Customized Epoxy Resin keychain.

Customized Epoxy Resin keychain.#resinart #beginners #amazingthing
Creating a customized white and black epoxy resin keychain with golden foil accents can be a fun and creative DIY project. Here's a step-by-step procedure to help you make one:
Materials You'll Need:
Epoxy resin kit (including resin and hardener)
Silicone mold for keychains
White and black epoxy pigments or dyes
Gold foil flakes or sheets
Keychain hardware (jump rings and key rings)
Mixing cups and stir sticks
Heat gun or butane torch
Gloves and safety goggles
Plastic sheet or drop cloth
Disposable pipettes (optional)
Procedure:
Prepare Your Workspace:
Lay down a plastic sheet or drop cloth to protect your work surface.
Put on gloves and safety goggles to protect yourself.
Mix the Epoxy Resin:
Follow the instructions on your epoxy resin kit to mix the resin and hardener in the specified proportions. Typically, this is a 1:1 ratio.
Stir the mixture thoroughly to ensure it's well combined. Use a slow and steady stirring motion to minimize the introduction of air bubbles.
Add White and Black Pigments:
Separate a portion of the mixed resin into two smaller containers. You'll use one for white and one for black.
Add white epoxy pigment or dye to one of the containers and mix it until you achieve your desired shade.
Add black epoxy pigment or dye to the other container and mix it until you reach your desired shade.
Pour the Resin into the Mold:
Pour a layer of white resin into the silicone mold, filling it partially. This will be the base color.
Next, pour a layer of black resin on top of the white resin. You can create patterns or swirls with the black resin if desired.
Add Gold Foil Accents:
While the resin is still wet, place small pieces of gold foil flakes or cut gold foil sheets onto the surface. You can arrange them in a pattern or let them scatter randomly.
Remove Air Bubbles:
Use a heat gun or butane torch to carefully pass over the surface of the resin to pop any air bubbles that may have formed during pouring. Do this gently to avoid overheating and warping the mold.
Cure the Resin:
Follow the curing time and instructions provided by your epoxy resin kit. Typically, this involves allowing the resin to cure for 24-48 hours at room temperature.
Demold the Keychain:
Once the resin is fully cured, carefully remove the keychain from the silicone mold. Flex the mold to release it without damaging the resin.
Attach Keychain Hardware:
Use jump rings to attach keychain hardware to your epoxy resin piece. Insert a jump ring through the hole at the top of the keychain, and then attach a keyring to the jump ring.
Final Touches:
Inspect your keychain for any rough edges or imperfections. If needed, you can sand the edges with fine-grit sandpaper and polish the surface to a shine.
Your customized white and black epoxy resin keychain with golden foil accents is now ready to use or give as a gift. Enjoy your creative project!
#resinartist
#keychains
#goldenfoil #resinart #beginners #amazingthing