Fellow crafter please watch the video until the end. I explained a lot more on the later part of the video 😊 In this part 6:30 I mentioned that if you don't want to tear your mold when you demold your piece with eye screw on it, you can remove the screw after curing for at least 3-4 hours while it's still soft but firm and the hole will stay there until it's fully-cured ,then you can just put the eye screw back when it's already cured but you'll need UV Resin or shoe glue to secure it. No drilling needed too.
@@jamesbarlowjr.3762… towards the end of the video, it does show that a little resin leaked from the hole, but it was easily removed. Hope that helps? Much love from Brisbane, Australia. ♥️♥️🇦🇺
It is a brilliant technique. When i used to pour resin i used fear that the resin keychain hole in mould will get filled. But now i can pour my resin without any hassle. Thanks a lot for sharing.
I didn't too 😅 I had to try it first on one mold and pray that it would 😆 tho I mentioned on the later part of the video that if you don't want to tear your mold by demolding it with the eye screw on the letter, you can remove the pin when your resin project has been cured for at least 3-4 hours ,while the resin is still soft but firm already and the hole will stay there until it's fully cured. You don't need drill too but you'll need UV Resin or Shoe Glue to secure the eye screw when you put it.
@@EjoysArtSpace29 I usually do - always worth watching, and as a new RUclipsr myself I know how much the watch time matters even to successful channels like yours :)
I started doing this 3 months ago when I'm making my daughter's christening souvenirs. It huge help specially when making big batches. Thank you for sharing this Ejoy. I am new at your channel and when I see this video I hit the subscribe button quickly. You're so inspiring❤❤❤
Watched the whole video. Great!!!!!! Idea!!!! Love it better when y’all talk tho. Not being mean. Just that RUclipsr who loves when you all talk. Then there are ones who do talk who get comments they talk to much. Lol. No pleasing everyone. ❤️ love your work
Wow, I was getting frustrated as to why my pieces were cracking! It was because i was drilling them and adding the eyepins post curing. Your video is great and your resin pieces are wonderful. Thank you ❤
Woah!!! You just saved me so much trouble, time and money with this hack!! Im making a custom keychain for my son but the mold doesnt have a peg to provide a hole, so i was just going to drill a pilot hole into it. Thank you soooooo much!! Your work is beautiful!!
Omg, muy buena técnica, no se porque se me quiebran mis piezas a los días de ponerle el eye pin🤔 empezaré a usar esa nueva técnica estéticamente se ve muy bien 😍😉 gracias 🤩 😅
I was facing a issues because my eye keeps coming out, idk why, maybe because the resin was dried and the Keychain was not holding it. Thank you for telling.... I'm starting my mini business with my own pocket money of resin... I need this trick definitely
Great idea! Very clever. I'm just curious how long the mold will last, doing that. Did you use some kind of paste in a recent video? Would a dab of that on the outside before you pulled the screw through help any? I think we can all agree that ejoy is the Queen of Letters.
Thank you Miley 😊🎀 for reference, I used some of the molds for at least 4x and they're still completely fine and usable up to now and to think that the letter mold set (like I used in the video) that's been sold to the market is thinner than what I used from 2 years ago.
Fellow crafter please watch the video until the end. I explained a lot more on the later part of the video 😊
In this part 6:30 I mentioned that if you don't want to tear your mold when you demold your piece with eye screw on it, you can remove the screw after curing for at least 3-4 hours while it's still soft but firm and the hole will stay there until it's fully-cured ,then you can just put the eye screw back when it's already cured but you'll need UV Resin or shoe glue to secure it. No drilling needed too.
Thank you for sharing 🤗
Shaaandaae❤🎉
Shandaar 🎉❤❤❤
I started doing this last year and I wondered why no one showed this trick in their videos, I am glad you did. Its such an easy little trick.
It's very useful right? 😊🎀 Thanks for watching
What if you want to make just a letter does it not leak? Thanks.
@@jamesbarlowjr.3762… towards the end of the video, it does show that a little resin leaked from the hole, but it was easily removed. Hope that helps?
