I've added events to my workflow thanks to you! Currently been using it to switch between polyphonic and monophonic based on the pattern without needing a duplicate of the same patch.
event automation is so much cleaner when you are doing those things like opening up multiple parameters filter/detune etc on a synth or riser. I used to think it was too clumsy to draw a good result, but with a bit of experimentation and interpolation is works well enough. the ability to record in automation is so much better and humanizing for certain things too. now i'm really looking forward to the ability to turn automation clips into event automation
@@flstudiotricks6903 i mean for example drawing pitch in event editor, if i touch anything with the pencil tool everything ahead changes and when i try to click on 0 to get back it never gets back exactly at the 0 line
Another great tutorial sir! Question, I did not see you mention. Deleting sections of Events in the Piano roll with the select tool also selects the midi note above it and deletes it. Even after I deselect it with ctrl click on midi note itself leaving only the event selection in question. Also same goes for selecting events and copying and pasting or duplicating. Would have loved to make my edits in the paino roll event editor where I can visually maniuplate both the midi notes and the events. Also, high lighting a midi note automatically high lights the events if you duplicate the midi notes the events doesn't get duplicated even if they are highlighted. So I guess ill stick with event editor window itself. Also a trick is you can use event editor for audio clips on the playlist by adding an empty pattern clip. Also to recall any events fast is to have the multi link controll knob icon on the tool bar and simply right click it.
Many people have been frustrated with this and asking for a workflow update for years. I eventually moved to Cubase for composing. Years later they still haven't touched it.
@@enterthevortex5883 It actually does, not as good as FL's which I still use for sound design and remixing. But anything dealing with midi and orchestration with templates has been amazing in Cubase. I wish I didn't have to use two DAWs, yet that's the reality.
Sir your chennal is awesome ❤️. I love your content its super duper helpfull...🔥 Especially that patcher video. Its bcoz of that video a made my own vocal treatment by adding a short reverb + hall reverb + slap delay + wider with 2 parametric equaliser and some panning options. And that patcher made my workflow so damn easy👍 and my vocal so amazing sounding❤️ Thank you so much for that.... I have a suggestion. I can understand your channel's name is personal to you. But it would be much beneficial for u if u change you channel's name into something easier and memorable. something like "MORE Fl studio tips" or anything like that... Anyway its upto you. But please consider my suggestion. Thank you so so much❤️👍🙏 you are awesome.
I am curious if you can do a video on why my master may sound distorted. Some people are telling me its because I am pitching my vocals. Any help with this I would greatly appreciate it.
The problem is there could be thousands of reasons why the master can distort... One of the most comon ones is an unbalanced Mix... Can you send me a render to my e-mail??
How to Delete a Automation if i recorded in to a MIdi Clip and recorded wiith multi knob that i moved, if i try to cut it cuts all midi... Anyone Help?
I have one really big issue. Can you explain what exactly is Plugin Delay Compensation PDC and how to aviod it in fl? I really couldn't find ANY useful video about this
Late to the party here, but question: is there a way to quantize the vertical aspects of the automation? I haven't found anything in the manual. I ask this because the main thing I use event editing for is for channel pitch on a non-FL instrument so I can get pitch slides, but it is unreasonably difficult to use this method to get to an exact note, and more importantly, to reset the value to the default at the end of the slide so it doesn't affect future notes. The sample and hold method always leaves the automation slightly off at the end unless I zoom way in and try to draw it back to the exact middle by hand, which is slow and tedious. What's more, if you try to copy/paste the default value of 0 over the ending value, you end up with the last value before the pasted section, I think because 0 in this case is not a value, it literally does not exist for performance optimization purposes. Any tips? I want the event editor to be useful but it's a pain to use as of now.
Fuck the Event Editor it need to be reworked. It is such a pain in the ass to use. They should integrate it in to the Piano Roll directly but allow for automation clip styled editing which would allow for greater precision. I don't know why they won't address this... A lot of people myself included think it's long overdo. Look at Logic. They have Automation directly in their piano roll.
