I’ve known maintenance workers with impressive fabrication skills who could repair and create nearly anything. Sometimes, they designed tools or machines that weren’t commercially available. I always thought of them as geniuses with higher intelligence than most.
@50:51 If anyone is wondering about the wrench and the drill. As the bit turns, you angle the drill up or down to find and keep the wrench in the center, to ensure a straight and level hole. 😊
I've known a few maintenence men who had the fabrication skills and ideas, like those here. They could repair and fabricate just about anything for any purpose. Sometimes, they made tools or machines that did not exist commercially. I always thought they were wizards with a higher IQ than most people. 😊
The the third tip, making a rod holder for welding, it would have been interesting to see how the cable was attached to the bolt, inside that hole in the handle. And take note, you never see the whole setup in operation, just the rod tip as it makes a spark.
I really liked the video because there were some great tips, but after the halfway point it was all just repeats of the first half. That was disappointing.
I really liked the video because there were some great tips, but after the halfway point it was all just repeats of the first half. That was disappointing.
NEXT VIDEO ▶ruclips.net/user/livexVSOgBHCQeQ
still rod broom high
@@maikpaetzold7084
😮😮😅😅😅😅😅😅😅😅😅😅😅😅😅
❤
Your tips and ideas are very helpful, thank you for sharing, have a nice day👏👏👏
@@maikpaetzold7084 ❤
I’ve known maintenance workers with impressive fabrication skills who could repair and create nearly anything. Sometimes, they designed tools or machines that weren’t commercially available. I always thought of them as geniuses with higher intelligence than most.
@50:51 If anyone is wondering about the wrench and the drill. As the bit turns, you angle the drill up or down to find and keep the wrench in the center, to ensure a straight and level hole. 😊
Hadir kawan
I've known a few maintenence men who had the fabrication skills and ideas, like those here. They could repair and fabricate just about anything for any purpose. Sometimes, they made tools or machines that did not exist commercially. I always thought they were wizards with a higher IQ than most people. 😊
This is a goldmine for anyone into woodworking! I took a ton of notes on these tips. Can’t wait to try out a few of them on my next project.
Поражают меня люди, имеющие в кармане батарейку, кусок фольги и ножницы вместо зажигалки или коробка спичек.
You have a fantastic way of explaining complex topics. I learned so much
Interesting video, some helpful ideas. But one must have nerves of steel to endure over 3 hours of that annoying music. Had to mute.
what a time to be alive. god.
you are very good😀
This content is always top quality!
loved your video! i was lookin to make a hole on a wine bottle nd i ended up with more ideas! thanks!!💡💡💡💡💡
Amazing compilations of 500 practical woodworking inventions tips and hacks. Interesting to watch. Tnx4sharing. Watching from DUBAI
Wow, how long did it take you to finish this project?
Albert freekin' Einstein! ! ! ! So cool it hurts! I JUST thought I had it , in the shop. This is going to be downloaded to my hard drive! ! !
Genius! 💡
All very interesting and practical video! THANK YOU FOR THIS HELP!
Excelente!!!
I like the video, I learn a lot. Thank you for sharing the knowledge. ❤❤❤
The the third tip, making a rod holder for welding, it would have been interesting to see how the cable was attached to the bolt, inside that hole in the handle. And take note, you never see the whole setup in operation, just the rod tip as it makes a spark.
Very interesting video it helps a lot
Lo de la abrochadora estuvo genial !! Bueno.... todos en realidad. Muchas gracias!!!!
😊
I learned so much
Who are you? Amazing! Sx
Спасибо❤❤❤❤
Bạn thật khéo tay
Nice
Very good
Trabalho top demais mandou muito bem
Which chemical or tool company sponsored this video?
Not bad, not bad.. Some smart ones here
Muy buenas las rimas finales!! Me encantaron!!
I really liked the video because there were some great tips, but after the halfway point it was all just repeats of the first half. That was disappointing.
He also added a layer of sand paper. It was almost the same color as the pastboard.
супер!!!!!
When you don't show what kind of spry you use to remove ther permanent marker is this hack makes no sense !
The less I throw away & waste, the more I have to work with. Instead of throwing it out, imagine what can be made from it. Imagine.
I belong to the beautiful city of Baltistan, Pakistan. I am a carpenter.
Ни фига, он перескочил со всевозможых "лайфхаков" на плотницкие хитрости. 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
WHAT DID HE SPRAY TO REMOVE THE MAGIC MARKER?
hair spray
Gostei ficou perfeito mandou muito bem
Why did he drill two holes to only fill them up with tiny pieces of wood
That all great until the sand paper wares down then it’s not good anymore
nice👍🏻
Ну прямо, золоторукий плотник! По ходу супруга на тебя нарадоваться не может. 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
Learned something new, they have somewhere wood pipes, that one can buy! You don't have to make them yourself!
А, по 3 - 4 раза в одном видео одно и тоже интересно смотреть? "Так можно было? "
dowels are end grain, won't hold as well.
Some good ones in here, some that made me laugh so hard like the wire and nails.
Al final hizo una helice ..?
Why did he drill big holes in the wooden snow flakes
1:43:25 really?
Really amazing body thanks for all.
+
utilidades pra quem acabou de aterrizar no planeta terrra 🤣🤣🤣🤣🤣
Bruh ... repeats in a over 3hours long video ... yikes!
Handsome!!!!👍👍👍👍
Did anybody actually get past the first 50 minutes?
Me gusta como lo explico lo uniico como se quita la fresao broca me costó trabajo me gustaría saber como la puedo quitar la
Ca. 1,8 Stunden gute Tipps! Danach nur noch Wiederholungen! Was soll das?!?!?
Магазины по цена качество по мне лучшие от магпул.
well why u have to throw the nail into bonfire to make the hole on the bottom of bottle while you have a drill for it's cap
For if you don't have a drill. Plus, it makes a smoother hole.
И они предлагают смотреть это три часа???
lo de la pila y el papel es mentira. o tiene que estar muy, muy entera la pila. con lo cual no sirve
Elementary students how them are made 2# pencils.,!? Thank you for your interests
Your video is too long
Are you fucking kidding me? No one forced you to watch it Karen.
And it's not all woodworking either...
Then come back to it later
technically it is. If you was paying attention. The stuff they built was used later in the video
Ugh, the music! Stopped after 1 min... just saying
Some of these were just garbage.
Still shooting video in the mirror, I see. What's wrong with you ????
а зачем?!
9000000 IQ
You have good hacks in that video, but why do you repeat so much? It's not nessesary to make such a long video !
Al que no le guste... que no mire. Y vaya a odiar a otro lado.
Few good ideas and a whole lot of dumb ones
QUE ES ESO!! QUE TIO DE EMPLAME ES¡ UM HORROR!
U need 10 on a job whatbthen
L
ㅕㅜㅜ
Too many adverts
I really liked the video because there were some great tips, but after the halfway point it was all just repeats of the first half. That was disappointing.