Important tips (model 90000): - Many different wrench sizes are necessary, make sure you have two complete sets ready and they should be slim. - Add the backboard's spring (I had only 1) already at the step shown at 4:20. Funny how they skipped this step (also in the manual) and showed only how it's already mounted at 11:41. The gap between the hook and the spring was too narrow to simply stretch and hang it on the tube. I had to unscrew it, which was tricky and especially that screw was very thight. - 6:12 make sure both sides of backboard brackets have the exact same distance from the top of the backboard to the screw, otherwise your backboard will be tilted to either the left or right (it's fixable afterwards, but quite uncomfortable to do). - If you're fit, it's possible to assemble the whole thing by yourself, just a bit hard to pull it up, as it won't stand by itself. Add a bit of water/sand into the base and the rest after.
Questionp:Ive set up my Basketball rim but when the basketball hits it it makes a high pitched rattle sound unlike other basketball hoops similar that make more of a thud sound.If theres a reason behind this would much appreciate helping me.
I've assembled it properly but my backboard isn't straight up and down, it leans back a degree or two and as a result the rim is 10'1" high. Anyone know why this would be the case? I can't see where it could be adjusted to make the backboard, and rim, level.
Can someone please help a non mechanically inclined person? I put the hope together but I cannot get my backboard to straighten out. It's bent down and I'm kinda at a lose how to make it straight. Loosened several bolts etc and nothing. Any help is appreciated.
Drill holes a little bit above the current holes, then put the support bars in there and straighten it out from the holes u have drilled. Edit.. Its a manufacturing defect
Important tips (model 90000):
- Many different wrench sizes are necessary, make sure you have two complete sets ready and they should be slim.
- Add the backboard's spring (I had only 1) already at the step shown at 4:20. Funny how they skipped this step (also in the manual) and showed only how it's already mounted at 11:41. The gap between the hook and the spring was too narrow to simply stretch and hang it on the tube. I had to unscrew it, which was tricky and especially that screw was very thight.
- 6:12 make sure both sides of backboard brackets have the exact same distance from the top of the backboard to the screw, otherwise your backboard will be tilted to either the left or right (it's fixable afterwards, but quite uncomfortable to do).
- If you're fit, it's possible to assemble the whole thing by yourself, just a bit hard to pull it up, as it won't stand by itself. Add a bit of water/sand into the base and the rest after.
what if i missed the spring? with no spring what are the consequences ?
I stopped watching after seeing the glove shoes 3:48
No wonder I couldn’t do it y’all had missing peaces
Joseph Saucedo yup same here
@@hiimryan2388 Same
Exactly
I've had nothing but problems trying to get it back up to 10ft
Do they have backboard replacement for this?????
can we dunk on that
Questionp:Ive set up my Basketball rim but when the basketball hits it it makes a high pitched rattle sound unlike other basketball hoops similar that make more of a thud sound.If theres a reason behind this would much appreciate helping me.
Harvey foyer do you if I can buy those springs at 5:49 by themselves?
Your aren’t showing the screws. What are we suppose to do? Guess which screws?
garbage company makes garbage directions, advice.
Where can you purchase the mounting bracket?
I’m stuck at the start, I can’t get the poll bracket tight lmao
what type of springs are used?
lost mine, not sure which ones i should get for a replacement
Question where can you get replacement 90491 basketball rim at?
Thanks but the bloody thing won't budge from 10ft😠😠😠
Ian Jones it’s a youth hoop. I don’t know if you had a birth defect that made 6’1” at birth but kids cant jump that high
Grumbles_the_illegal_gek I’m pretty sure he’s trying to say that it won’t go lower then 10ft
@@grumblesz ur an idiot hes saying it womt go lower than 10ft
I've assembled it properly but my backboard isn't straight up and down, it leans back a degree or two and as a result the rim is 10'1" high. Anyone know why this would be the case? I can't see where it could be adjusted to make the backboard, and rim, level.
I have the same issues, thought the pole and hoop assembly are all off by 2-3 degree. I am trying to figure out to jerry-rig this.
Why did this show up on my for you page
If you going to start a video start that mug from the beginning to the end that means open up the box so everything
Can someone please help a non mechanically inclined person? I put the hope together but I cannot get my backboard to straighten out. It's bent down and I'm kinda at a lose how to make it straight. Loosened several bolts etc and nothing. Any help is appreciated.
Same
Same
How did you guys figure it out ?
Pa cey did you ever fix it
Drill holes a little bit above the current holes, then put the support bars in there and straighten it out from the holes u have drilled.
Edit.. Its a manufacturing defect
Great job
What if my rim is bent and I need to install a new one. Does that require taking it apart again?
le miens ne monte pas à 3,05
Et les ressorts ???????!!!????!!??
Il les a mis
@@sothen7047 il les as mis oui, mais il à pas montrer comment !!!! C est le plus chiant à faire perso
@@sothen7047 dans la vidéo ils sont déjà posés comme par magie mdr..
A oui je vois ta raison dsl
@@sothen7047 j ai peté les plombs pour le mettre..en fait c est tout con avec une pince mode bourrin ça passe ;) faut pas réfléchir
I noticed my rim is tilted upwards towards the backboard, anyone else had this problem?
That's just a straight rim, it looks like that because maybe the backboard isn't straight
Levi Ashcroft buck hmm thanks for the reply i’ll check ir out in the morning and see what’s going on
The
Eow
if you havent bought ...DONT. Its garbage ...pure utah made garbage. Lousiest directions I ever saw in 50 years...did you hear? GARBAGE !!!!!
N