Diy CNC Plasma Cutter (Jasic cut 45)
HTML-код
- Опубликовано: 18 окт 2024
- Info regarding my plasma cutter i use and will be using on my new channel in the coming months. I am not payed by any manufacturer with the machine i use as they are totally my choice.
Please check out my website on www.smallgarageworkshop.co.uk or follow me on instagram @smallgarageworkshop
#jasic
#jasic cut 45
#diy cnc plasma
#homemade cnc machine
Very interesting and best youtube video on this from Uk
another very informative video thank you
💪 Thank you
Brilliant video 😊
Many thanks . More on the way 💪
I am also looking into a plasma source for in the field as well for a plasma table. What is the max of plate thickness you think you can cut with it? In the spec sheet it's says 15mn if I am correct? Does this apply to an cnc solution as well? And do you have an link for the cnc add ons for the jasic? Nice stuff you're doing. The parweld xtt212 are really nice tig welders. I worked also with the older brother the xtt202.
Hi Dean
Yes 15mm Is the same with cnc however I wouldn't be cutting 15mm all day with it as the cut 60 then comes into play but that's 3 phase. The add ons they don't do now as at the time of purchase if you tell them you want it for cnc they fit it and send out. If you do go for the Jasic 45 then give me a shout and I will send you info on were to buy as they will beat anyone in uk. Yes the xtt212 is a right animal for the size 👍
@@smallgarageworkshop6119 that is my reason for the jasic 45 instead of the cut 60 so it is portable and usable in the field as well. Most of the cutting will be 5 or 8 mm and sometimes 10 to 15 mm. I am also curious if this machine can do plasma gouging? And I have an table but not yet an plasma source so that why I consider this machine
No worries . Well I have done gouging with mine as I have just placed the head at an angle but it's something I don't do but did it to see if it's possible. I think most modern cutters should gouge but i would contact jasic. Like I say I don't get paid by them and all the machines are paid for by me but are the only ones I constantly use without issues. I won't name names but I have paid silly money and not so silly money and the jasic is the only one left standing that I pass as a nice cut.
Well not had time to do these videos for a bit due to work but I'm back on them shortly with some smaller projects peeps can follow. Follow me on instagram for all the latest projects @smallgarageworkshop
Arsenal badge looks epic
Can you do some on sheetcam please and how you design them
I can see where the 120 euro extra is going for the cnc interface on it.
That's what they are charging me if I want the cnc interface as a special order.
Simple voltage divider, some wires and 2 plugs isn't to expensive and it doesnt look like it takes 3 hours to install.
It's more than that I think now as I think It was a tenner when I did mine . I'm hypertherm now as Jasic became difficult to deal with
Took me 7 mins ish to install
@@smallgarageworkshop6119 are you running that hypertherm on 380v?
I have seen single phase 230v in the specs but at like 30 amp which leads me to believe it's more towards US customers.
@@samuraidriver4x4 240v mate UK 16amp
@@smallgarageworkshop6119 good to know, going to save up some more and go that route then.
Using a cheap Chinese cutter now but the quality isnt great and its noisy (hf) but no pc issues yet.
Netherlands here 😉
where did you get the papers with the CNC modification instructions you show on 1:50 ? I bought a JASIC 45 and i would like to locate the contact points where i can get the raw voltage for my proma THC. Could you send me a linkt to those pdf's ? Thanks !
Hi
Follow me on insta and will send you them through there. They were done by me a few years ago 👍
@@smallgarageworkshop6119 hey mate, nice build. what motion controller are you using?
@@smallgarageworkshop6119 could i trouble you for those instructions too? i have a jasic 60 so might not be the same but might give me some idea of were to look, i tried to tap in where the torch and work clamp connect but thats giving issues with pilot arc voltages.
@@finlaybichan1275 no problem can you instagram please me as can't send them on here buddy. Jasic 60 should already be done i think depending age
@@smallgarageworkshop6119 yeah will do thanks man! yeah it does have a divider already, i actually want to see if i can bypass it as my thc has its on 40:1 divider