Much love from Brisbane, Australia. ♥️♥️🇦🇺
My keychains used to crack a lot and it made me frustrated since i wanted to sell them. Thank you for this tip.
Happy to share 😊 🎀
@@EjoysArtSpace29plz guid me my key chains becoms sticky as I use 2:1 rasio and mix it well properly 5 minutes what will the reason😢
3:1 use hota h mould me@@DailyDose580
It is a brilliant technique.
When i used to pour resin i used fear that the resin keychain hole in mould will get filled. But now i can pour my resin without any hassle.
Thanks a lot for sharing.
Happy to share. Just ne careful when demolding
Your videos teach and relax ,,Congratulations for sharing your resin secrets 👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽
Thank you 😊 🎀 Happy to share
OMG! have? you have no idea how much easier it will make things for me! Thank you for sharing
Happy to share 😊 🎀 if it ever starts to leak after several use, you can just tape it
@@EjoysArtSpace29 good to know! Thank You
You are such genius. Thank you for sharing with all your fellow crafters. ❤
Thank you 😊 🎀
Great way of thinking and awesome time saving idea....👍🏻
Thank you 😊 🎀
It doesn't matter what I think...... This is AWESOME!!!!!!! Thank you so much for sharing!
Thank you 🎀 😊
Thank you! I have been struggling with the hand drill!!
Happy to share 😊 🎀
woah the amount of keychains and this is brilliant!!
Thank you 😊 🎀
Wow can’t wait to try it
Happy crafting ☺️🎀
These are beautiful
Thank you 😊 🎀
wow I really never imagined the eye would pull through the mold like that. Amazing
I didn't too 😅 I had to try it first on one mold and pray that it would 😆 tho I mentioned on the later part of the video that if you don't want to tear your mold by demolding it with the eye screw on the letter, you can remove the pin when your resin project has been cured for at least 3-4 hours ,while the resin is still soft but firm already and the hole will stay there until it's fully cured. You don't need drill too but you'll need UV Resin or Shoe Glue to secure the eye screw when you put it.
@@EjoysArtSpace29 Yes I saw that - both sound like great options
@@miniscenesgb thank you for watching the whole video before commenting 😊 really appreciated 🎀
@@EjoysArtSpace29 I usually do - always worth watching, and as a new RUclipsr myself I know how much the watch time matters even to successful channels like yours :)
Thank you so much ☺️🎀💝
I started doing this 3 months ago when I'm making my daughter's christening souvenirs. It huge help specially when making big batches. Thank you for sharing this Ejoy. I am new at your channel and when I see this video I hit the subscribe button quickly. You're so inspiring❤❤❤
That's awesome 😊🎀 thank you for your support 💝
Greetings from Mumbai, India. Love this idea of using eye pins. Will do this henceforth when making alphabet keychains. Thank you for sharing.
Hello. Thank you 😊 happy crafting 🎀
She is really a great person ☺️
Thank you 😊 🎀
Hi. This is awesome! I was going to buy the molds with the holes already so I would not need a drill. Thank you so much.
Happy to share
Awesome. Thanks. You do beautiful work.
Thank you 😊 🎀
Wow Ejoy you’re the best I love it
Thank you 🎀 😊
Watched the whole video. Great!!!!!! Idea!!!! Love it better when y’all talk tho. Not being mean. Just that RUclipsr who loves when you all talk. Then there are ones who do talk who get comments they talk to much. Lol. No pleasing everyone. ❤️ love your work
Thank you ☺️🎀
Then there's some who show us there Temu hauls and take over two hours!!! OY!
Thank you🙌🏽🙌🏽🙌🏽
Absolutely brilliant idea. I hate using the drill.. thank you
Happy to share 😊🎀
Thank you for sharing love the idea of putting the screw before the resin ❤
Welcome 🎀 😊
For me drilling is very difficult but now it's very easy for me. Very useful video.