@@flstudiotricks6903 Ok I got it, so I was trying to make this godzilla power up effect, so rotating the fine knob from 25% to 100% with the coarse set to 1 pretty much does it (only on one osc), but the edit event only goes up to 1 on that. I added the edit event to the speed slider on the third page where the lfo is (I don't know the exact name I'm new to fl studios) basically your trick worked, thank you :)
That´s for automation clips and perhaps you might find interesting something I will present in one of upcoming beta videos which will help a lot in this regard...
There is that alternative events editor within the piano roll. I tried that one and noticed that for some reason the selected pattern expands itself with "autotomation values" even if there are no midi notes, the pattern will not loop anymore. That is weird. Any idea why that happens and how to avoid it? I tried to add automation via the events editor as you did. It also adds infinite modulation values but the pattern still loops when midi notes end.
Yes event automation belongs to the pattern and will extend the pattern so that it will not loop just with the midi notes anymore but with it´s actual length... To prevent this you can record the automation data into their own patterns independent from the midi notes or you make them the same length by either adding more midi notes or by deleting the longer automation...
I know its quite random but i have two question is there a way in fl studio to make every plugin that gets open. Is opened in the center of the screen. So that one don't need to replace it in centre of the screen everytime. 2. How can I byepass all the plugins of every track by one click?
I have no idea for your first question... For bypassing FX on tracks there is a little switch in every mixer channel to bypass all FX on this mixer track but this you would have to do manually for every mixer channel...
@@flstudiotricks6903 yes. But i was looking for just one single click and all plugins in all the tracks should turned off.. anyway. Its ok... Image line should introduce this feature also... My first question was.. whenever i add a plugin to a mixer track it opens in any random place on screen.. how to make it gets open always in center of screen. I hope this time i have put my question clearly.
@@GUPRPEET-Singh I don´t think there is any way to tell the GUI to open centered... I have often seen complains about this but I think there was never any solution...
I like your videos but every time I watch them the audio keeps cutting out in my home theatre whenever you start speaking again. I think you must cut up your audio segments in a strange in pcm format . Makes them unwatchable
I am sorry to hear this, but I am doing nothing special here... I edit my vocals and export them as a normal wav file out of FL Studio, import them into the Video editor and export the mp4 which I upload to YT...
I use to think this but it's a game changer combined with midi faders or pots; just took me a second to get used to how annoying the tools seem to behave but if you just stay on mostly the draw and delete tools it's not so bad when you understand how the event editor behaves
I've added events to my workflow thanks to you! Currently been using it to switch between polyphonic and monophonic based on the pattern without needing a duplicate of the same patch.
Grats on 2K
Thx 🙂...was hard work!
i can remember using it when automations wasnt a thing in fl yet
Good ól times 🙂
You're straight to the point nice
best fl tutorials right here
event automation is so much cleaner when you are doing those things like opening up multiple parameters filter/detune etc on a synth or riser. I used to think it was too clumsy to draw a good result, but with a bit of experimentation and interpolation is works well enough. the ability to record in automation is so much better and humanizing for certain things too. now i'm really looking forward to the ability to turn automation clips into event automation
Keep it up sir! I can't express how much I appreciate the more advanced tutorials🙏🙏
My life is simple. I see a notification from your videos posted 58 seconds ago, I click on it🤷🏾♂️
I was looking on how to duplicate an event. Thank you so much Geez!!!!!!!!!!!!!!!!!!!!
Saved my life 😅 with this great advanced tutorial. Thank you.
i don't use it mostly cos because not being able to get back to 0 gives me anxiety attacks , but thank you for the starting from the right tips
Why shouldn´t you be able to get back to 0???
If I automate i.e. volume I can go down to -inf...
@@flstudiotricks6903 i mean for example drawing pitch in event editor, if i touch anything with the pencil tool everything ahead changes and when i try to click on 0 to get back it never gets back exactly at the 0 line
@@maxterwel Sorry, I cannot confirm this...
