out and check really closely where it outputs and see if you can see the problem
@@OllieTalksAirsoft hey Ollie, what size is the o ring you used for the part that deals the gas in the mag? For reference, the Original o ring was like a rectangular gasket below the valve System
Just thinking, I’m really fancying a revolver. And the Tanaka made with the Pegasus cylinder look really good. The only issue is the plastic parts I would rather all metal. I have seen there are some parts kits (are they worth it also?.) I donno what to do Tanaka has a good reputation and they make some cool stuff really fancy a snub nose too. The only other issue is finding one. Is there any good second hand sites you would recommend?
Hey Ollie! My MWS is having failure to feed issues that seem to be because of the magwell. When a mag is seated, I can wobble it about more than usual. When I push the magazine all the way up and keep it there, then send the bolt forward it then seems to chamber. Is there any fix to this, I've put tape on the inside of the magwell but it seems to only temporarily fix the issue, and obviously isn't long - lasting / ugly. I really need your advice on what to do, cheers
Just a quick one on mags, my tm mag runs 50 fps above my 2 gm mags and my De mag runs 20 fps above the gm's. Any ideas to get them all in the same ball park. Ps the De mag is a right pig to fill, i might have to change the fill valve.
TM it or don’t get one, the amount of times I bought something slightly cheaper then going all in and I end up buy the more expensive thing anyway so just go big straight away
Checking out past videos to see potentially what lifestyle leads up to stage 4 BC. Looks like processed/fast food is the issue. This makes me wanna stop eating fast food everyday. Im sorry that your going thru this. Bowel Cancers are becoming way more often nowadays. The foods sold here in America are so unhealthy but we have no choice then to eat it because they are in every corner and affordable.
@@DementiaDon I have IBS and i was told by doctor that i need to eat red meat. This fast food is risky, and to much beer also. Im so sad for Ollie but that tight jeans, fast food and beer are bad idea. Hope he is still here.
@@DementiaDon Fish? im eating chicken and it does well but hard to gain weight for me. Didnt know about fish, i eat tuna and sea fish mostly now, good to know its good for ibs. I promise that was on the paper what to eat.
Hi ollie. I love your passion for this. I wouldn't have come across you unless your latest video popped up.....your bravery humbled me more than words can say.....You are a credit to your family and just a absolute gem of a person. Sending you good vibes and know you are thought about by many people who have seen your video. I wish you the best of luck ❤
Nice said brother
Well said.
Hell yeah bro! Praying you have many more times like these in the future.
Im gonna watch all the vids on this channel.. and comment for the algorithm. Stay strong mate ... ❤
Great tune at the start. This was cool though, felt like I was with a couple of mates!
beers and airsoft, what could fit better?
Ben says 100% loads lol😂. Great down to earth vid
Have a shot every time I say it 😂😂
Burgers looked amazing btw 😊
They were actually really good, I was surprised
Video #7. Watching to boost
Oooooft Ollie talks airsoft on the sauce?! 🍻 😮 hope there’s a video tomorrow talking about your hangover 👍😅😅 good stuff as always dude
thanks buddy, yeah I actually filmed some gameplay from the next day so ill hopefully be able to get some fun gameplay footage from that uploaded soon
@@OllieTalksAirsoft Very keen to see that
We need more guys like that “one mission” sniper in the sport.
Looked like a good day 🙏❤
such a cool video I love this and the other more chill video you did with ur other mate. Ive just got into gas blowbacks and the mws platform thanks to your videos and I have to agree the mws comunity is so friendly and welcoming to even gbb noobs especilly with the tm discord. My friend has a vfc m4 and he asked a question in the vfc channel in hrc discord and no one could seem to agree on the answer very unlike the tm channel. I also noticed you were talking about the court in bristol which sadly closed before I got into airsoft but are there any sites you recomend in the bristol area? ive moved down here for uni.
i have the excact same glass cabinet thing with the pistols behind ben!
Boys showing off their toys
Love you man, take the best care of yourself!
❤
What's the extended charging handle you've got on your AKX? I've been looking for one for my own AKX.
its a Wii Tech one, it was actually pretty cheap and they ship worldwide too
I think you sold me on the bj tac trigger! Im not too keen on dropping a load of money on an entire trigger box. I have yet to remove to my stock trigger box though 😬
It's not to bad, If I can do it!
