ឆ្នៃកង់យោងរឺស៊័របង្វិល
HTML-код
- Опубликовано: 29 май 2024
- ឆ្នៃកង់យោងរឺស៊័របង្វិល
វីឌីអូរបស់ខ្ញុំចង់បង្ហាញអំពី ការសាងសង់ កាឆ្នៃប្រឌិត និងតំឡើង សំភារះផ្សេងៗដែលពាក់ព័ន្ធនិងជាងដែកដើម្បីជាចំដឹង
នឹងបទពិសោធន៏ខ្លះៗដើម្បីចែករំលែកដល់អ្នកទស្សនាសូមចុចលិង • របៀបសាងសង់សំយាបផ្ទះ ,... ដើម្បើមើលវីឌីអូ @LMH-welding.22
សូមពុកម៉ែបងប្អូនជួយចុច SUBSCRIBE និងរូបកន្ដឹងដល់ឆានែលរបស់ខ្ញុំបាទ
ដើម្បីទទួលបានវីឌីអូថ្មីៗបន្តទៀត @LMH-welding.22 - Хобби
É incrível como as pessoas perdem tempo e dinheiro, com uma coisa que não tem a mínima chance de funcionar como esta.
The stretching of the springs takes more energy than the contracting springs can supply, there is also friction from the bearings and if you add a generator to produce electricity it will slow down and stop even quicker with the extra friction and drag, adding more springs or a heavier flywheel just makes it worse. If you watch between 8:20 and 8:35 you will see what normally happens, it spins a few times and stops. "Free Energy" or "Perpetual Motion" was found to be impossible in the late 1790's.
Basic Physics, you can't get more energy out of a machine than you put into it.
"Energy cannot be created or destroyed, it can only change form."
Hi
Es imposible ya que los resortes están enfrentados y por esto se anulan entre si
You forgot the flywheel power
@@freesoul9324, the flywheel will slow to a stop due to friction on the bearings and the heavier the flywheel the more friction, in actual fact, the flywheel will actually spin longer WITHOUT the springs which are introducing a resistance to the wheels motion.
Basic laws of Physics; Law of Conservation of Energy, "Energy cannot be created or destroyed, it can only change form".
So freesoul9324, this crap simply will not work.
Ernesto Rada, nice pick up but not quite right, they don't just cancel each other out, there is a loss of energy in each expansion of the springs, the contracting springs don't provide the energy needed to stretch the next one so you get a diminishing rate of return and as such the machine will stop. In fact, the flywheel will actually spin longer WITHOUT the springs which are introducing an extra resistance to the wheels motion.
Não dá seguimento só roda no impulso depois para. Quem dera se funcionasse seria a melhor coisa inventada.
Creo que si es posible en el minuto 8:46 están regulando los resortes, corrigiendo la tensión, y en el minuto 8:54 está lista y la empujan lentamente y gira lentamente sin detenerse, convencidos de que no se detendrá, la empujan con más fuerza.....
Quizás si continúan regulando un poquito más, llegarían al punto de que, con leve empujón, tome velocidad la rueda.
Pode ajustar o quanto quiser ... isso não funciona. A roda sempre achará um ponto de equilibrio. Its is FAKE.
I like how they are welding the nuts to the bearing and it is smoking (burning the lubricant) not to mention that the heat will put the bearing out of round introducing even more friction within the bearing and they expect us to believe that this machine actually works, what a fucking joke.
វាមិនអាចទៅរួចទេ
it doesn't work at all then
No...ปลอมมาก...
Não aprovo fiz um com a maior perfeição e não funciono e ilusão. Mentira .fake
Correct, it does not work because of the Basic laws of Physics; Law of Conservation of Energy, "Energy cannot be created or destroyed, it can only change form". Cheers.
Só perdeu tempo e dinheiro. Só de olhar da pra ver que não funcionará.
orang indo tidak mampu buat seperti ini kecuali orang orang india yg jenius
Watch between 8:00 and 8:30 and you will see EXACTLY what this machine does regardless of how much they tension the springs.
Yalan munkunatiyok