Great Idea, I love the way it looks. thank you
Thank you 😊🎀
Wow.. 😲 I love this technique I"ll try this ..thank u ❤️🇱🇰
Thank you 🎀 😊 please be very careful when demolding 😊
Great tip, thank you for sharing it😀
Happy to share 😊 🎀
ABSOLUTELY love this 👏🏽👏🏽👏🏽Great video, beautiful 💯thanks
Thank you 🎀 😊
Wow, I was getting frustrated as to why my pieces were cracking! It was because i was drilling them and adding the eyepins post curing. Your video is great and your resin pieces are wonderful. Thank you ❤
This will help but be careful with your mold.
Thank you. I really love your work. Many Blessings
Thank you 😊 🎀
Woah!!! You just saved me so much trouble, time and money with this hack!! Im making a custom keychain for my son but the mold doesnt have a peg to provide a hole, so i was just going to drill a pilot hole into it. Thank you soooooo much!! Your work is beautiful!!
Happy to share 😊🎀
Thnkiuuu so much sharing this technique😍
Happy to share 😊 🎀
Excellent idea. Thank you.
Thank you 😊 🎀
I love this new technique!🎉
Thank you 🎀 😊 I love it too.
É natural que com a sua experiência vá evoluir,até mais ideias fantasticas vão lhe surgir,enquanto eu, ainda estou a pensar na mistura da resina🤭
Yeah I understand what you mean. I've been doing resin for almost 3 years now. But when I was just starting, I made a lot of mistakes 😅
Wow its really helpful
Thank you 🎀 😊
Wow! Game changer, I may actually like making those lol
Thank you 😊 🎀
I love it and seems ro be more secure
Thanks 🎀
Thank you,I'll try this technique
Happy to share
Great idea!
Thank you 🎀 😊
Thanks dear i will try this technique today
Good luck 😊🎀
Very Cool! I Love It! 😊
Thank you 😊 🎀
@@EjoysArtSpace29 Your Welcome Love! 😊
Nice idea❤❤❤
Thanks po 😊🎀
Great hack. Well done, you x
Thank you 🎀 😊
Great idea
Thank you 🎀 😊
What!!! 🤯 So smart!
Thank you 😊🎀
your videos are always very useful for beginners, like me .much love from Pakistan ❤
Thank you 😊 🎀
I will be selling my own keychains soon and your channel has been awesomely motivating to start ❤❤❤
I'm happy for you. Wish you good sales 😊🎀
Thank u dear for money saving idea. I have no idea to buy this drill. I thought what's the best option to do. Good idea 😊
Thank you 🎀 😊 but I used it merely for finishing bulk orders to save time. Drill should be handy if you're just making few pieces
It's very nice technique thank you for sharing 😊
Thank you 🎀 😊
omg!! such genius u r!!!
Thank you 🎀 😊
Wow..amazing....good idea
Thank you 🎀 😊
I love your videos! This is a great technique! Thank’s for sharing ! ❤
Thank you 🎀 😊
I love this and will be giving it a go tomorrow - thank you
Thank you 🎀 😊 happy crafting
Amazing idea
Thank you 🎀 😊
Excellent, am going to try this. Thank you
Thank you 😊🎀 Happy crafting!
Excellent idea
Thank you 😊😅
Wow! Thanks for sharing. I've been using hama beads to create the hole but that's not always the solution.
Happ to share 😊🎀
HI. I read all the comments here. does it not bother that the cut hole piece remains there in the mould ? I fear damaging my moulds.
I'm still using now up to now
That's genius 👏🏾 I don't wor with resin but I love this technique... ❤😊
Thank you 🎀 😊
Thank you so much for sharing! Can’t believe I’ve never been on your channel before 🫶🏽
Happy to share 😊🎀
Oh I will definitely be trying this technique… thanks for sharing hun
Happy to share 😊 🎀 Happy crafting!
You did great! Thanks for sharing!!!❤
Thank you 😊 🎀
Wow thanks for the tip. I absolutely had no idea how I was going to screw in everyone and I haven't tried this but I think it should save time.
It would. Just be careful with your mold
This technique is worth a try. I have broken several screws in my pieces.
Yes it is 😊 just be careful
Omg game changer!!!
It is
Love these beach themed letters ❤ Love the idea of putting in the screw pin before pouring, definitely looks much cleaner 👍😊
Thank you 😊 🎀
This is genius!!!!!!
