#02 Creo Live Simulation- Thermal Simulation Study

#MdDesignAcademy #creoparametric #Creo #design #simulation #creosimulation #livesimulation
In this video tutorial we will learn about Thermal Simulation study with electrical circuit and application while designing the circuit.
To download the parts used in Simulation follow the link: drive.google.c...
Overview Of Creo Simulation Live:
Creo Simulation Live is a rapid prototyping simulation tool. Engineers and designers who are not full-time analysts can use Creo Simulation Live to try out 3D simulations on models, early in the design. You can interactively change materials, loads, constraints, or results and view almost instantaneous simulation results. Then visualize the results of an analysis without a detailed understanding of the design.
As an analyst, you can use the results from a concept design from live simulation, and reduce the number of high-fidelity simulations that are normally required later in the design.
Running Thermal Simulation Studies-Creo Simulation Live
Run a thermal simulation to calculate the thermal response to heat loads, depending on the prescribed temperatures, applied convection conditions or both. You can run the following types of thermal analyses:
•Steady-state Thermal Study-Assumes a steady-state for all thermal loads and boundary conditions. This type of analysis does not evaluate changes over time.
•Transient Thermal Study-Calculates temperatures and heat flux in your model over a time range.
To run a thermal analysis you must define the following inputs:
•A material for the model.
•One or more of the following thermal boundary conditions:
◦A convection condition for the surfaces in contact with the air around the solid body.
◦A prescribed temperature boundary condition for a surface.
◦An initial temperature of components in the case of transient thermal studies.
•One or more of the following loads:
◦A heat flow load.
◦A heat flux load.
Follow the link to watch complete Creo Parametric tutorial's on:
1. Creo Sketch- • Creo Sketch Module
2. Creo Part Modelling- • Creo Part Module
3. Creo Assembly Design- • Creo Assembly Design
4. Creo Detailed Drawing- • Creo Drawing
5. Creo Sheetmetal- • Creo Sheet Metals
6. Creo Layout- • Creo Layout
7. Creo Simulation- • Creo Simulation
8. Creo Practice Sessions- • Creo Practices Session
9. Creo Complete Session- • Creo Parametric Tutori...
If you have any questions or comments, please feel free to post or you can send me an e-mail to: [e-mail].
Friends! Do not forget, if you like our videos, please Subscribe, Like, Favorite and Share it to your friends.
creo simulation assembly I creo simulation live I creo simulation live tutorial I creo simulation training I creo simulation for beginners I creo simulation live plus I creo simulation tutorial I creo simulation course I creo simulation tutorial for beginners

[@ShahbazAli-nd9pw]

Best video ever

[@MDDesignAcademy]

Thanks ! Keep watching and learning 😌

[@animalvideos816]

Hi.sir. creo jigs and fixture design per bhi course create kijia

[@MDDesignAcademy]

Will make soon on this.

[@AngSu]

Thanks for making the video. Does Creo has the capability to show thermal deformation ?

[@MDDesignAcademy]

Yes there is option but not in live simulation tab.

[@xxhimanshubakshixx]

why convection coefficient is 10 ?? and why is it by default?? (2:20)

[@MDDesignAcademy]

For air as a medium it is treated as 10.

[@chat8157]

I have a job for you to do with my heat calculations. Do you accept? How can I contact you?

[@MDDesignAcademy]

It's ok. I am already engaged in another work.