If I drag something back to the middle line it´s at zero again...
very informative
This is a very professional tutorial, in depth. Love it! I just subscribbed. Thank you so much! Your a pro!
Thank you and we’ll done. Hoping FLS will take care of that ‘bug’ you discovered with the disappearing pull down menu
thank you for this one
Thanks!
Another great tutorial sir! Question, I did not see you mention. Deleting sections of Events in the Piano roll with the select tool also selects the midi note above it and deletes it. Even after I deselect it with ctrl click on midi note itself leaving only the event selection in question. Also same goes for selecting events and copying and pasting or duplicating. Would have loved to make my edits in the paino roll event editor where I can visually maniuplate both the midi notes and the events. Also, high lighting a midi note automatically high lights the events if you duplicate the midi notes the events doesn't get duplicated even if they are highlighted. So I guess ill stick with event editor window itself. Also a trick is you can use event editor for audio clips on the playlist by adding an empty pattern clip. Also to recall any events fast is to have the multi link controll knob icon on the tool bar and simply right click it.
As I said in the video... it´s sometimes a bit cumbersome and you have to accept it as it is... 🙂
Many people have been frustrated with this and asking for a workflow update for years. I eventually moved to Cubase for composing. Years later they still haven't touched it.
@@prevolition does cubase have a good sampler? With plenty time stretch algorithms? Asking for a friend.
@@enterthevortex5883 It actually does, not as good as FL's which I still use for sound design and remixing. But anything dealing with midi and orchestration with templates has been amazing in Cubase. I wish I didn't have to use two DAWs, yet that's the reality.
@@prevolition Most people use automation clips anyway ...
I remember when FL actually got automation clips (was it 7?) and the BEFORE TIMES when all we had were "edit events" envelopes lol
again, thank you
esto es otro level, mui bueno.
Sir your chennal is awesome ❤️. I love your content its super duper helpfull...🔥 Especially that patcher video. Its bcoz of that video a made my own vocal treatment by adding a short reverb + hall reverb + slap delay + wider with 2 parametric equaliser and some panning options. And that patcher made my workflow so damn easy👍 and my vocal so amazing sounding❤️ Thank you so much for that....
I have a suggestion. I can understand your channel's name is personal to you. But it would be much beneficial for u if u change you channel's name into something easier and memorable. something like "MORE Fl studio tips" or anything like that...
Anyway its upto you. But please consider my suggestion.
Thank you so so much❤️👍🙏 you are awesome.
how do I open the editor for knobs that cant be right clicked or even create one
I am curious if you can do a video on why my master may sound distorted. Some people are telling me its because I am pitching my vocals. Any help with this I would greatly appreciate it.
The problem is there could be thousands of reasons why the master can distort...
One of the most comon ones is an unbalanced Mix...
Can you send me a render to my e-mail??
How to Delete a Automation if i recorded in to a MIdi Clip and recorded wiith multi knob that i moved, if i try to cut it cuts all midi... Anyone Help?
The trick is not to select anything but use the delete tool... watch this: ruclips.net/video/bZmNsneiJtk/видео.html
@@flstudiotricks6903 Thank You. You are the Best! Best Regards.
@@djrafaelgrey You´re welcome!
I have one really big issue. Can you explain what exactly is Plugin Delay Compensation PDC and how to aviod it in fl? I really couldn't find ANY useful video about this
Late to the party here, but question: is there a way to quantize the vertical aspects of the automation? I haven't found anything in the manual. I ask this because the main thing I use event editing for is for channel pitch on a non-FL instrument so I can get pitch slides, but it is unreasonably difficult to use this method to get to an exact note, and more importantly, to reset the value to the default at the end of the slide so it doesn't affect future notes. The sample and hold method always leaves the automation slightly off at the end unless I zoom way in and try to draw it back to the exact middle by hand, which is slow and tedious. What's more, if you try to copy/paste the default value of 0 over the ending value, you end up with the last value before the pasted section, I think because 0 in this case is not a value, it literally does not exist for performance optimization purposes. Any tips? I want the event editor to be useful but it's a pain to use as of now.