Thank you 😊
Omg, muy buena técnica, no se porque se me quiebran mis piezas a los días de ponerle el eye pin🤔 empezaré a usar esa nueva técnica estéticamente se ve muy bien 😍😉 gracias 🤩 😅
Thank you 🎀 😊
Love this technique!🎉
Thank you 🎀 😊
Fantastic idea..thanks❤
Thank you 🎀 😊
Thanks for sharing this new idea and as well the tips. It was really interesting 😊 thank you!
Thank you 🎀 😊
Omg!!! 😮 I SOOO wish I’d have come across this video a week or two ago. BEFORE I poured 144 letters that I have yet to finish putting the eyes on. 😂😂😂
😮
Wow that's a lot ,congratulations 😊🎀
@@EjoysArtSpace29 thank you. My sister has a lil ole country boutique she just opened in our town that I am putting them.
@@EjoysArtSpace29 I also wanted to ask you, what iv resin do you use?
@@jodir9984 I use JDiction
Wow! I've subscribed and am so excited to try this! Thank you! ❤
Thank you 😊 🎀 be careful with the mold
Aapki video bhot achi he❤
Aapne meri problem door kardi drill use ki❤
Thank you ❤
Thank you 😊
Mam ek letter kitni baar use kar sakte h
Buena idea 😊
Thank you 🎀 😊
Amazing creation. I like your amazing ideas. Plz tell me what is the painting brush you use the beautiful finish. And how u clean it
Plz reply
Thank you 😊 🎀 it's just a normal brush. I'm just using it to brush off the resin powder created by drilling
Thanks for new idea
Happy to share 😊 🎀
This is awesome. Thank you
Happy to share 😊🎀
Super Idee 👍 😍 💡
Thank you 😊
This is awesome. Thank you 🙏
Thank you 🎀 😊
Wow! Great idea! Very clever 😍😍
Thank you 🎀 😊
Beautiful ❤❤❤Thank you💐💐💐💐💕💕💕💕💕
Thank you 😊
Genius!!!
Thank you 😊 🎀
This is amazing! I cannot wait to try this! ❤
Thank you 😊 🎀
Weldon very informative vdo 👌👏.😇
Thank you 🎀 😊
Thank you so much….new Subbi… btw I love watching your videos nd listening to the music lol
Thank you 😊
Brilliant ❤ Thank u so much
Thank you 😊
What a smart idea. Saves time too.
Saves time is what I definitely needed since I have very limited time to finish orders especially bulk ones. Thank you for watching 🎀 😊
Love it!!!!
Thank you 🎀 😊
Tq for the share😊 will try it❤
Thank you 😊 🎀
thank you great idea
Happy to share 😊
i will love to try this technique cus drilling some times do make the work look somehow
I was facing a issues because my eye keeps coming out, idk why, maybe because the resin was dried and the Keychain was not holding it. Thank you for telling.... I'm starting my mini business with my own pocket money of resin... I need this trick definitely
Put a small amount of resin on the eye before putting it
Great idea! Very clever. I'm just curious how long the mold will last, doing that. Did you use some kind of paste in a recent video? Would a dab of that on the outside before you pulled the screw through help any? I think we can all agree that ejoy is the Queen of Letters.
Thank you Miley 😊🎀 for reference, I used some of the molds for at least 4x and they're still completely fine and usable up to now and to think that the letter mold set (like I used in the video) that's been sold to the market is thinner than what I used from 2 years ago.
And yes! That liquid release wax would surely help. Thanks Miley 🎀
Also please watch this part 6:30 to save your mold 😊
Awesome
Thank you 😊🎀
Maybe, you can put elmer’s glue outside the silicone, after you insert the screw? To avoid overspilled resin? I don’t know if that would work 😅
Genius but how long do think that it would hold up from the resin leaking out your videos are wonderful thanks for sharing 😘
Thank you 🎀 😊 you can always tape it if it starts to leak
Great idea; thanks for sharing. Can the mold be reused?
Thank you 😊 yes
Great technique, does this put wear and tear on the mold to be replaced sooner?
Thank you 🎀 😊 you can tape it if it tears apart