What trigger were you talking about arround 5:30-6:20 ?? I kinda want to upgrade my Tm mws trigger, i would love to have some kind of wall on the trigger before the setgo
it in his videos Bavtac Zet Plate Review
its a BJ Tactical trigger that Ben has, its really nice to be fair.
the damn mr beast burgers.....
Pov: scav and pmc after co-op extract.
🤣
This is like Hoplopfheil and brassfacts, but with airsoft
DE MWS mags are very good IMO, I use them in my DE Noveske GBBR
Can't wait to give it a go!!
Are you coming to NAF this year?
👍 yea
28:34 did he lose his thread adaptor lol?
Nah my front sight went flying lol, did find it and applied superglue😂
@@Nebyelrom lol I did wonder what it was
Hey Ollie, big fan of your tech advices. I’ve got an MWS mag that’s leaking slightly from the top gasket next to the feed lips. I’ve taken it apart and even replaced the valve, but it’s still leaking. Any advice?
Sounds like there may be something that's either got caught in the threads or there's a bit of damage or dirt in there somewhere. If it's only coming out of the top then you'll need to take the valve out and check really closely where it outputs and see if you can see the problem
@@OllieTalksAirsoft thanks for the fast reply. Appreciate it and will do!
@@OllieTalksAirsoft hey Ollie, what size is the o ring you used for the part that deals the gas in the mag? For reference, the Original o ring was like a rectangular gasket below the valve System
Just thinking, I’m really fancying a revolver.
And the Tanaka made with the Pegasus cylinder look really good.
The only issue is the plastic parts I would rather all metal.
I have seen there are some parts kits (are they worth it also?.)
I donno what to do Tanaka has a good reputation and they make some cool stuff really fancy a snub nose too.
The only other issue is finding one.
Is there any good second hand sites you would recommend?
Stick to the Dan Wesson revolver, they are amazing revolvers all metal and load using shells just like real life, takes co2 in Handel
where do you play the most and i hope to run my akx for the first time this saturday at the gaol ashwell
Hey Ollie! My MWS is having failure to feed issues that seem to be because of the magwell. When a mag is seated, I can wobble it about more than usual. When I push the magazine all the way up and keep it there, then send the bolt forward it then seems to chamber. Is there any fix to this, I've put tape on the inside of the magwell but it seems to only temporarily fix the issue, and obviously isn't long - lasting / ugly. I really need your advice on what to do, cheers
It may be the mag release, cheap fix, I’d be surprised if you have damaged the mag well
Just a quick one on mags, my tm mag runs 50 fps above my 2 gm mags and my De mag runs 20 fps above the gm's. Any ideas to get them all in the same ball park. Ps the De mag is a right pig to fill, i might have to change the fill valve.
Put marui release valves in all your mags, or whatever fps you want
im moving to gbb after fiddling with aeg gearboxs and having those delicate things break on me, whats your opinion on the vfc hk416?
TM it or don’t get one, the amount of times I bought something slightly cheaper then going all in and I end up buy the more expensive thing anyway so just go big straight away
Ever thought about doing gameplay vids?
Whats the red dot and mount on your mates hi capa 4.3? Please help 😅
It’s a vector optics frenzy, the slide is pre cut for an RMR which the frenzy has the same footprint 🤙🏻
On those MWS nubs teh wings break easily so be careful
Thanks for the tip, ill make sure I check
More AKX content pls…
I'm on it!
Ollie wouldve had cancer here, seems fine because he doesn't know.
Checking out past videos to see potentially what lifestyle leads up to stage 4 BC. Looks like processed/fast food is the issue. This makes me wanna stop eating fast food everyday. Im sorry that your going thru this. Bowel Cancers are becoming way more often nowadays. The foods sold here in America are so unhealthy but we have no choice then to eat it because they are in every corner and affordable.
Delete this comment mate please.
Alcohol and red meat are thought to be risk factors, and lack of vegetables and fruits.
@@DementiaDon I have IBS and i was told by doctor that i need to eat red meat. This fast food is risky, and to much beer also. Im so sad for Ollie but that tight jeans, fast food and beer are bad idea. Hope he is still here.
@@lorisdragelj6286 Red meat is definitely not good for IBS. Chicken or turkey is better, fish is the best.
@@DementiaDon Fish? im eating chicken and it does well but hard to gain weight for me. Didnt know about fish, i eat tuna and sea fish mostly now, good to know its good for ibs. I promise that was on the paper what to eat.