Fuck the Event Editor it need to be reworked. It is such a pain in the ass to use. They should integrate it in to the Piano Roll directly but allow for automation clip styled editing which would allow for greater precision.
I don't know why they won't address this... A lot of people myself included think it's long overdo. Look at Logic. They have Automation directly in their piano roll.
@@alltube264 Surely it'll get addressed at some point, right? ...right???
I'm trying to add this to 3x osc Fine knob but it only enters 0 or 1
I don´t understand...
What are you doing exactly??
@@flstudiotricks6903 Ok I got it, so I was trying to make this godzilla power up effect, so rotating the fine knob from 25% to 100% with the coarse set to 1 pretty much does it (only on one osc), but the edit event only goes up to 1 on that. I added the edit event to the speed slider on the third page where the lfo is (I don't know the exact name I'm new to fl studios) basically your trick worked, thank you :)
I still hope and hope that they will finally remove this not convenient option for drawing automation and add curves as in all modern programs_!!
That´s for automation clips and perhaps you might find interesting something I will present in one of upcoming beta videos which will help a lot in this regard...
Ok, I'm looking forward to it_!!
There is that alternative events editor within the piano roll. I tried that one and noticed that for some reason the selected pattern expands itself with "autotomation values" even if there are no midi notes, the pattern will not loop anymore. That is weird. Any idea why that happens and how to avoid it?
I tried to add automation via the events editor as you did. It also adds infinite modulation values but the pattern still loops when midi notes end.
Yes event automation belongs to the pattern and will extend the pattern so that it will not loop just with the midi notes anymore but with it´s actual length...
To prevent this you can record the automation data into their own patterns independent from the midi notes or you make them the same length by either adding more midi notes or by deleting the longer automation...
@@flstudiotricks6903 Dankeschön:D
I know its quite random but i have two question is there a way in fl studio to make every plugin that gets open. Is opened in the center of the screen. So that one don't need to replace it in centre of the screen everytime.
2. How can I byepass all the plugins of every track by one click?
I have no idea for your first question...
For bypassing FX on tracks there is a little switch in every mixer channel to bypass all FX on this mixer track but this you would have to do manually for every mixer channel...
@@flstudiotricks6903 yes. But i was looking for just one single click and all plugins in all the tracks should turned off.. anyway. Its ok... Image line should introduce this feature also...
My first question was.. whenever i add a plugin to a mixer track it opens in any random place on screen.. how to make it gets open always in center of screen. I hope this time i have put my question clearly.
@@GUPRPEET-Singh I don´t think there is any way to tell the GUI to open centered...
I have often seen complains about this but I think there was never any solution...
@@flstudiotricks6903 yes.. i can understand. Thanks anyway...👍 I hope they'll do something about it.
I like your videos but every time I watch them the audio keeps cutting out in my home theatre whenever you start speaking again. I think you must cut up your audio segments in a strange in pcm format . Makes them unwatchable
I am sorry to hear this, but I am doing nothing special here...
I edit my vocals and export them as a normal wav file out of FL Studio, import them into the Video editor and export the mp4 which I upload to YT...
Where are you from? Your accent sounds german
Yes.. i think he is German.
I reckon hes Austrian. "Get to the chopper" ?
@@kennyfenny4754 🙂
I am as german as one can get... 🙂...
....
sadly as I cannot get rid of this silly accent... 🙂
@@flstudiotricks6903 no .. i like ur accent. Its suits you..its ur style.👍
Event system in fl is the worst aspect of fl
I use to think this but it's a game changer combined with midi faders or pots; just took me a second to get used to how annoying the tools seem to behave but if you just stay on mostly the draw and delete tools it's not so bad when you understand how the event editor behaves